iLive ISBQ270 User manual

Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding - type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. When the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long
periods of time.
• Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• Use only with a cart, stand, tripod, bracket, or table specied by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
Overview
Desktop Clock Radio with Wireless Charging
User’s Guide for Model ISBQ270 v2529-01
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
• Mains plug is used as disconnect device and it should remain readily operable
during intended use. In order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected from the mains socket
outlet completely.
• WARNING: Shock hazard - Do Not Open.
• CAUTION: Use of controls or adjustments or performance of procedures
other than those specied may result in hazardous radiation exposure.
• WARNING: Changes or modications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
• WARNING: Do not place this unit directly onto furniture surfaces with any
type of soft, porous, or sensitive nish. As with any rubber compound made
with oils, the feet could cause marks or staining where the feet reside. We
recommend using a protective barrier such as a cloth or a piece of glass
between the unit and the surface to reduce the risk of damage and/or staining.
• WARNING: Do not ingest battery, chemical burn hazard.
• Battery shall not be exposed to excessive heat such as sunshine, re or the
like.
• Lithium batteries, like all rechargeable batteries, are recyclable and should
be recycled or disposed of according to state and local guidelines. They
should never be disposed of in normal household waste and they should never
be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
Features
• Bluetooth wireless - range 59 ft.
• Voice prompts announce speaker
functions
• FM scan radio
• Rotary volume control
• 3.5mm aux in
• SD port - supports MP3 le
format
• Built-in rechargeable battery
• Battery life: approx. 10 hours at
50%
Includes
• DC power adapter
• User’s manual
• 3.5mm audio cable
WARNING: To reduce the risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing
to qualied service personnel.
WARNING: This product can expose you to
chemicals including lead, which is known to
the State of California to cause cancer. For
more information go to: www.P65Warnings.
ca.gov This product meets and complies with
all Federal regulations.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
“dangerous voltage” within the product’s
enclosure that may be of sucient magnitude
to constitute a risk of electric shock to persons.
Control Panel
Power Pad
Charging the Battery
1. Play/Pause/Mode: Press to play/pause a track. Press and hold to switch to
change audio mode between Bluetooth, aux in, SD and FM radio. Press to
scan all available stations when in FM radio mode. In Standby Mode tap
continuously to set sleep timer (10-90 minutes). Press and hold to set the
clock time.
2. Next/Previous: Press to skip to next track or replay previous track. In FM
Mode press to cycle through radio stations.
3. Power/Play: Press and hold to power ON/OFF. Press to enter Standby
Mode.
4. Power Pad: Place phone onto power pad to charge wirelessly.
5. Volume Wheel
1
2
3
5
4
To wirelessly charge your phone place your device onto the Power Pad located on
top of the clock radio as shown below. Note: the unit must be connected to the DC
power adapter and a standard wall outlet for wireless charging to work.
To power the unit or charge the internal battery, connect the DC Power Input on
the back of the clock to a standard power outlet using the included AC/DC power
adapter.
Note: Must use the included DC adapter if you want to use the wireless
charging feature.

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: par[email protected]
Copyright © 2020 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (included).
1. Make sure the unit is not in Standby Mode by pressing the Power button.
2. Connect a 3.5mm audio cable to the Aux In on the unit and the
audio output/headphone jack on an audio device.
3. Press and hold the Play/Pause/Mode button repeatedly until the unit switches
to Aux in mode.
4. Use the controls on the connected device to select and play audio.
Note: Newer phone models may require an adapter (lighting to-3.5mm headphone
adapter for iPhone,) or (USB-C to 3.5mm audio adapter,) for android.
SD Card
1. Load an SD memory card into the SD media port on the back of the clock.
2. The unit will automatically switch to SD mode.
3. Use the controls on the speaker to select and play and pause audio from the connected
SD card.
FM Radio
1. To use the FM radio, make sure the unit is in Play Mode by pressing the Power button.
2. Press and hold the Play/Pause/Mode button to switch to FM radio mode and use the
Next/Previous buttons to manually search stations.
Auto Search and Saving Stations
Bluetooth Wireless
Pairing & Playing Audio
1. When rst powered on, the speaker defaults to Bluetooth Mode and is ready to pair
automatically. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select ISBQ270 in the Bluetooth
settings to pair. If need be, refer to the user’s manual for your specic device for more
information.
3. When successfully paired, a voice will announce the connection.
4. Use the controls on the connected Bluetooth device to select and play audio. Use
the speaker controls or the connected Bluetooth device to play, pause, and adjust the
volume level.
5. After initial pairing, the speaker will automatically connect to the last Bluetooth device
used whenever it is in Bluetooth Mode. Note: If your device should become unpaired
or you nd it is unable to connect, quickly press the Play/Pause/Mode twice button
to enter to Pairing Mode. A voice will announce,“Bluetooth is connecting,”and you can
connect to the speaker manually.
Clock
Setting the Clock
Make sure to change the clock to Standby Mode by pressing the Power button.
1. Press the Power button to change to Standby Mode.
2. Press and hold the Play/Pause/Mode button until the display starts to blink, the clock
is now in alarm set mode. You will need to Press and hold Play/Pause/Mode button
again until the hour indicator blinks signifying you are in clock set mode. Use the
Volume Wheel to select the desired hour. (Note: When in PM the PM indicator will light
up. When in AM the PM indicator will turn o).
3. Once you have selected the correct hour, press the Play/Pause/Mode button to
conrm. You may now adjust the minutes. Use the Volume Wheel to adjust the
minutes to the desired time.
4. Once you have selected the desired minute, press the Play/Pause/Mode button to
nish setting the time.
Alarm & Sleep Timer
Setting the Alarm
Make sure to change the clock to Standby Mode by pressing the Power button.
1. Press the Power button to change to Standby Mode.
2. Press and hold the Play/Pause/Mode button until the hour and the alarm clock
indicator begin to blink.
3. Use the Volume Wheel to select the desired hour. (Note: When in PM the PM indicator
will light up. When in AM the PM indicator will turn o).
4. Once you have selected the correct hour, press the Play/Pause/Mode button again to
adjust the minute. Use the Volume Wheel to adjust the minutes to the desired time.
5. Once you have selected the correct minute, press the Play/Pause/Mode button again.
Use the Volume Wheel to select “ON” to enable the alarm. Select “OFF” to disable the
alarm.
6. The alarm will then give you the choice to choose the frequency of the alarm. “One”
means the alarm will only go o one time “All” means the alarm will go o everyday at
the time you set. Press Play/Pause/Mode when you have selected the option you want.
7. The unit will then let you choose your alarm tone. “Bu”means the alarm will be a
standard alarm buzz. “SD” means the alarm will play the last song playing from your SD
memory card ( SD card must be inserted). “Fn” means the alarm will turn on the radio.
Press Play/Pause/Mode when you have selected the option you want.
8. The alarm is now set.
Sleep Timer
The sleep timer will automatically put the radio into Standby Mode after the amount of time
you selected expires. Ex: If you select “10” the clock will play for 10 minutes and then it will switch
to Standby Mode.
1. Press the power button to change to Standby Mode.
2. Press the Play/Pause/Mode button repeatedly until you select the desired sleep time,
(0 mins - 90 mins).
3. Once the selected sleep time has expired the clock radio will automatically go into
Standby Mode.
4. To turn o the sleep timer feature set the sleep timer to “00.”
1. To use the auto search function press the Play/Pause/Mode button while in FM radio
mode.
2. The radio will auto search stations and save them.
3. To cycle through the saved stations press the Next/Previous buttons.