IMMAX Leather User manual

LED table lamp
IMMAX Leather
User manual

Product description
1. even and soft light for your eyes
2. high brightness and luminous flux thanks to a high-performance LED light source
3. elegant control thanks to the highly sensitive touch controller
4. three levels of setting the lighting brightness
5. flexible gooseneck allows you to adjust the lighting angle according to your requirements
6. energy-saving - saves up to 80% of electricity consumption
7. environmentally friendly - without mercury and lead, low ecological burden
8. without fragile glass components
9. long service life - up to 30 000 hours
10. high resolution display
Lamp arm adjustment range
1. When adjusting the flexible arm, hold the base of the lamp with your hand
2. Adjustable range: 150°(excessive adjustment may cause damage)
Connect the adapter and press the ON/OFF button
Changing the battery

color temperature
5000 –6000 K
CRI
>80 Ra
input current
5 V 1A
material
ABS + rubber
luminosity
200lm
input power
7W
Alarm clock setting
1. in normal mode, press the MODE button to set the alarm clock
2. in the alarm clock setting mode, press the SET button to enter the date and time, press the
SET button again to set the other values in the following order: hours-minutes-year-month-
day-back
3. press UP and DOWN for setting
4. in the alarm clock setting mode, press the UP and DOWN buttons to open or close the
snooze or the alarm clock, press again to enter the following functions: select the alarm clock
- select the snooze - end the alarm clock and the snooze
5. the alarm clock will ring for one minute, turn it off by pressing the SET button or any other
button
Setting the time and date
1. in normal mode, press the SET button and enter the date and time, press the SET button
again to set other values in the following order: hours-minutes-year-month-day-back
2. press the UP and DOWN buttons to set the day of the week
3. press the MODE button or if no button is pressed for more than 60 seconds it will confirm
the setting and the time will be displayed
4. in normal mode, press the UP button to select 12/24 hour format
temperature
alarm clock
date
hours
minutes
day

Warning
1. do not disassemble the product by yourself, you may get an electric shock
2. use only the included adapter
3. do not use the product in a very hot or humid environment
4. do not look directly into the LED light sources, it could damage your eyes
5. in the cases listed below, disconnect the lamp from the power source and do not use
it anymore:
othe power supply cable or connector is damaged
othe lamp is wet
othe lamp’s body or arm is damaged
othere is smoke or sparks coming from the lamp
owhen the LED light sources are flashing abnormally.