Innokin iTaste MVP20W User manual

MVP20W 说明书 尺寸：56*96mm 封面材质：157g 双铜板纸单面过哑胶 内页材质：128g 双铜纸双面印刷 装订方式：胶装
USER MANUAL

ADVANCED VAPING SYSTEMS
Congratulaons on the purchase of this MVP20W – legendary for durability and
dependability the MVP20W now delivers more power than ever.
The MVP20W is the newest in the line of bestselling Innokin Technology iTaste MVP
vaporizers and features a wider range of Variable Voltage and Waage, advanced safety
features, a long lasng 2600mAh baery, ‘Vape while you charge’ technology and the
MVP20W can also be used to charge your mobile phone and other electronic devices.
First of all please check and verify that your MVP20W is an authenc Innokin Technology
product. To verify that this MVP20W is a real Innokin Technology device please:
1) Find the label on the reverse of the packaging and scratch the silver stripe to reveal your
MVP20W Unique Authorizaon number.
2) Visit the Official Innokin Technology website at hp://www.Innokin.com.
3) Enter the Unique Authencaon number in the Authencaon field.
4) Verify your MVP20W is authenc.
If you have any quesons or suggesons we would like to invite you to please write to us
at [email protected]. We are looking forward to hearing from you. Join our Innokin
FaceBook Page: www.facebook.com/Innokin.Technology for the latest informaon,
contests, giveaways and a great community!
1

4. This Advanced Personal Vaporizer has not been evaluated by the Food and Drug
Administraon and is not intended to treat, migate, prevent or cure any
disease or condion. This product is not intended for use as a smoking cessaon
device.
5. This product is intended for use with the charger provided with the unit. We
recommend you always use a high quality 5V 500mA USB wall charger (CE/UL
Cerfied). Use of unauthorized chargers may lead to overheang and possible
burning of items in contact with the unit. Innokin Technology is not responsible
for baery and charger explosions, fires or malfuncons due to the use of a
low-quality charger. This product does not come included with any wall charger.
6. This Advanced Personal Vaporizer does not come included with car charger or
car charger adapter. This device is not designed for use with a car charger. Use
of unauthorized chargers may lead to overheang and possible burning of items
in contact with the unit.
7. InnokinTechnology is not responsible for any clearomizer or baery damage due
to the use of low quality eLiquid or dry herb. The original MVP20W Advanced
Personal Vaporizer starter kit does not come included with clearomizer or
atomizer.
WARNING:
Please read this secon carefully to ensure you receive maximum benefits from
your MVP20W and enjoy vaping with it in the most safe and effecve ways
possible.
1. This Advanced Personal Vaporizer may be used with e-liquids that contain nicone.
Please check with your e-liquid provider. This product is only intended for use by
adults of legal smoking age (18+) and should not be used by children, women who
are pregnant or breaseeding, or persons with or at risk of heart disease, high blood
pressure, diabetes or taking medicine for depression or asthma, or who otherwise
may be sensive to nicone. Nicone is addicve and habit forming, and it is very
toxic by inhalaon, in contact with the skin or eyes, or if swallowed. Ingeson of the
non-vaporized concentrated e-liquid ingredients can be poisonous. Keep away from
children and pets.
2. This Advanced Personal Vaporizer may be used with e-liquids that contain nicone,
a chemical known to the State of California to cause birth defects or other reproduc-
ve harm.
Please check with your e-liquid provider. (For products sold in
California.)
32

8. All empty clearomizers must be disposed of properly and out the reach of
children and pets.
9. This Advanced Personal Vaporizer includes small parts such as the mouth piece.
Always keep any small parts out of reach of children and pets to prevent swallowing
or other harm.
10. Obey local laws or regulaons regarding Electronic Cigarees when vaping. If you
are in an area where there are any bans or potenal dangers, please do not use
your Advanced Personal Vaporizer.
11.
Do not misuse, mishandle or store your Advanced Personal Vaporizer improperly.
Even though it is made of high quality stainless steel it may become damaged when
dropped or otherwise mishandled.
12. Do not drop, throw, or mishandle your Advanced Personal Vaporizer as the
outer shell or inner components may become damaged. If the shell of the
device becomes damaged or the structural integrity of the baery becomes
compromised, disconnue use immediately and contact your Authorized
Innokin Technology Vendor.
13. In order to prolong the operaon of your Advanced Personal Vaporizer, please
do not place or store in excessively hot or cold environments.
14. Your Advanced Personal Vaporizer is not waterproof. Keep it dry at all mes.
Do not submerge this device or expose it to moisture.
15. Keep your Advanced Personal Vaporizer away from sources of excessive heat
or cold as damage may occur.
16. Do not aempt to repair the unit by yourself as damage or personal injury may
occur.
17. In order to guarantee the normal funconing of your Advanced Personal
Vaporizer, and maximize the pleasure of vaping, we strongly advise that you
charge the baery when the power level drops below 10 percent.
18. Do not leave the baery depleted for long periods of me between recharging
or the baery capacity may be decreased.
19. Do not leave this device unaended while charging.
20. If
the device becomes excessively hot, disconnue use immediately and contact
your Authorized Innokin Technology Vendor.
54

21. If the device will not power off, disconnue use immediately and contact your
Authorized Innokin Technology Vendor.
22. If the device funcons in a way which is not stated in the manual contact your
Authorized Innokin Technology Vendor.
23. As this device has an internal Lithium Ion Baery, the lifespan of the product
will be limited.
76
The Primary Features of The MVP20W
Variable Voltage:
Voltage can be adjusted from 3.3 – 7.5 volts in .1 volt increments.
Variable Waage:
Waage can be adjusted from 6.0 – 20.0 Was in .5 was increments.
Baery Level Indicator:
The MVP20W baery capacity is displayed via green, yellow and red LED.
Green = Almost fully Charged. When the MVP20W fully recharged the LED light
will power off.
Yellow = Half Power.
Red = Low Power. Charge the MVP20W.
The MVP20W has a built-in 2600 mAh polymer Li-Ion rechargeable baery.
Large baery capacity:
12
5
3
4
1 Connector
2. Firing , POWER ON ,
POWER OFF buon
3. “P” buon: VW
4. “U” buon: VV
5. Micro USB cable plug port

98
The integrated Puff counter will record the number of puffs you have taken. Either
press “ P ” buon or “ U ” buon for 1 second to check the number of puffs. The
Puff Counter will reset to 0 whenever the device is powered off.
Puff Counter:
Press the power buon “ ” three mes in rapid succession to turn on the
MVP20W. When the MVP20W is powered on Hold down the “ ” buon to
acvate the atomizer and vape. When the MVP20W is not in use, press the “ ”
buon three mes in succession to power off the MVP20W Advanced Personal
Vaporizer. Always power off the MVP20W Advanced Personal Vaporizer when it is
not being used, or when it is going to be stored in a pocket, bag or purse.
ON/OFF baery switch:
If the acvaon buon is held for longer than 10 seconds the MVP20W Advanced
Personal Vaporizer will stop firing unl the buon is released and pressed again.
The Red LED and Baery bar will connue blinking when the baery capacity is
lower than 3.3V and the MVP20W Advanced
Personal Vaporizer will power off
automacally.
The MVP20W Advanced Personal Vaporizer monitors the baery voltage and will
automacally power off when the baery is discharged.
Ohms meter:
Reads the resistance of your atomizer/cartomizer/clearomizer.
10 seconds Cutoff:
Low Voltage Warning
Over-Discharge Protecon:
Short Circuit/Atomizer Protecon protects the MVP20W Advanced Personal
Vaporizer against shorted atomizers and will stop the unit from funconing in
unsafe condions.
Short Circuit/Atomizer Protecon:
SAFETY:

1110
The MVP20W is recharged with a Micro USB cable. When plugged into a power
source the MVP20W can also be vaped and charged at the same me with Innokin
Technology’s ‘Vape while you charge’ pass-through technology.
‘Vape while charging’ Technology
When the MVP20W is turned off it will store the current voltage or waage seng
and it will retain the seng when the MVP20W is powered on.
Remembers last Voltage or Waage seng:
Digital display shows the Ohms meter, Voltage / Waage seng and the number
of Puffs taken since last me the baery was turned off.
Built-in 3 digit display:
To charge your portable electronic device with the MVP20W - set the small pin
switch on the boom of the MVP20W to the ON posion and connect a microUSB
cable to the USB OUTPUT port (DC 5V, maximum output current 0.5A).
To maximize the baery charge of your MVP20W please ensure that the boom
switch is set to the Off posion when you are not using the portable charger
funcon.
Portable power source for electronic products
The MVP20W has three buons: “ ” buon, "P" buon and "U" buon. All device
funcons are acvated using those three buons by themselves, or in easy to
remember combinaons, to change sengs in a single step without the use of a
menu system.
OPERATION GUIDE
“P” - Power buon: Variable Waage - VW
“U” - Voltage buon: Variable Voltage - VV

1312
Pressing the power buon “ ” three mes in rapid succession will power on the
MVP20W Advanced Personal Vaporizer. The main LED light will blink from Red to
Yellow to Green, aer which the MVP20W Advanced Personal Vaporizer will enter
standby mode. The final color of the LED will indicate the current power level.
When the MVP20W Advanced Personal Vaporizer has been powered on, Press and
Hold the “ ” buon to acvate the unit. The color of the LED when the buon is
pressed indicates the current power level.
Press and hold the “U” buon for 3 seconds to enter variable voltage mode. The
screen will show the Puff counter first followed by the current voltage or waage
seng then the MVP20W will enter variable voltage mode. Voltage can be
adjusted from 3.3 upwards to 7.5 volts in .1 volt increments by pressing the “U”
buon.
Press and hold the “P” buon for 3 seconds to enter variable waage mode. The
screen will show the Puff counter first followed by the current voltage or waage
seng then the MVP20W will enter variable waage mode. Waage can be
adjusted from 6.0 to 20 was in .5 wa increments by pressing the “P” buon.
Please note that the MVP20W will use either voltage or waage depending on the
last seng chosen. If voltage is chosen the MVP20W will be in Voltage mode and
if Waage has been chosen it will be in Waage mode.
To POWER ON the MVP20W:
Variable Voltage Mode :
Variable Waage Mode :
Hold both the “P” and “U” buons simultaneously for 2 seconds. The screen will
show a series of readings, the first being the resistance of the aached load ( Rx.x,
for example R2.2), the second being the baery voltage, the third being the
number of puffs since the device was last turned off and the fourth being the last
set voltage or waage. If no load is aached the screen with display “NON”.
Ohms Meter & Baery Level Indicator & Puff Counter:

1514
If you wish to check the number of puffs taken since the MVP20W was last turned
off, you can also hold either the “P” or the “U” buon to display the Puff Counter
which will be followed by the display of current mode (VV mode or VW mode). In
this state, you can also adjust the voltage or waage by pressing either the “P” or
“U” buon.
The main LED light will display green to indicate full
baery charge, yellow to indicate half capacity and
red to indicate immediate charging is required.
Baery Capacity Display
Press the “ ” buon three mes in succession to power off your MVP20W
Advanced Personal Vaporizer.
To POWER OFF the MVP20W:
The Red LED will remain lit for five seconds if a load short circuit is detected aer
which no vapor will be produced. Check the device carefully to determine the
cause of the short circuit. If the cause of the short circuit cannot be detected
please contact your authorized Innokin vendor for more informaon.
Short Circuit
The Red LED will connue blinking for eight seconds when baery capacity is
lower than 3.3V and the MVP20W Advanced Personal Vaporizer will automacally
power off.
Low Voltage Warning
To charge the MVP20W baery with the provided Micro USB cable use a high
quality wall socket adapter or a computer USB port.
OR

1716
PLEASE NOTE:
The Red LED will blink for eight seconds when the baery capacity is lower than
3.3V and the MVP20W will automacally power off. If a load short circuit is
detected the Red LED will stay lit for five seconds, aer which no vapor will be
produced. If the RED LED remains lit for more than five seconds, and your device
is within the 3 month warranty period, please contact your Authorized Innokin
Technology Vendor for warranty details.
When the MVP20W baery is fully charged the LED on the firing buon will light
green and power off.
The main MVP20W baery LED power light will blink from red to yellow to green,
aer which the MVP20W baery will enter standby mode. The final LED color will
indicate the current power level.
The main LED light will display green to indicate a full baery charge, yellow to
indicate power is at half capacity and red to indicate immediate charging is
required.
Red LED light = baery voltage is lower than 3.6V
Yellow LED light = baery voltage is around 3.6V-3.75V
Green LED light = baery voltage is higher than 3.75V

1918
WARRANTY INFORMATION
Innokin Technology provides a three month aer sales service warranty to all of
our authorized vendors.
Please consult your Authorized Innokin Technology Vendor for more informaon
and terms of service.
Innokin’s warranty does not apply to products purchased through third-party
vendors. To ensure you buy real Innokin products, and take advantage of our aer
sales service warranty, only buy from Authorized Innokin Technology Vendors.
Technical Specificaons:
Operang Voltage: 3.3V-7.5 V
Operang Waage: 6.0W-.20W
Standby current: 100uA max
Maximum output Waage: 20W
Maximum output Current: 6A
Maximum output Voltage: 7.5V
Clearomizer Resistance: 1.0 Ohm (minimum)
Baery: Built-in 2600 mAh polymer Li-Ion rechargeable baery.
Charging: Micro USB DC5V/1000mA
OUTPUT port: DC5V /1000mA