ifs NS3562-8P-2S-V2 User manual

NS3562-8P-2S-V2 Industrial
Managed Switch User
Manual
P/N 1073704-EN • REV B • ISS 13JUL22

Copyright
© 2022 Carrier. All rights reserved. Specifications subject to change without prior notice.
This document may not be copied in whole or in part or otherwise reproduced without prior
written consent from Carrier, except where specifically permitted under US and international
copyright law.
Trademarks and patents
IFS names and logos are a product brand of Aritech, a part of Carrier.
Other trade names used in this document may be trademarks or registered trademarks of
the manufacturers or vendors of the respective products.
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd, Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRENSENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Version
This document applies to NS3562-8P-2S-V2.
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
FCC compliance
Class A: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Canada
This Class A digital apparatus complies with CAN ICES-003 (A)/NMB-3 (A).
Cet appareil numérique de la classe A est conforme à la norme CAN ICES-003 (A)/NMB-3
(A).
ACMA compliance
Notice! This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Certification
EU directives
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the EMC
Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see: www.recyclethis.info.
Product warnings and
disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. CARRIER FIRE & SECURITY CANNOT PROVIDE ANY ASSURANCE
THAT ANY PERSON OR ENTITY BUYING ITS PRODUCTS, INCLUDING ANY
“AUTHORIZED DEALER” OR “AUTHORIZED RESELLER”, IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and product safety information, please check
https://firesecurityproducts.com/policy/product-warning/ or scan the following codee:
Contact information
EMEA: https://firesecurityproducts.com
Australian/New Zealand: https://firesecurityproducts.com.au/

Product
documentation
Please consult the following web link to retrieve the electronic version of the
product documentation. The manuals are available in several languages.

NS3562-8P-2S-V2 Industrial Managed Switch User Manual 1
Content
Important information 3
Chapter 1 Introduction 6
Package contents 6
Product description 6
Product features 12
Product specifications 16
Chapter 2 Installation 20
Hardware description 20
Installing the industrial managed switch 24
Cabling 27
Chapter 3 Switch management 32
Requirements 32
Management access overview 32
Web management 34
SNMP-based network management 34
Chapter 4 Web configuration 36
Main web page 38
System 39
DHCP server 66
UDLD 75
Simple Network Management Protocol (SNMP) 78
Port management 89
Link aggregation 96
VLAN 104
Spanning Tree Protocol (STP) 130
Multicast 148
Quality of Service (QoS) 174
Access Control Lists (ACL) 198
Authentication 213
Security 254
MAC address table 273
LLDP 277
Network diagnostics 291
Loop protection 296
RMON 298
Ring 307
Power over Ethernet (PoE) 320
Port identification 332

2 NS3562-8P-2S-V2 Industrial Managed Switch User Manual
Chapter 5 Switch operation 333
Address table 333
Learning 333
Forwarding and filtering 333
Store-and-forward 333
Auto-negotiation 334
Chapter 6 PoE overview 335
What is PoE? 335
PoE system architecture 335
Chapter 7 Troubleshooting 337
Appendix A Networking connection 338
Glossary 340

NS3562-8P-2S-V2 Industrial Managed Switch User Manual 3
Important information
Limitation of liability
To the maximum extent permitted by applicable law, in no event will Carrier be liable for
any lost profits or business opportunities, loss of use, business interruption, loss of
data, or any other indirect, special, incidental, or consequential damages under any
theory of liability, whether based in contract, tort, negligence, product liability, or
otherwise. Because some jurisdictions do not allow the exclusion or limitation of liability
for consequential or incidental damages the preceding limitation may not apply to you.
In any event the total liability of Carrier shall not exceed the purchase price of the
product. The foregoing limitation will apply to the maximum extent permitted by
applicable law, regardless of whether Carrier has been advised of the possibility of
such damages and regardless of whether any remedy fails of its essential purpose.
Installation in accordance with this manual, applicable codes, and the instructions of the
authority having jurisdiction is mandatory.
While every precaution has been taken during the preparation of this manual to ensure
the accuracy of its contents, Carrier assumes no responsibility for errors or omissions.
Product Warnings
YOU UNDERSTAND THAT A PROPERLY INSTALLED AND MAINTAINED
ALARM/SECURITY SYSTEM MAY ONLY REDUCE THE RISK OF EVENTS SUCH AS
BURGLARY, ROBBERY, FIRE, OR SIMILAR EVENTS WITHOUT WARNING, BUT IT
IS NOT INSURANCE OR A GUARANTEE THAT SUCH EVENTS WILL NOT OCCUR
OR THAT THERE WILL BE NO DEATH, PERSONAL INJURY, AND/OR PROPERTY
DAMAGE AS A RESULT.
THE ABILITY OF CARRIER PRODUCTS, SOFTWARE OR SERVICES TO WORK
PROPERLY DEPENDS ON A NUMBER OF PRODUCTS AND SERVICES MADE
AVAILABLE BY THIRD PARTIES OVER WHICH CARRIER HAS NO CONTROL AND
FOR WHICH CARRIER SHALL NOT BE RESPONSIBLE INCLUDING, BUT NOT
LIMITED TO, INTERNET, CELLULAR AND LANDLINE CONNECTIVITY; MOBILE
DEVICE AND OPERATING SYSTEM COMPATIBILITY; MONITORING SERVICES;
ELECTROMAGNETIC OR OTHER INTERFERENCE, AND PROPER INSTALLATION
AND MAINTENANCE OF AUTHORIZED PRODUCTS (INCLUDING ALARM OR
OTHER CONTROL PANEL AND SENSORS).
ANY PRODUCT, SOFTWARE, SERVICE OR OTHER OFFERING MANUFACTURED,
SOLD OR LICENSED BY CARRIER, MAY BE HACKED, COMPROMISED AND/OR
CIRCUMVENTED AND CARRIER MAKES NO REPRESENTATION, WARRANTY,
COVENANT OR PROMISE THAT ITS PRODUCTS (INCLUDING SECURITY
PRODUCTS), SOFTWARE, SERVICES OR OTHER OFFERINGS WILL NOT BE
HACKED, COMPROMISED AND/OR CIRCUMVENTED.
CARRIER DOES NOT ENCRYPT COMMUNICATIONS BETWEEN ITS ALARM OR
OTHER CONTROL PANELS AND THEIR WIRELESS OUTPUTS/INPUTS INCLUDING

4 NS3562-8P-2S-V2 Industrial Managed Switch User Manual
BUT NOT LIMITED TO, SENSORS OR DETECTORS UNLESS REQUIRED BY
APPLICABLE LAW. AS A RESULT THESE COMMUNICATIONS MAY BE
INTERCEPTED AND COULD BE USED TO CIRCUMVENT YOUR ALARM/SECURITY
SYSTEM.
THE EQUIPMENT SHOULD ONLY BE OPERATED WITH AN APPROVED POWER
ADAPTER WITH INSULATED LIVE PINS.
DO NOT CONNECT TO A RECEPTACLE CONTROLLED BY A SWITCH.
THIS UNIT INCLUDES AN ALARM VERIFICATION FEATURE THAT WILL RESULT
IN A DELAY OF THE SYSTEM ALARM SIGNAL FROM THE INDICATED CIRCUITS.
THE TOTAL DELAY (CONTROL UNIT PLUS SMOKE DETECTORS) SHALL NOT
EXCEED 60 SECONDS. NO OTHER SMOKE DETECTOR SHALL BE CONNECTED
TO THESE CIRCUITS UNLESS APPROVED BY THE LOCAL AUTHORITY HAVING
JURISDICTION.
WARNING! The equipment should only be operated with an approved power adapter
with insulated live pins.
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of
batteries according to the instructions. Contact your supplier for replacement batteries.
Warranty Disclaimers
CARRIER HEREBY DISCLAIMS ALL WARRANTIES AND REPRESENTATIONS,
WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING ANY
IMPLIED WARRANTIES, THE WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
(USA only) SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. YOU MAY
ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM STATE TO STATE.
CARRIER DOES NOT MAKE ANY CLAIMS OR WARRANTIES TO YOU OF ANY
KIND REGARDING ANY PRODUCT, SOFTWARE OR SERVICE’S POTENTIAL,
ABILITY, OR EFFECTIVENESS TO DETECT, MINIMIZE, OR IN ANYWAY PREVENT
DEATH, PERSONAL INJURY, PROPERTY DAMAGE, OR LOSS OF ANY KIND
WHATSOEVER.
CARRIER DOES NOT REPRESENT TO YOU THAT ANY PRODUCT (INCLUDING
SECURITY PRODUCTS), SOFTWARE, SERVICE OR OTHER OFFERING MAY NOT
BE HACKED, COMPROMISED AND/OR CIRCUMVENTED.
CARRIER DOES NOT WARRANT THAT ANY PRODUCT (INCLUDING SECURITY
PRODUCTS), SOFTWARE OR SERVICE MANUFACTURED, SOLD OR LICENSED
BY CARRIER WILL PREVENT, OR IN ALL CASES PROVIDE ADEQUATE WARNING
OF OR PROTECTION FROM, BREAK-INS, BURGLARY, ROBBERY, FIRE, OR
OTHERWISE.

NS3562-8P-2S-V2 Industrial Managed Switch User Manual 5
CARRIER DOES NOT WARRANT TO YOU THAT ITS SOFTWARE OR PRODUCTS
WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS AND DOES
NOT WARRANT ANY PRODUCTS AGAINST HARMFUL ELECTROMAGNETIC
INTERFERENCE INDUCTION OR RADIATION (EMI, RFI, ETC.) EMITTED FROM
EXTERNAL SOURCES
CARRIER DOES NOT PROVIDE MONITORING SERVICES FOR YOUR
ALARM/SECURITY SYSTEM (“MONITORING SERVICES”). IF YOU ELECT TO HAVE
MONITORING SERVICES YOU MUST OBTAIN SUCH SERVICE FROM A THIRD
PARTY AND CARRIER MAKES NO REPRESENTATION OR WARRANTY WITH
RESPECT TO SUCH SERVICES INCLUDING WHETHER OR NOT THEY WILL BE
COMPATIBLE WITH THE PRODUCTS, SOFTWARE OR SERVICES
MANUFACTURED, SOLD OR LICENSED BY CARRIER.
Intended Use
Use this product only for the purpose it was designed for; refer to the data sheet and
user documentation. For the latest product information, contact your local supplier or
visit us online at firesecurityproducts.com.
The system should be checked by a qualified technician at least every 3 years and the
backup battery replaced as required.
Advisory messages
Advisory messages alert you to conditions or practices that can cause unwanted
results. The advisory messages used in this document are shown and described below.
WARNING: Warning messages advise you of hazards that could result in injury or loss
of life. They tell you which actions to take or to avoid in order to prevent the injury or
loss of life.
Caution: Caution messages advise you of possible equipment damage. They tell you
which actions to take or to avoid in order to prevent the damage.
Note: Note messages advise you of the possible loss of time or effort. They describe
how to avoid the loss. Notes are also used to point out important information that you
should read.

6 NS3562-8P-2S-V2 Industrial Managed Switch User Manual
Chapter 1
Introduction
The description of the IFS NS3562-8P-2S-V2 model is as follows:
Industrial L2+ 8-port 10/100/1000T 802.3at PoE+
+ 2-port 100/1000X SFP wall-mount managed switch
Unless specified, the term “industrial managed switch” mentioned in this user manual
refers to the NS3562-8P-2S-V2.
Package contents
Open the box of the industrial managed switch and carefully unpack it. The box should
contain the following items:
The industrial managed switch × 1
Quick installation guide × 1
3-pin terminal block connector × 1
DIN rail kit × 1
Wall mounting kit × 1
Magnet kit × 1
SFP dust-proof cap × 2
RJ45 dust-proof cap × 8
If any of these are missing or damaged, contact your dealer immediately. If possible,
retain the carton including the original packing materials for repacking the product in
case there is a need to return it to us for repair.
Product description
Wall-mount PoE managed switch with advanced L2+/L4 switching and security
Designed to be installed in a wall enclosure or simply mounted on a wall in any
convenient location, this innovative, wall-mount industrial managed Gigabit Ethernet

Chapter 1: Introduction
NS3562-8P-2S-V2 Industrial Managed Switch User Manual 7
switch offers IPv6/IPv4 dual stack management, intelligent Layer 2 management
functions, and a user-friendly interface. The IFS managed series is able to operate
reliably, stably, and quietly in any environment without affecting its performance.
Featuring ultra networking speed and an operating temperature ranging from -40 to
75°C in a compact but rugged IP30 metal housing, this industrial managed switch is an
ideal solution to meeting the demand for the following network applications:
•Building/Home automation network
•Internet of things (IoT)
•IP surveillance
Redundant ring, fast recovery for critical network applications
The industrial managed switch supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions. It
incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching)
technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input
system into the customer’s industrial automation network to enhance system reliability
and uptime in harsh factory environments. In a certain simple ring network, the
recovery time of data link can be as fast as 20 ms.
Convenient and smart ONVIF devices with detection feature
The managed switch's ONVIF Support is specifically designed to work with video IP
surveillance programs, such as TruVision Navigator, that can display details about
connected ONVIF devices and permit clients to create floor images/maps using the
managed switch, simplifying the deployment of surveillance and other devices for
planning and inspection purposes. IP surveillance program clients can also obtain real-
time surveillance information and online/offline status. PoE reboot control is also
offered at the GUI level.
Intelligent powered device alive check
The industrial managed switch can be configured to monitor connected PD status in
real time via a ping action. After the PD stops working and responding, the industrial
managed switch resumes the PoE port power and puts the PD back to work. The
industrial managed switch greatly enhances the network reliability through the PoE port
resetting the PD’s power source and reducing the administrator management burden.

Chapter 1: Introduction
8 NS3562-8P-2S-V2 Industrial Managed Switch User Manual
Scheduled power recycling
The IFS PoE managed series allows each of the connected PoE IP cameras or PoE
wireless access points to reboot at a specific time each week. This reduces the chance
of an IP camera or AP crash resulting from buffer overflow.
PoE schedule for energy saving
Under the trend of energy saving worldwide and contributing to environmental
protection, the industrial managed switch can effectively control the power supply in
addition to its capability of provideing high Watt power. The “PoE schedule” function
helps you to enable or disable PoE power feeding for each PoE port during specified
time intervals, and is a powerful function to help SMBs or enterprises save power and
money.

Chapter 1: Introduction
NS3562-8P-2S-V2 Industrial Managed Switch User Manual 9
Innovative wall-mount installation
This switch is specially designed to be installed in a narrow environment, such as wall
enclosure or electric weak box. The compact, flat, and wall-mounted design fits easily
in any space-limited location. It adopts the user-friendly “Front Access” design, making
the installing, cable wiring, LED monitoring, and maintenance of the industrial managed
switch placed in an enclosure convenient for technicians. It can be installed by fixed
wall mounting, magnetic wall mounting, or DIN rail, thereby making its usability more
flexible.
SMTP/SNMP trap event alert
The industrial managed switch provides an event alert function to help to diagnose
problems such as a network connection break or an abnormal rebooting response.

Chapter 1: Introduction
10 NS3562-8P-2S-V2 Industrial Managed Switch User Manual
Layer 3 IPv4 and IPv6 software VLAN routing for secure and flexible management
The industrial managed switch provides ultra high transmission performance and
excellent Layer 2 technologies, as well as an IPv4/IPv6 software VLAN routing feature
that allows the crossover of different VLANs and different IP addresses for the purpose
of having highly secure, flexible management and a simpler networking application.
Robust layer 2 features
The industrial managed switch can be programmed for advanced switch management
functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple
Spanning Tree Protocol (MSTP), layer 2 to layer 4 QoS, bandwidth control, and IGMP /
MLD snooping. The industrial managed switch provides 802.1Q Tagged VLAN, and a
maximum of 255 VLAN groups are allowed. Via aggregation of supporting ports, the
industrial managed switch allows the operation of a high-speed trunk combining
multiple ports. It enables maximum up to 2 groups of 2 ports for trunk and also supports
fail-over.
Efficient management
For efficient management, the industrial managed switch is equipped with a console,
web, and SNMP management interfaces. With the built-in web-based management
interface, the managed industrial switch offers an easy-to-use, platform-independent
management and configuration facility. For text-based management mode, the

Chapter 1: Introduction
NS3562-8P-2S-V2 Industrial Managed Switch User Manual 11
industrial managed switch can be accessed via Telnet and the console port. Moreover,
the industrial managed switch offers secure remote management via any standard-
based management software by supporting SNMP v3 connections which encrypts the
packet content at each session.
Powerful security
The industrial switches offer comprehensive layer 2 to layer 4 access control list (ACL)
for enforcing security to the edge. It can be used to restrict to network access by
denying packets based on source and destination IP address, TCP/UDP port number,
or defined typical network applications. Its protection mechanism also comprises
802.1X port-based user and device authentication. With the private VLAN function,
communication between edge ports can be prevented to guarantee user privacy.
Flexible and extendable solution
The additional four mini-GBIC slots built into the industrial managed switch support dual
speed, 100BASE-FX, and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-
optic modules, meaning the administrator now can flexibly choose the suitable SFP
transceiver according to the transmission distance or the transmission speed required.
The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120
kilometers (single-mode fiber or WDM fiber). The switch is well suited for applications
within enterprise data centers and distributions.
Intelligent SFP diagnostic mechanism
The industrial managed switch series supports a SFP-DDM (Digital Diagnostic Monitor)
function that can easily monitor real-time parameters of the SFP transceivers, such as
optical output power, optical input power, temperature, laser bias current, and
transceiver supply voltage.

Chapter 1: Introduction
12 NS3562-8P-2S-V2 Industrial Managed Switch User Manual
1588 time protocol for industrial computing networks
The industrial managed switch is ideal for telecom and carrier Ethernet applications,
supporting MEF service delivery and timing over packet solutions for IEEE 1588 and
synchronous Ethernet.
Product features
Physical port
•Eight 10/100/1000BASE-T gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+
injector.
•Two 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection.
Power over Ethernet
•Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE.
•Up to eight IEEE 802.3af/IEEE 802.3at devices powered.
•Supports PoE power up to 30.8 W for each PoE port.
•Auto detects powered device (PD).
•Circuit protection prevents power interference between ports.
•Remote power feeding up to 100 meters.
•PoE management:
•Total PoE power budget control
•Per port PoE function enable/disable
•PoE port power feeding priority
•Per PoE port power limitation

Chapter 1: Introduction
NS3562-8P-2S-V2 Industrial Managed Switch User Manual 13
•PD classification detection
•Intelligent PoE features:
•Temperature threshold control
•PoE usage threshold control
•PD alive check
•PoE schedule
•PD power recycling schedule
Layer 2 features
•High performance of Store-and-Forward architecture and runt/CRC filtering
eliminates erroneous packets to optimize the network bandwidth.
Storm control support:
•Broadcast / Multicast / Unknown-Unicast
Supports VLAN
•IEEE 802.1Q tagged VLAN
•Up to 255 VLANs groups out of 4094 VLAN IDs
•Provider bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
•Private VLAN Edge (PVE)
•Protocol-based VLAN
•MAC-based VLAN
•Voice VLAN
Supports STP
•STP, IEEE 802.1D Spanning Tree Protocol
•RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
•MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
•BPDU Guard
Supports link aggregation
•IEEE 802.3ad Link Aggregation Control Protocol (LACP)
•Cisco ether-channel (static trunk)

Chapter 1: Introduction
14 NS3562-8P-2S-V2 Industrial Managed Switch User Manual
Provides port mirror (many-to-1)
Port mirroring to monitor the incoming or outgoing traffic on a particular port
Loop protection to avoid broadcast loops
Supports Ethernet Ring Protection Switching (ERPS)
Quality of Service
•Ingress shaper and egress rate limit per port bandwidth control
•Eight priority queues on all switch ports
•Traffic classification:
- IEEE 802.1p CoS
- TOS / DSCP / IP Precedence of IPv4/IPv6 packets
- IP TCP/UDP port number
- Typical network application
•Strict priority and Weighted Round Robin (WRR) CoS policies
•Supports QoS and In/Out bandwidth control on each port
•Traffic-policing policies on the switch port
•DSCP remarking
Multicast
•Supports IGMPv4 snooping v1, v2, and v3
•Supports IGMPv6 MLD snooping v1 and v2
•Querier mode support
•IGMP snooping port filtering
•MLD snooping port filtering
•Multicast VLAN Registration (MVR) support
Security
•Authentication
−IEEE 802.1x Port-Based / MAC-Based network access authentication
−Built-in RADIUS client to co-operate with the RADIUS servers
−TACACS+ login users access authentication
−RADIUS / TACACS+ users access authentication
•Access Control List (ACL)
−IP-based ACL
−MAC-based ACL

Chapter 1: Introduction
NS3562-8P-2S-V2 Industrial Managed Switch User Manual 15
•Source MAC / IP address binding
•DHCP snooping to filter distrusted DHCP messages
•Dynamic ARP inspection discards ARP packets with invalid MAC addresses to IP
address binding.
•IP source guard prevents IP spoofing attacks.
•Auto DoS rule to defend against DoS attacks.
•IP address access management to prevent unauthorized intruders.
Management
•IPv4 and IPv6 dual stack management
•Switch management interfaces:
−Console / Telnet Command Line Interface
−Web switch management
−SNMP v1 and v2c switch management
−SSH / SSL and SNMP v3 secure access
•IPv6 IP address/NTP/DNS management
•Built-in Trivial File Transfer Protocol (TFTP) client
•BOOTP and DHCP for IP address assignment
•System maintenance
−Firmware upload/download via HTTP / TFTP
−Dual images
−Reset button for system reboot or reset to factory default
•DHCP relay
•DHCP Option 82
•User privilege levels control
•NTP (Network Time Protocol)
•Link Layer Discovery Protocol (LLDP) and LLDP-MED
•SFP-DDM (Digital Diagnostic Monitor)
•Network diagnostic
−ICMPv6/ICMPv4 Remote Ping
−Cable diagnostic technology provides the mechanism to detect and report
potential cabling issues
•SMTP/Syslog remote alarm
•Four RMON groups (history, statistics, alarms, and events)
•SNMP trap for interface Link Up and Link Down notification

Chapter 1: Introduction
16 NS3562-8P-2S-V2 Industrial Managed Switch User Manual
•System log
Product specifications
Hardware Specifications
Copper Ports
Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
Two 1000BASE-SX/LX/BX SFP interfaces (port 9 and port 10)
Compatible with 100BASE-FX SFP
PoE Injector Ports
Eight ports with 802.3at/af PoE injector function (Port-1 to Port-8)
Switch Architecture
Store-and-Forward
Switch Fabric
20 Gbps / non-blocking
Throughput
14.88 Mpps @ 64 bytes
Address Table
8K entries, automatic source address learning and aging
Shared Data Buffer
4 Mbits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
9 Kb
Reset Button
< 5 seconds: System reboot
> 5 seconds: Factory Default
Enclosure
IP30 aluminum case
Installation
DIN rail kit, wall-mount, and magnetic wall mount
Dimensions (W×D×H)
180 × 24.4 × 140 mm
Weight
681 g
Connector
Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
- Pin 3 for earth ground
DC power jack with 2.0 mm central pole
LED
System:
PWR (Green)
Ring (Green)
Ring Owner (Green)
Per 10/100/1000T RJ45 PoE+ Ports:
PoE in-use (Orange)
1000 LNK/ACT (Green)
Per SFP Interface:
100 LNK/ACT (Orange)
1000 LNK/ACT (Green)
Power Requirement
Dual 48~56 VDC (>51 VDC for PoE+ output recommended)