IMOU CCTV-KIT-LITE User manual

1.2.51.32.18870-000
Smart Outdoor
Wi-Fi Security Kit
Quick Start Guide

Recorder × 1
(1TB built-in HDD)
Packing List
KIT QSG × 1Camera × 4
Power Adapter
Network Cable
Mouse
SATA Power Cable
SATA Cable
Rubber Feet Package
Screw Package
NVR QSG
1TB HDD (built-in)
Power Adapter
Waterproof Connector
Screw Package
Positioning Map
IPC QSG

Recorder
HDD Status Indicator
Network Status Indicator
Power Status Indicator
USB Port

LED Indicator Status
Network status indicator o
Network status indicator on
Power status indicator on
HDD malfunction
Network connection is normal
Network connection failed
Power connection is normal
HDD status indicator o
HDD status indicator on
Recorder Status
HDD is working properly
Power Input Port
Ethernet Port HDMI Port
Audio Outpot Port
VGA Port USB PortAudio Input Port

Camera
LED Indicator
Lens
Reset Button
Built-in Mic
Wi-Fi Antenna

Press and hold the reset button for 10 s to reset the camera.
Micro SD Card Slot
The pattern of the LED indicator is included in the following table.
LED Indicator Status
Green light ashing
Green light on
Red light ashing
Green and red lights
ashing alternately
Powered o/LED turned o
Rebooting after reset
Booting
Device malfunction
Waiting for network
Operating properly
Network connection failed
Red light on
Firmware updating
Camera Status
O

Connection
The recorder supports wireless connection.
Step 1 Put cameras next to the Recorder and turn them on, and then
turn on the Recorder.
The cameras will pair to the Recorder automatically in 120 s.
Step 2 Initialize the recorder. For details, see "Local Basic Operation".
Step 3 Unplug the power cables of the cameras.
Step 4 Install cameras somewhere as needed.
The dotted line in the gure means that you can connect the
recorder to a monitor through a VGA cable or HDMI cable.
Choose one as needed.
Wireless IPC
Recorder
Network Cable
HDMI or VGA Cable
Router
Monitor

Make sure that the mounting surface is strong enough to hold
at least three times of the device weight.
Step 1Drill screw holes on the mounting surface as the positioning map
shows, and then put in the expansion bolts.
Step 2Attach the camera pedestal to the mounting surface with the
self-tapping screws.
Step 3Power up the camera, and then adjust the lens to the ideal angle.
Camera Installation
Camera
Self-tapping Screw
Positioning Map
Expansion Bolt
Mounting Surface

3 Startup Wizard
2 Initialization
1 Power On and O
For the rst-time login, you can congure the recorder quickly by
Startup Wizard, and set options such as general settings, Imou cloud,
network settings and record settings.
Local Basic Operation
Startup:
Connect a monitor to the recorder, and then plug in the power to start
the recorder.
Shutdown:
SelectMain Menu > SHUTDOWN to go to theSHUTDOWN
interface, and then clickShut down. Unplug the recorder after the
monitor is blank.
After turning on the recorder for the rst time, you need to initialize
the recorder by the following steps.
1) Set parameters for the administrator (the default username is
admin).
2) Draw an unlock pattern for login.
3) Congure the password protection parameters.
Make sure that the linked email address for resetting password
is correct.
Do not force the recorder to shut down (or unplug the recorder) when the
interface is indicatingSaving data or the recorder is recording videos.

5 Playback
SelectMain Menu > Playback or right-click on the live interface and
selectSearch.
You can play back records according to the congured record type,
record time and channel.
4 Live View
After you logged in, the system goes to multiple-channel live view
mode by default. You can view the live video of each channel.

App Operation
Step 2Tap +at the top-right corner of theDevice tab, and then scan the
QR code or enter the serial number of the recorder to add it to
the App.
Step 1Scan the QR code below to install Imou Life App. Register and then
log in to Imou Life App.
Skip Step 1 if you have completed the download and
registration of Imou Life App in the Startup Wizard.

Step 3 After adding the recorder to the App, you can perform
operations
such as viewing
video records, viewing alarms, setting alarm and sharing the

FAQ
Q：Why are there no video records in local playback?
Q：Why is the playback time inconsistent with actual time after
enabling cloud storage?
A：Ensure that the IPC time is consistent with recorder time. Select
SYSTEM > GENERAL > General to enable IPC Time Sync. You can
also select SYSTEM > GENERAL > Date&Time to modify recorder
time.
Q：How to add a wireless IPC to a running recorder?
A：Put the wireless IPC next to the recorder and turn it on.
Right-click the local GUI and select Wireless Pairing. After pairing
completed, install the wireless IPC at a place as needed.
Q：Why does the recorder fail to start?
A：After the recorder is powered on, observe the power status
indicator on the front panel. If the blue light is o, check the
wiring. If the blue light is on and the recorder failed to start,
contact the after-sales service.
A：Three possible reasons: 1. Wiring error. 2. HDD malfunction. 3.
Record function is not enabled.
Check method:
1. Check the HDD status indicator. If the light is on , the HDD is
working abnormally.
2. Select STORAGE > HDD DETECT to run the diagnosis. Replace
the HDD if there are damages.
3. Right-click the local GUI and select Manual > Record to check if
the record function is enabled.

Kit de sécurité Wi-Fi
extérieur intelligent
Guide de démarrage rapide

1 enregistreur
(disque dur 1To intégré)
Contenu de l’emballage
1 guide de
démarrage rapide du
4 caméras
●Adaptateur secteur
●Câble réseau
●Souris
●Câble d’alimentation
SATA
●Câble SATA
●Lot de pieds en
caoutchouc
●Paquet de vis
●Guide de démarrage
rapide du NVR
●Disque dur de 1To
(intégré)
●Adaptateur secteur
●Manchon d’étanchéité
●Paquet de vis
●Carte de positionnement
●Guide de démarrage rapide de la
caméra IP

Enregistreur
Indicateur d’état du disque dur
Indicateur d’état du réseau Indicateur d’état
de l’alimentation
PortUSB

Statut de l’indicateur lumineux
Indicateur d’état du réseau éteint
Indicateur d’état du réseau allumé
Indicateur d’état de l’alimentation allumé
Mauvais fonctionnement du disque dur
La connexion réseau est normale
Échec de connexion de réseau
Le branchement électrique est normal
Voyant d’état du disque dur éteint
Indicateur d’état du disque dur allumé
Statut de l’enregistreur
Le disque dur fonctionne correctement
Port d’entrée d’alimentation
Port Ethernet PortHDMI
Port de sortie audio
PortVGA PortUSBPort d’entrée
audio