IFM Electronic efector 200 O5 User manual

Installation instructions
Retro-reflective sensor
O5
704234 / 00 06 / 2007
UK
UK

2
Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective
sensor detects objects and materials without contact and indicates their presence
by a switched signal.
Range O5P...: 7 m (retro-reflective sensor with polarization filter); (values referred
to prismatic reflector with
Ø 80 mm and 50 mm).
Installation
Place prismatic reflector or reflective tape behind the object to be detected. Align
the photocell and fasten it to a mounting bracket.
Maximum range is only achieved with precise alignment.
Electrical connection
Disconnect power before connecting the sensor. Connection strictly to the
indications on the type label.
Operation
Check the safe functioning of the sensor.
The LED lights when the object is between the sensor and reflector.
Maintenance
Keep the lens of the sensor free from soiling. For cleaning do not use any solvents
or cleaning agents which could damage the plastic lenses.
•