iiNet BizPhone W76P Troubleshooting guide

iiNet BizPhone Cordless W76P Quick Startup Guide
Page | 1 of 2
Confidential
IP DECT W76P
Quick Startup Guide
Packaging Contents
The following contents are included in your W76P package:
Note: W76P DECT IP hone consists of one W70B base station
and one W56H handset.
Assembling the Phone
1. Connect the base station power and the network in one of the
following ways, as shown below.
2. Attach and remove the base stand.
3. Insert the battery into the handset.
4. Attach the belt clip to the handset.
5. Connect the charging cradle and charge the handset.
Note:
The handset should be used with original power adapter
(5V/0.6A) only. The use of the third-party power adapter may
cause damage to the base station.
The charging status of the handset is indicated in the top
right-hand corner of the LCD screen.
NOTE: Not all features mentioned in the Yealink User Guide are available on BizPhone Services

P a g e | 2 of 2
Confidential
START UP THE PHONE
Startup the Phone
The IP Phone is pre-registered to the base station. After the IP
Phone is connected to the network and the power, it will
automatically start the initialization process by connecting to TPG
BizPhone’s servers to obtain the configuration and updates
(maximum 10 minutes).
The LCD screen will indicate the current status of the process
(initializing or configuration updating). The phone may reboot few
time during this process. After the final reboot, the phone is ready
to use.
BASIC OPERATIONS
Turning Handsets On
•Press ,then the LCD screen lights up.
•Place the handset in the charger cradle. The handset will be
turned on automatically.
Turning Handsets Off
•Long press to turn the handset off.
HANDSET SETTINGS
Add a Contact
•Press the OK key to enter the main menu and then select
Directory and Press OK.
•Press the Options soft key, and then select New Contact
and press OK.
•Enter the desired values in the Name, Number and Mobile
fields.
•Press the Save soft key to accept the change.
Volume Adjustment
•Press or during a call to adjust the receiver volume aof
the speakerphone/earpiece.
•Press or when the handset is idle to adjust the ringer
volume.
BASIC CALL FEATURES
Placing Calls
•Enter the desired number when the handset is idle.
•Press , or to dial out.
Answering Calls
•Press the Accept soft key or press or press or press
.
Ending Calls
•Press .
Call Hold
•Press Options soft key during a call, and then select Hold
and press OK.
•To resume the call, press the Resume soft key.
Call Transfer –Blind Transfer
•Press the Options soft key during a call, and then select
Transfer and press OK.
•Enter the number you want to transfer the call to.
•Press the Transfer soft key.
Call Transfer –Attended Transfer
•Press the Options soft key during a call, and then select
Transfer and press OK.
•Enter the number you want to transfer the call to.
•Press , or to dial out.
•Once the receiving party answers, announce the call.
•Press the Transfer soft key to complete the transfer.
Conference Call
•Press the Options soft key during a call, and then select
Conference.
•Enter the number you want to transfer the call to.
•Press , or to dial out.
•When the second party answers, press the Conference soft
key to connect the calls.
Call Forward
•Press OK key to enter the main menu, and then select Call
Features -> Call Forward.
•Press or to highlight the desired line, and then press
the OK soft key.
•Press or to highlight the desired forwarding type
(Always/Busy/No Answer), and then press the OK soft key.
•Select Enabled from the Status field.
•Enter the number you want to forward the incoming calls to in
the Target field.
•For No Answer Forward, press or to select the
desired ring time to wait before forwarding in the After Ring
Time field.
•Press the Save soft key to accept the change.
Accessing Call History
•Press History soft key.
•Press or to choose All Calls, Missed Calls, Placed
Calls, or Received Calls.
NOTE: For more information about other features, refer to the BizPhone User Reference Guide (contact your Administrator)