INNOLIVING INN-509 User manual

IT
VENTILATORE
DA TAVOLO CON CLIP
INN-509
MANUALE D’USO
USER MANUAL

2

3
IT
VENTILATORE DA TAVOLO CON CLIP
Grazie per aver acquistato il Ventilatore da tavolo Innoliving INN-509. Prima dell’uso,
leggere attentamente le seguenti istruzioni e conservare il presente manuale per future
consultazioni.
AVVERTENZE
• Gli elementi di imballaggio (sacchetti di plastica, cartone, polistirolo
ecc.) non devono essere lasciati alla portata dei bambini in quanto
potenziali fonti di pericolo e devono essere smaltiti secondo quanto
previsto dalle normative vigenti.
• Proteggere il prodotto dalle temperature estreme, dalla luce solare
diretta, da forti vibrazioni,dall’eccessiva umidità, dai liquidi, da gas,
vapori o solventi inammabili.
• Non sottoporre il prodotto ad alcuna sollecitazione meccanica.
• Maneggiare il prodotto con cautela. Urti, colpi o la caduta anche da
un’altezza minima potrebbero danneggiarlo.
• Questo prodotto può essere utilizzato da bambini di età superiore a
8 anni e persone con ridotte capacità siche, mentali o sensoriali, o
privi di esperienza e conoscenza solo se sotto supervisione o se hanno
ricevuto istruzioni riguardanti il l’uso in sicurezza dell’apparecchiatura e
comprendono i rischi associati al suo utilizzo.
• I bambini devono essere sorvegliati per assicurarsi che non giochino
con l’apparecchio.
• Questo prodotto non è un giocattolo. Tenerlo fuori dalla portata dei
bambini e degli animali domestici.
• Le operazioni di pulizia e manutenzione non devono essere eseguite
da bambini senza supervisione.
• Non toccare mai il prodotto con mani umide o bagnate.
• Le spine non devono mai essere collegate o scollegate con le mani
bagnate.
• Pericolo scossa elettrica! Non immergere l’apparecchio in acqua.

4
IT
• Non utilizzare il ventilatore in prossimità di una nestra aperta per
evitare un corto circuito a causa di gocciolamento o acqua piovana.
• Non utilizzare l’apparecchio se è danneggiato.
• Assicurarsi che non vi siano parti, come tessuti o capelli, in prossimità
dell’apparecchio che possano impigliarsi sulle pale del ventilatore,
quando è in funzione.
• Pericolo di lesioni! Mentre il prodotto è in funzione, non toccare per
nessun motivo le pale e non far toccare le pale da nessun oggetto.
• Non lasciare il prodotto incustodito quando è in funzione.
• Non coprire mai il prodotto quando è in funzione.
• La presa di corrente deve trovarsi vicino all’apparecchio e deve essere
facilmente accessibile.
• Non scollegare mai la spina dalla presa di corrente tirando il cavo,
scollegarla sempre e solo dalle apposite impugnature.
• Scollegare la spina dalla presa di corrente quando non viene utilizzata
per lunghi periodi.
• Per motivi di sicurezza, scollegare sempre la spina dalla presa in caso
di temporali.
• Assicurarsi che il cavo di alimentazione non venga schiacciato, piegato,
danneggiato da oggetti taglienti o esposto ad altre sollecitazioni
meccaniche. Evitare al cavo di alimentazione eccessivi carichi termici
da eccessivo calore o freddo estremo. Non modicare il cavo di
alimentazione. Se ciò non viene rispettato, il cavo di alimentazione può
subire danni. Un cavo danneggiato può causare una scossa elettrica
mortale.
• Se il cavo di alimentazione presenta danni, non toccarlo. Innanzitutto,
mettere fuori tensione la relativa presa di corrente (ad es. tramite il
rispettivo salvavita) e poi scollegare con attenzione la spina dalla presa.

5
IT
Non utilizzare mai il prodotto con il cavo di alimentazione danneggiato.
• Se il cavo o la spina è danneggiato, esso deve essere sostituito dal
costruttore o dal suo servizio assistenza tecnica o comunque da una
persona con qualica similare, in modo da prevenire ogni rischio.
• In caso di guasto o di cattivo funzionamento dell’apparecchio,
spegnerlo e non manometterlo.
Per l’eventuale riparazione rivolgersi esclusivamente ad un centro di
assistenza tecnica autorizzato.
ASSEMBLAGGIO
Rimuovere il materiale di imballaggio e collocare tutti i componenti
su una supercie piana e stabile. Inserire le pale sul ventilatore come
da immagini a lato, facendo attenzione che i perni sugli alloggiamenti
nel ventilatore coincidano perfettamente con i fori presenti nelle pale.
ATTENZIONE: VERIFICARE DI AVER INSERITO BENE LE
PALE NELLA TESTA DEL VENTILATORE E AVERLE FISSATE
FERMAMENTE, PRIMA DI FAR FUNZIONARE IL VENTILATORE.
MODALITÀ DI UTILIZZO:
Posizionare il ventilatore su una supercie piana e stabile o su altro ripiano utilizzando la clip sulla base,
accertandosi che l’apparecchio sia ssato adeguatamente al supporto. Per aggiustare l’inclinazione
del ventilatore, ruotare in senso anti-orario la rotella di rilascio a lato del prodotto, inclinare il corpo del
ventilatore manualmente e ssare la posizione, ruotando la rotella in senso inverso. Collegare il ventilatore
alla presa di corrente e premere l’interruttore. Per spegnere il prodotto premere l’interruttore e scollegare
dalla rete elettrica. Scollegare il prodotto dalla rete elettrica quando non in uso e ogni qualvolta si debba
eettuare un’attività di pulizia e manutenzione.
PULIZIA E MANUTENZIONE
Scollegare il cavo di alimentazione prima di procedere con qualsiasi operazione di pulizia e manutenzione.
Non immergere mai il prodotto in acqua. Pulire l’esterno dell’apparecchio con un panno umido e asciugare con
un panno morbido. Non usare mai solventi o abrasivi. Non pulire mai i componenti dell’apparecchio con liquidi
inammabili. I vapori potrebbero causare incendi o esplosioni.

6
IT
Descrizione
Simbolo Valore Unità
Portata massima aria F 27.30 m3/min
Potenza assorbita dal ventilatore P 5.3 W
Valori di esercizio SV 5.15 (m3/min)/W
Consumo elettrico in modo“attesa” PSB 0 W
Consumo elettrico stagionale Q 1.696 kWh/a
Livello di potenza sonora del ventilatore LWA 42.7 dB(A)
Velocità massima dell’aria C 5008.2 metri/min
Norma di misura IEC 60879:1986+corr.1992
Referente Innoliving Spa Via Merloni, 9 60131 Ancona
SPECIFICHE TECNICHE
Questo prodotto è conforme a tutte le
direttive europee applicabili.
Leggere attentamente le istruzioni per l’uso
INFORMAZIONI AGLI UTENTI ai sensi del Decreto Legislativo N° 49 del 14 Marzo 2014“Attuazione
della Direttiva 2012/19/UE sui riuti di apparecchiature elettriche ed elettroniche (RAEE)”. Il
simbolo del cassonetto barrato riportato sull’apparecchiatura indica che il prodotto alla ne
della propria vita utile deve essere raccolto separatamente dagli altri riuti.
L’utente dovrà, pertanto, conferire l’apparecchiatura integra dei componenti essenziali giunta a ne vita
agli idonei centri di raccolta dierenziata dei riuti elettronici ed elettrotecnici, oppure riconsegnarla
al rivenditore al momento dell’acquisto di nuova apparecchiatura di tipo equivalente, in ragione di uno
a uno, oppure 1 a zero per le apparecchiature aventi lato maggiore inferiore a 25 CM. L’adeguata raccolta
dierenziata per l’avvio successivo dell’apparecchiatura dimessa al riciclaggio, al trattamento e allo
smaltimento ambientale compatibile contribuisce ad evitare possibili eetti negativi sull’ambiente e sulla
salute e favorisce il riciclo dei materiali di cui è composta l’apparecchiatura. Lo smaltimento abusivo del
prodotto da parte dell’utente comporta l’applicazione delle sanzioni amministrative di cui al D.Lgs n. Decreto
Legislativo N° 49 del 14 Marzo 2014.
ETICHETTA DATI:
Apparecchio con isolamento elettrico di
classe II
INN-509
VENTILATORE DA TAVOLO -
TABLE FAN
220-240V~50Hz 7W
Innoliving Spa
Via Merloni 9 - 60131 Ancona - Italy
Lot n.
MADE IN CHINA

7
GB
TABLE FAN WITH CLIP
Thank you for purchasing Innoliving table fan INN-509. Before use, read the instruction
manual carefully and keep this manual safe for future references
WARNINGS
• Keep all packaging material (plastic bags, cardboard. Polystyrene,
etc.) out of reach of children since they are potential sources of
danger and must be disposed as provided by law.
• Protect the product from extreme temperatures, direct sunlight,
strong vibrations, excessive moisture, liquids, gases, vapours or
ammable solvents.
• Do not subject the product to mechanical stress.
• Handle the product with caution. Bumps, shocks or a fall from a
minimum height could damage it.
• This product can be used by children older than 8 years old and
persons with reduced physical, mental or sensory capacity, or lack
of experience and knowledge only if under supervision or if they
received appropriate instructions regarding the safe use of the
equipment and have fully learned the associated risks.
• Children should be supervised to ensure they do not play with the
appliance.
•This product is not a toy. Keep this product out of reach of children
and pets.
• Cleaning and maintenance operation should not be carried out by
children without supervision.
• Do not touch the product if your hands are wet.
• The plugs must never be connected or disconnected with wet
hands.
• Danger of electric shock! Do not immerse the appliance in water.
• Do not use the fan near an open window to avoid a short circuit

8
IT
due to dripping or rainwater.
• Do not use the appliance if it is damaged.
• Make sure that there are no parts, such as fabrics or hair, near the
appliancethatcangetcaughtonthefanblades when it isoperating.
• Danger of injury! While the product is operating, do not insert
objects through the slots in the grids.
• Do not leave the product unattended when it is operating.
• Never cover the product when it is operating.
• The plug must be near the unit and must be easily accessible.
• Never disconnect the product from the USB port by pulling the
cable, always unplug it by pulling the connector.
• Disconnect the plug from the mains when the products is not used
for a long period.
• For safety reasons, always unplug the connector from the USB
port in the event of a lightning storm.
• Make sure that the power cord is not crushed, bent, damaged
by sharp objects or exposed to other mechanical stresses. Avoid
excessive thermal loads due to excessive heat or extreme cold. Do
not modify the power cord. A damaged cord can cause a deadly
electric shock. Never use the product with a damaged power cord.
• If the power cord is damaged, do not touch it. Switch o the
power socket (using the respective circuit breaker) and carefully
disconnect the plug from the socket. Never use the product if the
power cord is damaged.
• If the cord or plug is damaged, it must be replaced by the
manufacturer or its technical assistance service or by a qualied
person, in order to prevent any risk.
• In case of failure or malfunction of the appliance, switch it o and

9
IT
do not tamper with it. For any repairs, contact only an authorized
technical assistance center.
ASSEMBLY
Remove the packing material and place all components on a at
and stable surface. Insert the blades on the fan as shown
on the pictures, making sure that the hook
on the fan correspond to the holes on the blades.
WARNING: MAKE SURE TO INSERT THE BLADES INTO THE
ELECTRIC FAN PROPERLY AND TO BLOCK THEM FIRMLY,
BEFORE USING THE ELECTRIC FAN.
HOW TO USE:
Place the fan a at and stable surface or on another surface using the clip on the base. Make sure the
appliance is properly secured to the stand.To adjust the inclination of the fan, turn the release wheel on the
side of the product counterclockwise, tilt the fan body manually and x the position by turning the wheel in
the opposite direction. Connect the fan to the power outlet and press the switch. To switch o the product,
press the switch and disconnect from the mains. Disconnect the product from the mains when not in use and
before proceed with any cleaning and maintenance operation.
CLEANING AND MAINTENANCE
Unplug the power cord before proceed with any cleaning or maintenance operation. Never immerse the
product in water. Clean the outer part of the product with a damp cloth and dry it with a soft cloth. Never
use solvents or abrasives to clean the product. Do not clean the components with ammable liquids.Vapours
may cause res or explosions.
Description
Symbol Value Unit
Maximum air ow F 27.30 m3/min
Power absorbed by the fan P 5.3 W
Operating value SV 5.15 (m3/min)/W
Electrical consumption in“waiting”mode PSB 0 W
Seasonal electricity consumption Q 1.696 kWh/a
Sound power level of the fan LWA 42.7 dB(A)
Maximum air speed C 5008.2 meter/minute
Measurement standard IEC 60879:1986+corr.1992
Contant Innoliving Spa Via Merloni, 9 60131 Ancona
TECHNICAL SPECIFICATIONS

10
GB
This product complies with all the applicable
EU Directives.
Read carefully the instruction manual before
use.
INFORMATION TO USERS according to Legislative Decree No. 49 of March 14, 2014 “ 2012/19/
UE Implementation of the Directive on Waste Electrical and Electronic Equipment (WEEE)“ The
crossed-out dustbin symbol indicates that the product at the end of its life must be collected
separately from other waste.
The user should, therefore, take the equipment with the essential components at the end of its useful
life to the separate collection center of electronic and electrical waste, or return it to the retailer when
purchasing new equipment of equivalent type, in ratio of one to one, or one to zero for devices with larger
side less than 25 CM. The separate collection for the decommissioned equipment for recycling, treatment
and environmentally compatible disposal contributes to avoid possible negative eects on the environment
and human health and promotes recycling of the materials. Improper disposal of the product by the user
entails the application of administrative sanctions according to Legislative Decree No. 49 of 14 March 2014.
RATING LABEL:
Class II insulation.
INN-509
VENTILATORE DA TAVOLO -
TABLE FAN
220-240V~50Hz 7W
Innoliving Spa
Via Merloni 9 - 60131 Ancona - Italy
Lot n.
MADE IN CHINA

11
GB

Innoliving Spa
Via Merloni, 9
60131 Ancona Italy
Tel 071 2133550
www.innoliving.it
MADE IN CHINA
Rev.01_03.2019
Table of contents
Languages:
Other INNOLIVING Fan manuals

INNOLIVING
INNOLIVING INN-503 User manual

INNOLIVING
INNOLIVING INN-503 User manual

INNOLIVING
INNOLIVING INN-522 User manual

INNOLIVING
INNOLIVING INN-512 User manual

INNOLIVING
INNOLIVING INN-501 User manual

INNOLIVING
INNOLIVING INN-505 User manual

INNOLIVING
INNOLIVING INN-513 User manual

INNOLIVING
INNOLIVING INN-510 User manual

INNOLIVING
INNOLIVING INN-753 User manual

INNOLIVING
INNOLIVING INN-502 User manual