Innova Filomuro SWI 400 User manual

EN
Installation Manual
(Translation of original
instructions)
SWI 400 - SWI 600 - SWI 800
N420310B - Rev. 00 - 05/2023
Filomuro
built-in

2
Markings
Conformity
This unit complies with the European directives:
• Low voltage 2014/35 / EU;
• Electromagnetic compatibility 2014/30 / EU;
First of all, we would like to thank you for having chosen a device of our production.
We are sure you will be happy with it because it represents the state of the art in the technology
of home air conditioning.
By following the suggestions contained in this manual, the product you have purchased will
operate without problems giving you optimum room temperatures with minimum energy costs.
INNOVA S.r.l.

3
TABLE OF CONTENTS
1 Coding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.7
1.1 Product related coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.7
2 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.9
2.1 About the manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.9
2.1.1 Editorial pictograms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.9
2.1.2 Pictograms on the product. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.9
2.1.3 Recipients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.9
2.1.4 Manual organisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.9
2.2 General warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.10
2.3 Basic rules of security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.10
2.4 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.11
3 Product presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.12
3.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.12
3.2 Destination of use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.12
3.3 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.12
3.4 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.13
3.5 Compatible accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.14
4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.16
4.1 Preliminary warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.16
4.2 Reception. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.16
4.2.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.16
4.2.2 Package description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.16
4.3 Dimensions and weights with packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.16
4.4 Handling with packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.17
4.4.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.17
4.4.2 Movement methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.17
4.5 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.17
4.5.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.17
4.6 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.17
4.6.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.17
4.6.2 Remove the package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p.18
4.7 Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.18
4.7.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.18
4.8 Installation mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.18
4.9 Installation minimum distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.19
4.10 Installation arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.19
4.11 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.19
4.11.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.19
4.11.2 Predisposition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p.20
4.11.3 Device preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.20

4
4.12 Hydraulic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.22
4.12.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.22
4.12.2 Position and dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.22
4.12.3 Connection to the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p.22
4.12.4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.22
4.13 Condensation drain preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.23
4.13.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.23
4.13.2 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.23
4.13.3 Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.24
4.14 Filling the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.24
4.14.1 Mounting the thermostatic head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.24
4.15 Electric connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.25
4.15.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.25
Power line dimensioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.25
4.15.2 Access to the terminal block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.25
Electrical connection and settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.26
6 M7 series control Code EEB749 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.27
6.1 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.27
6.2 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.27
6.2.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.27
6.2.2 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.27
6.3 Single connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.29
6.4 Multiple connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.30
6.5 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.31
6.5.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.31
6.5.2 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p.31
6.5.3 Presence contact CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.31
6.5.4 RS485 Serial Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.32
6.6 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.32
6.6.1 Basic menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.32
6.6.2 Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.32
6.6.3 Pairing of control and unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.33
6.6.4 Error signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.35
6.6.5 Alarm display on wall control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.35
7 M7 series control Code EGB749. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.36
7.1 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.36
7.2 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.36
7.2.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.36
7.2.2 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.36
7.3 Single connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.38
7.4 Multiple connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.39
7.5 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.39
7.5.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.39
7.5.2 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p.40
7.5.3 Presence contact CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.40
7.5.4 Bluetooth connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.40
7.6 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.41

5
7.6.1 Basic menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.41
7.6.2 Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.41
7.6.3 Pairing of control and unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.43
7.6.4 Error signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.44
7.6.5 Visualization of alarms on display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.44
8 Remote control EEA649 - EEB649 / EFA649 - EFB649. . . . . . . . . . . . . . . . . . . . . . . . . . . . p.45
8.1 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.45
8.2 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.45
8.2.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.45
8.2.2 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.45
8.3 Single connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.47
8.4 Multiple connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.48
8.5 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.48
8.5.1 Preliminary warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.48
8.5.2 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p.49
8.5.3 Presence contact CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.49
8.5.4 RS485 Serial Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.49
8.6 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.50
8.6.1 Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.50
8.6.2 Long period shut-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.51
8.6.3 Error signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.52
8.6.4 LED signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.52
9 Fixed speed remote controls Code B3V151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.53
9.1 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.53
9.2 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.53
9.3 Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.54
9.4 Connection diagram with seasonal switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.55
9.5 Generic thermostat connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.56
9.6 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.57
9.6.1 Connection with 3 speed thermostats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.57
9.6.2 Water probe management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.57
9.7 Error signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.57
10 0-10 V connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.58
10.1 Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.58
10.2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.59
10.3 Error signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.59
11 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.60
11.1 Preliminary warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.60
11.2 Routine maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.60
11.2.1 External cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.60
11.2.2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.60
11.3 Suggestions for energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.61
12 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.62
12.1 Preliminary warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.62

6
12.2 Troubleshooting table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.62
13 Configuration accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.63
13.1 Shut-off valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.63
13.1.1 Connection with 2-way manual valve (I20686) . . . . . . . . . . . . . . . . . . . . . . . . .p.63
13.1.2 Connection with 2-way valve and thermoelectric actuator (V20687) . . . . . . . . . . . . . . . . p.63
13.1.3 Connection with 3-way diverting valve unit with thermoelectric actuator (V30688) . . . . . . . . . . p.64
14 Technical information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.65
14.1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.65
14.2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.66
14.2.1 Metal casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.66
14.2.2 Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.67
14.2.3 Aesthetic front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p.67

7
CODING
CODING
1.1 Product related coding
This instruction manual refers to the following product
codes.
 Check the correspondence with the technical rat-
       -
tion" p.12.
Filomuro built-in
FAWI04D01II0B00 SWI 400 Right-handed ttings For connection with M7 series Bluetooth remote
controls (modulating speed)
FAWI04D01II0P00 SWI 400 Right-handed ttings For connection with Smart Touch series remote
controls (modulating speed).
FAWI04D01II0R00 SWI 400 Right-handed ttings For connection with M7 series remote controls
(modulating speed)
FAWI04D01II0T00 SWI 400 Right-handed ttings For connection with remote control (xed speed)
FAWI04D01II0V00 SWI 400 Right-handed ttings For 0-10 V connection (modulating speed)
FAWI04S01II0B00 SWI 400 Left-handed attacks For connection with M7 series Bluetooth remote
controls (modulating speed)
FAWI04S01II0P00 SWI 400 Left-handed attacks For connection with Smart Touch series remote
controls (modulating speed).
FAWI04S01II0R00 SWI 400 Left-handed attacks For connection with M7 series remote controls
(modulating speed)
FAWI04S01II0T00 SWI 400 Left-handed attacks For connection with remote control (xed speed)
FAWI04S01II0V00 SWI 400 Left-handed attacks For 0-10 V connection (modulating speed)
FAWI06D01II0B00 SWI 600 Right-handed ttings For connection with M7 series Bluetooth remote
controls (modulating speed)
FAWI06D01II0P00 SWI 600 Right-handed ttings For connection with Smart Touch series remote
controls (modulating speed).
FAWI06D01II0R00 SWI 600 Right-handed ttings For connection with M7 series remote controls
(modulating speed)
FAWI06D01II0T00 SWI 600 Right-handed ttings For connection with remote control (xed speed)
FAWI06D01II0V00 SWI 600 Right-handed ttings For 0-10 V connection (modulating speed)
FAWI06S01II0B00 SWI 600 Left-handed attacks For connection with M7 series Bluetooth remote
controls (modulating speed)
FAWI06S01II0P00 SWI 600 Left-handed attacks For connection with Smart Touch series remote
controls (modulating speed).
FAWI06S01II0R00 SWI 600 Left-handed attacks For connection with M7 series remote controls
(modulating speed)
FAWI06S01II0T00 SWI 600 Left-handed attacks For connection with remote control (xed speed)
FAWI06S01II0V00 SWI 600 Left-handed attacks For 0-10 V connection (modulating speed)
FAWI08D01II0B00 SWI 800 Right-handed ttings For connection with M7 series Bluetooth remote
controls (modulating speed)
FAWI08D01II0P00 SWI 800 Right-handed ttings For connection with Smart Touch series remote
controls (modulating speed).
FAWI08D01II0R00 SWI 800 Right-handed ttings For connection with M7 series remote controls
(modulating speed)
FAWI08D01II0T00 SWI 800 Right-handed ttings For connection with remote control (xed speed)
FAWI08D01II0V00 SWI 800 Right-handed ttings For 0-10 V connection (modulating speed)
FAWI08S01II0B00 SWI 800 Left-handed attacks For connection with M7 series Bluetooth remote
controls (modulating speed)

8
CODING
Filomuro built-in
FAWI08S01II0P00 SWI 800 Left-handed attacks For connection with Smart Touch series remote
controls (modulating speed).
FAWI08S01II0R00 SWI 800 Left-handed attacks For connection with M7 series remote controls
(modulating speed)
FAWI08S01II0T00 SWI 800 Left-handed attacks For connection with remote control (xed speed)
FAWI08S01II0V00 SWI 800 Left-handed attacks For 0-10 V connection (modulating speed)

9
GENERAL INFORMATION
GENERAL INFORMATION
2.1 About the manual
This manual was written to provide all the explanations for
the correct management of the appliance.
 This instruction manual forms an integral part of the
device and therefore must be carefully preserved and
must ALWAYS travel with it, even if you transfer the de-
vice to another owner or relocate it to other premises.
If the manual gets damaged or lost, download a copy
from the website.
 Read this manual carefully before proceeding with any
operation and follow the instructions in the individual
chapters.
 The manufacturer is not responsible for damages to
persons or property caused by failure to follow the in-
structions in this manual.
 This document is restricted in use to the terms of the
law and may not be copied or transferred to third par-
ties without the express authorization of the manufac-
turer.
2.1.1 Editorial pictograms
The pictograms in the next chapter provide the necessary
information for correct, safe use of the machine in a rapid,
unmistakable way.
Related to security
 High risk warning (bold text)
• The operation described above presents a risk of se-
rious physical injury, fatality, major damage to the ap-
pliance and/or to the environment if not carried out
in compliance with safety regulations.
 Low risk warning (plain text)
• The operation described above presents a risk of mi-
nor physical injury or minor damage to the appliance
and/or to the environment if not carried out in com-
pliance with safety regulations.
 Prohibition (plain text)
• Refers to prohibited actions.
 Important information (bold text)
• This indicates important information that must be
taken into account during the operations.
In the texts
– procedures
• lists
In the control panels
– actions required
Expected responses following an action.
Inthegures
1 The numbers indicate the individual components.
A The capital letters indicate component assemblies.
1The white numbers in black marks indicate a se-
ries of actions to be carried out in sequence.
A 

2.1.2 Pictograms on the product
Symbols are used in some parts of the appliance:
Related to security
Caution: electrical danger
• The concerned personnel is informed to the pres-

shock.
2.1.3 Recipients
User
Non-expert person capable of operating the product in
safe conditions for people, for the product itself and the
environment, interpreting an elementary diagnostic of
faults and abnormal operating conditions, carrying out
simple adjustment, checking and maintenance operations.
Installer
   -
lically, electrically, etc.) the unit to the plant; this person is
responsible for handling and correct installation according
to the instructions provided in this manual and the national
standards currently in force.
Technical Service Centre
       
manufacturer to carry out all routine and supplementa-
ry maintenance operations, as well as every adjustment,
check, repair and replacement of parts necessary during
the life of the unit itself.
2.1.4 Manual organisation
The manual is divided into sections each dedicated to one
or more target groups.
Coding
It addresses all recipients.
It contains the list of products and/or accessories referred
to in the manual.
General information
It addresses all recipients.
It contains general information and important warnings
that should be known before installing and using the ap-
pliance.
Product presentation
It addresses all recipients.

10
GENERAL INFORMATION
It contains the information to identify the product, its com-
ponents, compatible accessories and destination of use.
Installation
It is addressed exclusively to the installer.
 -
essary for positioning, mounting and connecting the ap-
pliance.
Commissioning, maintenance and troubleshooting
They are addressed exclusively to the Technical Assistance
Centre.
       
most common commissioning and routine maintenance.
Conguration accessories
It is addressed to the installer and the Technical Assistance
Centre.
       

Technical information
It addresses all recipients.
It contains detailed technical information about the appli-
ance.
2.2 General warnings
 After unpacking, make sure that all the components are
present. If not, contact your vendor who sold the device
to you.
       
install the device. After having completed installation,
the installer will issue a declaration of conformity to the
plant manager, as required by the applicable standards
and the guidelines provided by contractor's instruction
manual supplied with the device.
 These device have been designed for room heating
and/or air conditioning and must be used as intended
and compatibility with their performance levels. Any
contractual and extra-contractual liability of construc-
tor for harm caused to person, animals or property by
installation errors, improper adjustments, maintenance
or use is excluded.
 If water leaks out of the device, set the main switch to
        
Customer Service as soon as possible or professional-

problem.
 If the device is to remain out of service for a prolonged
period, make sure you carry out the following opera-
tion:
– 
– close the water taps
– if there is a danger of frost, make sure that you have
added anti-freeze liquid into the circuits, or drain out
the system otherwise
 A temperature that is too low or too high is harmful to
health and is an unnecessary waste of energy. Avoid di-

 Avoid keeping the installation premises closed for a
long time except in the presence of a heat recovery
ventilation system.
 This instruction manual forms an integral part of the
device and therefore must be carefully preserved and
must ALWAYS travel with it, even if you transfer the de-
vice to another owner or relocate it to other premises.
If the manual gets damaged or lost, download a copy
from the website.
 All repair or maintenance interventions must be per-
formed by the technical service department or by pro-
-
let. Do not modify or intervene on the appliance as this
could create dangerous situations and the manufactur-
er will not be responsible for any damage caused.
 Avoid contact: danger of burns.
2.3 Basic rules of security
Please keep in mind that the use of products powered by
electricity and water call for operators to comply with cer-
tain essential safety rules:
 The use of the appliance to children and unassisted dis-
abled persons is prohibited.
 It is forbidden to touch the device with wet or damp
body parts.
 It is forbidden to carry out any operation before discon-
necting the appliance from the power supply by setting

 It is forbidden to modify the safety or adjustment de-
vices or adjust without authorization and indications of
the manufacturer.
 It is forbidden to pull, unplug or twist the device's elec-
tric cables, even if it is disconnected from the mains.
 It is forbidden to introduce objects and substances
through the air inlet and outlet grilles.
 It is forbidden to open the access doors of the device's


 It is forbidden to dispose of, or leave in the reach of
children, the packaging materials which could become
a source of danger.

11
GENERAL INFORMATION
2.4 Disposal
The symbol on the product or its packaging indicates that
the product must not be treated as normal household
waste, but must be taken to the appropriate collection
point for the recycling of electrical and electronic equip-
ment.
Proper disposal of this product avoids harm to humans
and the environment and promotes the reuse of valuable
raw materials.
For more detailed information about the recycling of this
       
waste disposal service or the shop where you purchased
the product.
Illegal disposal of the product by the user involves the ap-
plication of the administrative sanctions provided for by the
regulations in force.
This provision is only valid in the EU Member States.
 Avoid disassembling the unit yourself.
       -
ered by the Kyoto Protocol. Maintenance and disposal

only.
 Contact an authorised Technical Assistance Cen-
tre to disassemble the appliance.

12
PRODUCT PRESENTATION
PRODUCT PRESENTATION
3.1 Identication

Technical rating plate
        
         
product by its serial number and therefore invalidates
the warranty.
1. Technical rating plate
1
3.2 Destination of use
These appliances have been designed for conditioning
and/or heating rooms and they must be destined solely for
this purpose, in accordance with their performance char-
acteristics.
3.3 Description of the appliance
Filomuro incasso SWI fancoils range are designed for wall
mounting.
        
levels and size:
• SWI 400
• SWI 600
• SWI 800
All sizes are suitable for installation on two-pipe systems.
Filomuro incasso SWI

• 0R00 - for connection with M7 series remote controls
(modulating speed)
• 0B00 - for connection with M7 series Bluetooth re-
mote controls (modulating speed)
• 0P00 - for connection with Smart Touch series remote
controls (modulating speed)
• 0T00       
speeds)
• 0V00 - for connection 0-10 V (modulating speed)

13
PRODUCT PRESENTATION
3.4 Components
1. Formwork (accessory supplied separately)
2. Condensation drain tray
3. Condensate drain
4. 
5. Aesthetic wall panel (accessory supplied separately)
6. Electrical box
7. Heat exchanger
1
6
7
2
4
5
3
 The formwork and aesthetic wall panel are accessories
supplied separately.
 For the accessories formwork and aesthetic wall panel

kit itself.

14
PRODUCT PRESENTATION
3.5 Compatible accessories
Accessory description Combinable products Code
Wall-mounted control panels M7 series
Control panels
LED electronic control panel with touch interface, wall-mounted complete with thermo-
stat and room temperature and relative humidity probe. Cable connection. Colour white All EEB749II
LED electronic control panel with touch interface, wall-mounted complete with thermo-
stat and room temperature and relative humidity probe with integrated WiFi module,
InnovAPP. Cable connection. Colour white
All EFB749II
LED electronic control panel with touch interface, wall-mounted complete with thermo-
stat and room temperature and relative humidity probe. Bluetooth connection. Colour
white
All EGB749II
Wall mounted controls smart touch series
Control panels
SMART TOUCH wall mounted control panel with thermostat and room temperature and
relative humidity probe. Colour black All EEA649II
SMART TOUCH wall mounted control panel with thermostat and room temperature and
relative humidity probe. Colour white All EEB649II
SMART TOUCH wall mounted control panel with thermostat and room temperature and
relative humidity probe with integrated WiFi module, InnovAPP. Colour black All EFA649II (1)
SMART TOUCH wall mounted control panel with thermostat and room temperature and
relative humidity probe with integrated WiFi module, InnovAPP. Colour white All EFB649II (1)
WALL MOUNTED STANDARD FANCOIL CONTROLS
Control panels
Wall mounted control with thermostat, summer/winter and speed selectors All B3V151II
Network controls
Butler
BUTLER: codes, accessories and price list in relevant section All
Reversal attacks
(motor connection cable for LEFT hydraulic connections
Hydraulic connection reversal kit All BB0646II (2)
1. The control panel is connected to the device via cable. The WiFi antenna allows remote management via app.
2. Accessories can be installed and tested at the factory
3. Recommended side pipes entry (not from below or behind)

15
PRODUCT PRESENTATION
Accessory description Combinable products Code
Pre-installation accessories
Metal casing
Galvanised sheet metal formwork for ush wall installation dimensions (lxhxp):
934x344x125 mm. Complete with self-adhesive plaster-holding mesh and front support
panel.
SWI 400 L01045II (3)
Galvanised sheet metal formwork for ush wall installation dimensions (lxhxp):
1134x344x125 mm. Complete with self-adhesive plaster-holding mesh and front support
panel.
SWI 600 L01046II (3)
Galvanised sheet metal formwork for ush wall installation dimensions (lxhxp):
1334x344x125 mm. Complete with self-adhesive plaster-holding mesh and front support
panel.
SWI 800 L01047II (3)
Installation accessories
AESTHETIC PANEL VERTICAL INSTALLATION
Fully aligned with the wall aesthetic panel, dimensions (wxhxd): 905x336x30 mm SWI 400 LC1092II
Vertical ush aesthetic panel dimensions (lxhxp):1105x336x30 mm SWI 600 LC1093II
Vertical ush aesthetic panel dimensions (lxhxp): 1305x336x30 mm SWI 800 LC1094II
Hydraulic kit
HYDRAULIC KIT
Couple of EUROKONUS adapters for 1/2” female connection (male ttings) All AI0200II
Couple of EUROKONUS adapters for 3/4” female connection (male ttings All AI0201II
90° bended EUROKONUS connector All AI0203II
Distancer kit ( 1 piece) All AI0501II
Adaptors for at ring All AI0612II
2 way valve group with manual closure All I20686II (2)
2 way valve group (water inlet valve, shut o valve and electro thermal motor) All V20687II (2)
3 way valve group (with inlet 3 way valve, shut o valve, and electro thermal motor All V30688II (2)
1. The control panel is connected to the device via cable. The WiFi antenna allows remote management via app.
2. Accessories can be installed and tested at the factory
3. Recommended side pipes entry (not from below or behind)

16
INSTALLATION
INSTALLATION
4.1 Preliminary warnings
 This section is dedicated to the Installer. The fea-
tures of the installer are described in the "Recipi-
ents" p.9chapter
 For detailed information on the products, refer to
chapter "Technical information" p.65
 The installation must be carried out by the installer.

the installation is not performed correctly.
 During the installation, it is necessary to observe the
precautions mentioned in this manual, and on the la-
bels placed inside the equipment, as well as to adopt
any precaution suggested by common sense and by the
Safety Regulations in force in the place of installation.
         
parts. Use of other parts may cause the unit to come to

 Failure to apply the indicated rules may cause malfunc-
tions of the appliances and relieves the manufacturer
from any warranty and from any damage caused to per-
sons, animals or property.
4.2 Reception
4.2.1 Preliminary warnings
 Upon receipt of the package check that it is not dam-
aged, otherwise accept the goods with reserve, produc-
ing photographic evidence of any damage.
 In the event of damage, notify the shipper within 3 days
of receipt of any damage by registered mail with return
receipt, submitting photographic evidence. Similar in-
formation should be sent by fax to the manufacturer
(jurisdiction will be at the Court Trento for any dispute).
 No notice of damage will be accepted after 3 days from
delivery.
 Unpack and check the contents against the packing list.
4.2.2 Package description
The packaging is made of suitable material and carried out
by experienced personnel.
All units are checked and tested and are delivered com-
plete and in perfect conditions.
The appliance is shipped in standard packaging consisting
of a cardboard sleeve and a set of expanded polystyrene
protectors.
4.3 Dimensions and weights with packaging
L
P
H

17
INSTALLATION
Filomuro built-in
Models m.u. 400 600 800
Total widh mm 920 1120 1320
Total height mm 450 450 450
Total depth mm 213 213 213
Weight kg 15,0 17,0 20,0
4.4 Handling with packaging
4.4.1 Preliminary warnings
   -
sonnel, adequately equipped and with equipment suit-
able for the weight and dimensions of the appliance.
 Stay clear of the area below and around it when the

 Avoid dangerous situations when using a hoist to lift
the appliance.
 During transportation, the unit must be kept in vertical
position.
4.4.2 Movement methods
Boxes can either be carried singularly by hand by two oper-
ators or loaded on a forklift truck even stacked.
 Check the indications on the packaging for the number
of stackable packages.
 In manual operation it is compulsory to respect always
the maximum weight per person provided for by the
national laws and standards.
 Use the handles provided on the packaging.
A Handles
A
A
4.5 Storage
4.5.1 Preliminary warnings
 Stored in accordance with the applicable national reg-
ulations.
 Store the box in a closed environment protected from

planks or pallets.
 Do not turn the packaging upside down.
 Only place the appliance in a vertical position.
 Store in a clean and dry place.
4.6 Unpacking
4.6.1 Preliminary warnings
 Unpack and check the contents against the packing list.
 Check that no components were damaged during
transport.
 Dispose of the packaging components following the ap-
plicable waste disposal regulations. Check for disposal
arrangements with your municipality.
 Handle with care.
 The equipment must always be handled vertically.
 The packing material (cardboard, staples, plastic bags,
etc.) must not be dispersed or abandoned in the sur-
rounding environment and must be kept out of chil-
dren reach, as it can be dangerous.

18
INSTALLATION
4.6.2 Remove the package
1. Polystyrene elements
1
Remove the packing:
– open the cardboard packaging
– remove the polystyrene elements
– remove the accompanying components
– remove the appliance from the box
Accompanying material
They are included with the appliance, inside the packaging:
 Check the presence of the individual components.
• 
• 1 condensate collection tray
• 
• 1 installation manual
• 1 user manual
4.7 Installation site
Position of device must be established by the system de-
  
account both technical requirements and any local laws in
force.
The Filomuro incasso SWI fancoil has to be installed
only in high position on the wall, with a maximum
height of 2,2 m (except for use in Cooling only).
4.7.1 Preliminary warnings
 Avoid installing the unit near:
• obstacles or barriers that cause recirculation of the
exhaust air
• narrow places where the sound level of the appliance
can be enhanced by reverberations or resonances
• -
plosive gases
• very humid environments (laundries, greenhouses,
etc.)
• environments with aggressive atmospheres
• solar radiation and proximity to heat sources
• rooms subject to high frequencies
 Do not install over heat sources.
 Make sure that:
• the installation site of the unit must be chosen with
the utmost care to guarantee adequate protection
from shocks and consequent damage
• the wall is able to support the weight of the appliance
• the wall section does not feature building supporting
elements, pipes or power lines
• the wall surface is perfectly levelled
• there are no obstacles to the free circulation of air
• the appliance must be installed in a position where it
can be easily serviced
• the safety distances between the units and other ap-
pliances or structures are scrupulously respected so
that the air entering and leaving the fans is free to
circulate
 If the appliance is installed incompletely or on an inap-
propriate base, it could cause damage to persons or
property if it should detach from its base.
 The unit should not be installed in a position where the

 Provide the following:
• 
• a compliant power supply nearby
• 
4.8 Installation mode
The assembly steps described below and their drawings
refer to a version of the machine with connections on the
right side.
 For ideal installation and performance levels, carefully
follow the instructions in the manual.

19
INSTALLATION
 Failure to do so may cause system malfunctions and
automatically voids the warranty, and relieves the con-
structor of any harm caused to person, animals or
property.
4.9 Installation minimum distances
The clearance zones for the installation and maintenance
-

normal cleaning and maintenance.
 The minimum depth of the wall on which the unit
is to be installed must be 160 mm.
          
panels to be removed for routine and supplementary
maintenance operations.
20 mm 20 mm
120 mm
4.10 Installation arrangement
To install the unit, prepare the wall for housing the metal
casing.
The unit is supplied without accessories. The formwork for
installing the unit is supplied separately for installation on
site.
 The metal case for housing the unit must already be
prepared on the wall before installing the appliance.
 The metal casing kit is supplied separately. Please refer
to the installation instruction sheet.
4.11 Positioning
4.11.1 Preliminary warnings
 Make sure that:
• the wall supports the weight of the appliance
• 
or electrical lines
• the functionality of load-bearing elements is not com-
promised
 It is necessary, for right functioning of the device, that
during the whole installation phase the working space
remains clean.
 
metal casing.

20
INSTALLATION
4.11.2 Predisposition
Condensate tray installation

condensation collection tray provided.
 The tray is mandatory when using the appliance in
Heating and Cooling mode.
 When using the unit in Heating only mode, the conden-
sate collection tray may not be installed.
 In case of installation of the condensate drip tray,
provide for the inlet of the pipes from the side or
from the back.
A 
A
To install the side tray:
– 
A Condensate collection tray
B 
A
B
– insert condensation collection tray
– 
 -
ed by the bracket and the screw supplied.
4.11.3 Device preparation
Before proceeding with the installation, it is necessary to
remove some elements from the appliance.
Removal of the front support panel
1. Metal casing
2. Supporting front panel
1
2
          
means of a Push & Pull opening system.
To remove the front support panel
– press on the front support panel
– the push-pull front support panel opens
– remove the front support panel