
6. Remain the structural integrity of the NEW X1 as to ensure the safety and the utility of authorized maintenance.
Never reach inside of the NEW X1 while it is in operation.
5. Leave the machine do certain action automatically should protect the main board caused by reverse current.
1. Keep the NEW X1 in a clean, dust-free and dry environment that away from fire is essential for proper operation.
2. NEW X1 is designed to work properly at an ambient temperature of between 15°C (59°F) and 32°C (89.6°F) and humidity of between 20% and 50%;
Operating outside these limits may result in decreased print quality of your models.
3. NEW X1 generates high temperatures as the nozzle can reach up to 300°C (572°F) and the build plate up to 100°C (212°F) that can cause injury.
4. Avoiding vibrate the build plate and fan by improper operation as to prevent any damages.
C A U T I O N
Please read and understand the user manual carefully.
Failure to read the manual may lead to personal injury, or damage to the INFINITY3DP NEW X1.
This manual describes the application operation of the precision electronic machine.
-1-