Sonoff S-MATE User manual

Switch Mate
User manual V1.2
S S1 S2 S3
L3
L2
LL1
S-MATE

Upper Cover
Battery Compartment
Dip Switch
Features
123
S-MATE is an eWeLink-Remote sub-device, used to connect with an ordinary rocker or pulse
switch. The on/off of the gateway can be controlled at close range by sub-device locally after it
is added to the gateway, and the sub-device can also trigger other smart devices in the smart
scene through the cloud.
ON O FF
ON O FF
ON O FF
ON O FF
Product Introduction
LED indicator
The device weight is less than 1 kg. The installation height of less than 2 m is recommended.
1. Pull out the battery insulation sheet
Operating Instruction
2. Power off
Please install and maintain the device by a professional electrician. To avoid electric shock
hazard, do not operate any connection or contact the terminal connector while the device is
powered on !

3. Wiring instruction
NL in LOut N
S S1 S2 S3
L3
L2
LL1
LOut
100-240V AC
N N
L
L1
L2
L3
NL in LOut N
LOut
N N
NL in LOut N
LOut
N N
The wiring instruction of connecting the S-MATE with three MINIR3:
S
S1
S2
S3
The dip switch is factory set to the right. Please toggle the dip switch to the left if connection
a pulse switch to the device.
S S1 S2 S3
L3
L2
LL1
100-240V AC
L
L1
S
S1
NL in LOut N
LOut
N N
The wiring instruction of connecting the S-MATE with one MINIR3:
翘板开关
Make sure the neutral wire and live wire connection is correct.
Dip Switch
Rocker Switch
There are L/L1/L2/L3 on the S-MATE which can be used as terminal connectors, but you have
options to directly connect the L wire of MINIR3 to the L wire in the switching box without
going through the S-MATE.

S-MATE
100-240V ~ 50/60Hz 16A Max
PCV0
51x44.5x24mm
-10℃~40℃
100-240V ~ 50/60Hz 16A Max
CR2032
“eWeLink remote” Transmission Distance
Power supply
Battery model
Model
Input
Output
Working temperature
Dimension
3V button cellx 1
Specifications
Shell material
Up to 50M
MIN IR3
Sched ule Time r LoopTim er
Dev iceS ettings
Sho rtcu ts
Ope ration r ecord
>
>
>
>
>
0/32
>
>
Net work in dicat or
>
Ass ign loc ation
Sha re
Crea te grou p
WeCh at cont rol
LAN c ontrol
Devi ce Sett ings
eWeL ink Rem ote Sce ne
eWeL ink Rem ote
Powe r-on Se tting s
>
0/8
eWeLink-Remotesub-devices
4. Add to eWeLink-Remote gateway
Please turn off the electricity before replacing the battery of device.
Replace batteries
Add
SS1
①You are allowed to add S-MATE to the devices that have eWeLink-Remote gateway such as MINIR3
and etc. on their setting page.
②Add S-MATE on Smart Scene to trigger other devices.