IMOU Turret User manual

Turret
Quick Start Guide
www.imoulife.com

Welcome
Thank you for choosing IMOU.
We are devoted to providing you easy smart home products.
If you have problems using the product, please contact
our service team before returning your product.
Our service mail: [e-mail]
Frequently asked questions can be found at
imoulife.com/support/help

Package content
Camera introduction
Power Adapter ×1 Screw Package ×1
Camera ×1 Mounting Plate ×1 Waterproof Connector ×1Positioning Map ×1
Quick Start Guide ×1
Build-in Mic
Lens
Spotlight
LED Indicator

Note:
Double-press the reset button to enable the camera hotspot.
The pattern of the LED indicator is included in the following table.
Press and hold the reset button for 10 s to reset the camera.
Micro SD Card Slot
Built-in Speaker
Reset Button
LED Indicator Status
Off
Booting
Device malfunction
Network connection failed
Pairing failed
Red light on
Device Status
Green light on
Waiting for network
Enter Pairing mode
Operating properly
Green light flashing
Red light flashing
Firmware updating
Powered off/LED turned off
Rebooting after reset
Green and red light
flashing alternately

1
Windows
Imou Life
Setup
WIFI Name
Password
Next
Setup
Done
2

Ceiling Mounting
3
Camera
Expansion Bolt
2
Self-tapping Screw
Mounting Plate
1
Positioning Map
Mounting Surface
2
Wall Mount:Adjusting Angle:
+60
-30

Troubleshooting
Problem Solution
The camera cannot work
normally or start
• Make sure that the network cable is connected well, and the NVR or switch
supports POE power supply. When the indicator light on the NVR or switch
flashes, it means that the camera is powered up.
Where are the recorded
videos saved
• Scene1
Recorded videos are saved in NVR.
• Scene2
When the Imou cloud is enabled, recorded videos are saved in Imou cloud.
The IR effect is not good • The infrared light is reflected to the lens, so the effect is not good.Adjust the
ens angle to avoid occlusions around the lens.