In-situ Rugged TROLL 200 User manual

Rugged TROLL Quickstart Guide
Instrument &Required Accessories
1. Rugged TROLL instrument
2. One of the following communication solutions:
lDirect-read cable and Wireless Rugged TROLL
Com
lDirect-read cable and USBRugged
TROLLCom (200 only)
lDocking station
3. Bluetooth-enabled mobile device or Windows PC
Getting Started
1Connect the instrument to the communication device.
Connect Rugged TROLL to one of the three available communication devices (Wireless Rugged TROLL Com, Rugged
TROLL Com or Docking Station).
Unscrew cap from
instrument.
Unscrew cap from end of
cable.
Attach cable to Rugged
TROLL.
Connect cable to Wireless
Rugged TROLLCom.
or
Line up instrument tab with
docking station slot.
Insert Rugged TROLL in
docking station
Plug docking station into
your PC's USB port.
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, HydroVu™, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, SmarTROLL™, TROLL, VuSitu, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.©. All
rights reserved. This product may be covered by patents identified at www.in-situ.com/patents
0091332 | 2019-04-09

2
or
(Rugged TROLL 200 only)
Open Rugged TROLL Com's
battery compartment door.
Insert 9-volt battery.
Secure direct-read cable to
TROLLCom.
Connect cable to instrument
and plug into PC's USB port.
2Connect to the software.
Option 1: Connect to the VuSitu mobile app (recommended)
Download the VuSitu mobile app from the Google Play Store at play.google.com.
Turn on the Wireless
TROLLCom and open
VuSitu mobile app. Select
Choose or Add a Device.
Select Add New Device
when connecting for the
first time.
Locate the serial number
under the yellow lid on top
of the Wireless Rugged
TROLLCom.
From device's Bluetooth
Settings screen, tap serial
number of instrument to
connect. Tap the device's
Back button.
Tap serial number again to
connect.
VuSitu will display the
Connected Instrument
screen when successfully
paired.
VuSitu's on-screen instructions will guide you through instrument calibration, live
readings, log setup and data sharing.

3
Option 2: Connect to Win-Situ on a PC via USBTROLLCom or Docking Station
Open Win-Situ. Select No
when asked Connect to
device now?
Choose Preferences >Com
Settings from menu bar.
Select Serial
Communications radio
button. Click check mark
button.
Click yellow connect button
at bottom right of screen.
Click Yes if prompted to
sync device time with local
system.
3Learn more.
Get complete instructions for your instrument and software in the product manual. Download it from www.in-situ.com.