
9
GB
power socket (using the respective circuit breaker) and carefully
disconnect the plug from the socket. Never use the product if the
power cord is damaged.
• If the cord or plug is damaged, it must be replaced by the
manufacturer or its technical assistance service or by a qualied
person, in order to prevent any risk.
• In case of failure or malfunction of the appliance, switch it
o and do not tamper with it. For any repairs, contact only an
authorized technical assistance center.
ASSEMBLY
Remove the packing material and place all components on a at
and stable surface. Insert the blades into the head of the fan, as shown
in the pictures, making sure that the hooks on fan correspond to the holes
on the blades.
WARNING: MAKE SURE TO INSERT THE BLADES INTO THE
ELECTRIC FAN PROPERLY AND TO BLOCK THEM FIRMLY,
BEFORE USING THE ELECTRIC FAN.
HOW TO USE
Place the ventilator on a at and stable surface or on another surface using the clip on the base.To adjust
the inclination of the fan, turn the wheel on the side of the product clockwise, tilt the fan body manually
and x the position, turn the wheel in the opposite direction.
Connect the fan to the power outlet and press the switch.To switch o the product, press the switch and
disconnect from the mains. Disconnect the product from the mains when not in use and before proceed
with any cleaning and maintenance operation.
CLEANING AND MAINTENANCE
Unplug the power cord before proceed with any cleaning or maintenance operation. Never immerse the
product in water. Clean the outer part of the product with a damp cloth and dry it with a soft cloth. Never
use solvents or abrasives to clean the product. Do not clean the components with ammable liquids.
Vapours may cause res or explosions.