AVGear AVG-SM-2.0 User manual

AVG-SM-2.0
The AVG-SM-2.0 is an ultra-thin HDMI signal
manager supporting HDMI V2.0. It is designed to
enhance the compatibility between HDMI sources
and displays. The transmission of 4k×2k@60Hz
(max) signal from source to display is up to 10m.
In addition, it supports 4K downscaling to 1080p
output, and HDCP follows the display device to
ensure device compatibility.
•Input supports HDMI V2.0.
•Supports HDCP 2.3.
•Supports 4K signal downscaling
to 1080p.
•HDCP processing follows
displays to ensure compatibility.
•The transmission distance of
4K@60Hz 4:4:4 signal from
source to display is up to 10m.
•The unit can be powered by
HDMI source or by external
power via Micro-USB.
•Easy to install and simple to
operate.

AVG-SM-2.0
PLEASE READ THIS PRODUCT MANUAL CAREFULLY
BEFORE USING THIS PRODUCT.
This manual is only for operational instruction only, and not to be used
for maintenance. The functions described in this version are current as
at June 10th. Any changes of functions and operational parameters
will be updated in future manual versions. Please refer to your dealer
for the latest product details.
2021 V1.1

AVG-SM-2.0
SAFETY OPERATION GUIDE
To guarantee the reliable operation of the equipment and safety of the user, please
abide by the following procedures in installation, use and maintenance:
1. The system must be earthed properly. Please do not use two blade plugs and
ensure the alternating power supply ranges from 100v to 240v and from 50Hz to
60Hz.
2. Do not install the product in an environment where it will be exposed to extreme
hot or cold temperatures.
3. This unit will generate heat during operation, please ensure that you allow
adequate ventilation to ensure reliable operation.
4. Please disconnect the unit from mains power if it will be left unused for a long
time.
5. Please DO NOT try to open the casing of the equipment, DO NOT attempt to
repair the unit. Opening the unit will void the warranty. There are high voltage
components in the unit and attempting to repair the unit could result in serious
injury.
6. Do not allow the unit to come into contact with any liquid as that could result in
personal injury and product failure.

AVG-SM-2.0
TABLE OF CONTENTS
Introduction...................................................................................................................1
Product Introduction..............................................................................................1.1
Features ...............................................................................................................1.2
What’s in the box ..................................................................................................1.3
Specifications ..................……………………………………………………………………2
Product Appearance and Operation ...........................................................................3
System Connection ......................................................................................................4
System Diagram...................................................................................................4.1

AVG-SM-2.0
1. Introduction
1.1 Product Introduction
The AVG-SM-2.0 is an ultra-thin HDMI signal manager supporting HDMI V2.0. It is
designed to enhance the compatibility between HDMI sources and displays. The
transmission of 4k×2k@60Hz (max) signal from source to display is up to 10m. In
addition, it supports 4K downscaling to 1080p output, and HDCP follows the display
device to ensure device compatibility.
1.2 Features
•Input supports HDMI V2.0.
•Supports HDCP 2.3.
•Supports 4K signal downscaling to 1080p.
•HDCP processing follows displays to ensure compatibility.
•The transmission distance of 4K@60Hz 4:4:4 signal from source to display
is up to 10m.
•The unit can be powered by HDMI source or by external power via Micro-
USB.
•Easy to install and simple to operate.
Note: It is recommended to use Micro-USB to power the device if
insufficient power is supplied by the HDMI source device.
1.3 Package List
•1 x AVG-SM-2.0
•1 x User Manual
•1 x Velcro Tape
•1 x Micro-USB cable
Note: Please contact your distributor immediately if any damage or defect in the
components is found.

AVG-SM-2.0
2. Specifications
Input & Output
Input
(1) HDMI
Input Connector
(1) 19-pin type-A female HDMI
Output
(1) HDMI
Output Connector
(1) 19-pin type-A female HDMI
General
Transmission Distance
Input≤5m; Output≤5m
HDCP Standard
Input supports HDCP2.3
EDID Management
EDID pass-through
Bandwidth
18Gbps
Work Temperature
-10~55℃
Relative Humility
10%-90%
Dimensions (W*H*D)
55mm x 12.5mm x 70mm

AVG-SM-2.0
3. Product Appearance
①Power LED: The LED illuminate green when it is powered on
②DC 5V: Micro-USB power port, insert DC 5V 1A power adapter
③IN: Connect with HDMI source
④OUT: Connect with HDMI display
⑤4K→1080p:
ON: Enable downscale 4K signal to 1080p.
OFF: Pass-through
4. System Connections
4.1 System Diagram
IN
DC 5V OUT
4K 1080p
4 51 2 3