IMOU Ranger IQ Setup guide

How to set up Wi-Fi with camera’s soft AP signal？
This article applies to: Ranger IQ, Cube, Cube 4MP.
We use Ranger IQ as an example.
Before set up the Wi-Fi, please scan the following QR code or search “Imou Life”in Google Play or
App Store to download and install Imou Life App.
Tip: If you have installed the App, please update it to the latest version.
Step 1:
Run Imou Life App, and then register an account for the first use.
Step 2：
Power on your device, and wait till the camera indicator flashes green.
Tip: If the camera doesn’t flash green, please press the reset button for 10s to reset the camera,
then start again.

Step 3:
Scan the QR code in the device label with the App, then start to configure the network.
Step 4:
Your smartphone will connect to the camera’s soft AP Wi-Fi signal automatically.
Tip: If your phone failed to connect to the signal automatically for some reason, please go to your
phone’s Wi-Fi connecting page, connect your phone to the Wi-Fi signal showing on the app page,
then come back to Imou Life page. The Wi-Fi password is the safety code on the device label.
Step 5:
Select your router’s Wi-Fi signal to connect your camera, and type in the Wi-Fi password.

Step 6:
Your device will connect to you Wi-Fi signal, then connect to Imou cloud and bind to your Imou
account automatically.
Tip: When connecting the device indicator will flash red, after successfully connected the
indicator will stay green.
Step 7:
Name your device, and enjoy it!

If you have any further question, please feel free to contact us: [e-mail]
We will reply you within 24Hours.