Innovative Concepts in Entertainment Hammerhead Instruction Manual

OWNERSAND SERVICE MANUAL
INNOVATIVE CONCEPTS IN ENTERTAINMENT INC.
10123 MAIN STREET, CLARENCE, NY 14031
SERVICE: 1–716–759–0360
FAX: [phone]
E–MAIL: [email protected]

INTRODUCTION.............................................. PAGE 3
GAME FEATURES
GAME PLAY
INSTALLATION................................................. PAGE 4
BEFORE YOU BEGIN
INSTALLATION
PROGRAMMINGOPTIONS ............................ PAGE 5 & 6
INTRODUCTION
USING THE PROGRAMMING OPTIONS
MAINTENANCE ............................................... PAGE 7
QUICK TROUBLESHOOTING......................... PAGE 8
GAMEREPAIR................................................. PAGE 9 – 11
OPERATIONAL BACKGROUND
TROUBLESHOOTING PHILOSOPHY
MECHANICAL REPAIR
PARTS LISTINGS ............................................ PAGE 12
SCHEMATICS.................................................. PAGE 13 – 15
WIRINGDIAGRAMS........................................ PAGE 16 – 25
TABLE OF CONTENTS

INTRODUCTION
GAMEFEATURES
Thankyouforpurchasing thenewHammerhead"game
from I.C.E. This new “WACKY” game utilizes all the
proventechnologyofit’s predecessor Smack–n–Alien. ICE
has taken out the cost but not the quality, giving the
customer a fresh look with full reliability.
Game cabinetry is stylish, yet bright. The game has been
designed to be either a back–to–back centerpiece or a
wall unit that will enhance the look of any location. Thick
16gaugemetalpanelsand marine grade waterresistant
plywoodmakethegameextremely durable. The boatbow
is made of a special high impact styrene that is easy to
maintain.
The distortion printed marquee is made of .187 PETG.This
is back printed, which will prevent the customer from
damagingtheprinting.The PETG is moredurablethan
acrylic and therefore will withstand impact better.
Electronics and sounds are the state of the art in digital
technology.Robustdesign ensures a long troublefreelife
for your game. The game is very flexible with its
programming options to allow it to be tailored to most
locations easily.
GAMEPLAY
The object of the game is to hit as many sharks as
possible in the time allowed. (Note: the player must try to
hit the sharks that are in the up position to score points)
The player does not get penalized for missing a shark.
The high score for the day will be displayed for all new
players to try and match.
(NOTE: There is a bonus shark, the shark that pops up
before game play starts. If a player hits that on he will be
awardedoneextrapoint.)

INSTALLATION
BEFORE YOU BEGIN
WARNING: WHENINSTALLINGTHISGAME,A
GROUNDEDA.C.RECEPTACLEMUSTBE USED.
FAILURETODO SO COULDRESULTIN INJURYTO
YOURSELFOROTHERS.FAILURE TOUSEA
GROUNDEDRECEPTACLECOULDALSOCAUSE
IMPROPERGAMEOPERATION, OR DAMAGETOTHE
ELECTRONICS
DONOTDEFEATORREMOVETHEGROUNDING
PRONGONTHEPOWERCORD FOR THE SAME
REASONAS GIVENABOVE. USINGAN IMPROPERLY
GROUNDEDGAMECOULD VOIDYOURWARRANTY.
HAVEAQUALIFIED ELECTRICIANCHECKYOU’REA.C.
RECEPTACLETO BE SURETHEGROUND IS
FUNCTIONINGPROPERLY.
TOOLS NEEDED
Thegamenormallycomesfully assembled and readyfor
use.
Ifhowever,youneed to disassemble orreassemblethe
marquee to the game for any reason, all that is needed is
a 5/32 securityAllen wrench.
INSTALLATION
The game comes ready to play with just a few simple
things to keep in mind.
1. When installing the game, be sure you use a
groundedA.C. outlet. If necessary, have it checked to
be sure the ground is good.
THISGAMEIS DESIGNEDTODISSIPATESTATIC
ELECTRICITYTHROUGH THEGROUNDING PLANEOF
THE GAME. IF THEA.C. GROUND DOES NOT WORK,
THEGAMECOULDDISCHARGESTATICELECTRICITY
THROUGHTHEGAMECIRCUITRY,WHICHCOULD
CAUSE DAMAGE.
Make sure the game is level after installation. It is
necessary to make sure the game is level so the
gamewillworkproperly.
Place the game into its final location and use the adjusting
CAUTION:CHECKTHATTHEA.C.VOLTAGERATING ON
THE BACK OF THE GAME MATCHES THEA.C.
VOLTAGEOFYOURLOCATION.
THE POWER SUPPLY IS NOT VOLTAGEADJUSTABLE.
TOOPERATETHEGAMEATVOLTAGES OTHERTHAN
THOSEITWASDESIGNED FOR, PLEASE CONTACT
OURSERVICEDEPARTMENTFORVOLTAGE
CONVERSIONINFORMATION.
Plug the game into theA.C. outlet and turn on power to
the game. The switch for the game is located on a power
module on the outside rear of the game.
It is now time to program your game&&..

PROGRAMMING
INTRODUCTION
TheHammerhead"gameisextremelyflexible from a programming standpoint. Thisallowsthecustomerto“fine tune” the
game to his or her exact needs.
This section will describe in detail each of the programming options and how they work.
PLEASEREADTHISSECTIONTHOROUGHLYBEFORECALLINGOURSERVICEDEPARTMENT.MOSTQUESTIONS
REGARDINGSET–UPANDOPERATION WILLBEFULLYEXPLAINED HERE.
HOW TO USE THE PROGRAMMING OPTIONS
PROGRAMMING BUTTON - Use this button to enter and exit the programming mode. Press this button once to enter the
mode, and once again to exit the mode.
SELECTBUTTON-Usethisbutton to scroll through and “step”throughthevariousoptions.
ADVANCE BUTTON-Usethisbutton to “change” the value ofaparticular option.
TICKETRESET BUTTON – Use this button to “reset” ticket counter.
SELECTBUTTON
PROGRAMMINGBUTTON
TICKETRESETBUTTON
ADVANCEBUTTON

PROGRAMMING
OPTION DEFAULT MIN / MAX DEFINITION
O 7 00 10 Volume adjustment
1 2 01 09 coins per credit switch 1
2 1 00 09 # of coin 1’s per credit switch 2
3 20 10 99 number of seconds per game
4 2 00 06 difficulty (lower = easier)
5 2 00 09 tickets just for playing
6 5 01 10 hits per tickets
7 25 00 99 ticket cap per game
8 5 00 99 minutes between attract mode
9 3 01 03 attract mode type
10 00 00 01 factory reset
NOTE: After the factory reset has been selected, the programming button must be
pressed twice to exit.

MAINTENANCE
GENERALMAINTENANCE
This game has been designed to be as trouble and
maintenancefreeaspossible.
With this in mind the only basics are to keep the game
clean. Below are the main areas to take care of with
specificdirections.
MARQUEE
TheMARQUEEshouldbecleanedwith a soapy water
solutionifcoveredwithwater–based dirt such asfood
products.After cleaning with soapy water, polish with a
commercial plastic polish or a spray furniture polish.
These have lubricating oils that condition the plastic and
keep it shiny and clear looking. Never use regular glass
cleaners as the ammonia in them actually damages the
plastic and dulls it.
Any deep scratches can be reduced or eliminated with a
scratchremovingpolishand buffingwheel.
CABINET
The cabinet plastic and decals can be cleaned with soapy
water or spray furniture polish. DO NOT use any alcohol or
petroleum based cleaners as they could damage the
plastic or printed parts.
COINMECHANISMS
The coin mechanisms should be cleaned periodically, as
they will accumulate dirt, which will cause the coins to
stick.
Remove the coin mech and clean them in a dish detergent
solution and a stiff brush. Dry thoroughly and re–install.
TICKETDISPENSERS
The biggest problem ticket dispensers have is ticket dust
blocking the optical detectors. It is a good idea to
occasionally use compressed air to remove the dust from
thedispensers.
SHARKHEAD
The sharks should be cleaned with a soapy water solution.
Be sure to wring the sponge out before cleaning. Excess
water may drip onto coil bed assembly and cause
permanentdamage.
LUBRICATION
We do not recommend the use of any lubrication
anywhereonthegame.
The only moving parts on the game are the sharks. If you
notice any sticking or binding of the sharks check the
following.
– Dirt on the solenoid shafts - Remove the solenoid
shafts, clean with isopropyl alcohol. Finish wiping
clean with a good grade of spray polish only.
– Wear - If excessive solenoid body wear is noted,
replace the solenoid coil.

QUICKTROUBLESHOOTING
GAME WILL NOT TAKE OR ADD MONEYCORRECTLY
•Micro switch not working or returning properly. Check and repair or replace as necessary.
•Bad Harnessing or connector. Check w/ohm meter and repair as necessary.
•Gameprogrammingsetincorrectly.Checkprogrammingoption and re–program ifnecessary.
Bad Main P.C. Board. Check and repair or replace as necessary.
SHARKS WILL NOT POPUP DURING GAME PLAY
•Opto Sensor is not working properly.Test and replace as necessary.
•Reflective foil is not properly in place. Reapply foil correctly.
•Bad harnessing or connector. Check w/ohm meter and repair as necessary.
•Bad Main P.C. Board. Check and repair or replace as necessary.
GAME HAS NO SOUND
•Bad speaker. Check w/ohm meter for 4 or 8–ohm load. If not within this range, replace.
•Volumelevelsetincorrectly. Check volumelevelinprogramming,and adjust if necessary.
•Bad Harnessing or connector. Check w/ohm meter and repair as necessary.
•Bad Main P.C. Board. Check and repair or replace as necessary
TICKET DISPENSER DOES NOT WORK OR WORKS IMPROPERLY
•Bad ticket dispenser. Repair or replace as necessary.
•Bad harnessing or connector. Check w/ohm meter and repair as necessary.
•Bad Main P.C. Board. Check and repair or replace as necessary.
•Game out of tickets.Add tickets
•Optical sensor on ticket dispenser dirty. Remove paper fuzz and debris with a soft brush.
NOFLORESCENTLIGHTING
•Bulbburnedout.Replacebulb.
•Electronic ballast bad. Replace ballast.
•Harness bad or harness unplugged. Check w/ohm meter and plug in, repair or replace as necessary.
•NoA.C. power to the game or Main fuse bad. Check fuse andA.C. power.
TICKETS OR HIGH SCORE DISPLAY Don’t WORK PROPERLY
•Bad Display P.C. Board. Repair or replace Display board
•BadMainP.C. Board.Repairor replace Main board.
•Bad display harnessing. Repair as necessary.
CAN’T ENTER OR EXIT PROGRAMMING OR OTHER ADJUSTMENT MODES
•Badprogrammingoradjustmentbuttons.Replace buttons. Check harnessing.
•BadMainP.C. Board.Repairor replace Main board.

GAME REPAIR
WARNING: ALWAYS REMOVE POWER TO
THE GAME BEFORE ATTEMPTING ANY
SERVICE, UNLESS NEEDED FOR SPECIFIC
TESTING.
FAILURE TO OBSERVE THIS PRECAUTION
COULD RESULT IN SERIOUS INJURY TO
YOURSELF OR OTHERS.
OPERATIONAL
BACKGROUND
The HAMMERHEAD" game has been manufactured
with modular design in mind. Almost everything in the
game can be EASILY removed for servicing. This
makes it much easier for the repairman as he / she
can work in a quieter less distracting environment
away from the Game Room floor. The game relies on
1 coil bed assembly which can be remove from the
game very easily.
Coin and low ticket sensing are done with
conventional micro switches. In all areas of critical
importance, optical sensors were developed
specifically, and optimized for their particular
application.
All P.C. Boards are made of premium quality board
material and use time proven components to assure
you of the most reliable designs possible.
We have put forth our best efforts and tested this
game extensively to assure the best possible
performance under the widest variety of operating
conditions. We are ALWAYS however interested in our
customers input for product improvement. If you have
any questions or comments please feel free to
contact our service department.
I.C.E. SERVICE DEPARTMENT
716–759–0360
NORMALBUSINESSHOURSARE:
MONDAY - FRIDAY, 8:00AMTO 5:00 PM
TROUBLESHOOTING
PHILOSOPHY
To find problems with the game, always first check
what should be obvious. See that the game is
plugged in, and that all of the fuses on the game are
good. This includes the fuse that is located INSIDE
the power module.
Next, check to see that all of the connectors are firmly
seated and that none of the wires have been pulled
out of them.
When trying to find out if specific components are bad
or not. This will help you to know if you have a
problem with a specific component, or maybe a
problem with either the wiring or the Main P.C. Board.
Use extreme caution when using probes or voltmeters
if the game is powered up. If doing continuity checks,
it is important to disconnect the harnessing at both
ends, as attached they may yield erroneous results.
If a P.C. Board is suspected as the cause of a
problem, check to see that all of the components on
the board are firmly attached. Pay special attention to
any socketed devices.
If light bulbs are suspected, swap them with a bulb
that is known to work to narrow the problem down to
either a bulb or P.C. Board.

GAME REPAIR
REPLACEMENT & REPAIR
COIL BED SERVICING
To remove the coil bed:
1. Remove the 4 bolts that hold the boat bow on to
the cabinet. The bolts are located on the
underside of the playfield, on the left & right sides
of the game.
2. Remove the 6 bolts holding the coil bed in
position as shown in the photo below.
3. Unplug the multi pin connector by twisting off.
COIL BED PARTS REPLACEMENT
Service the coil bed as follows:
Remove all the shark heads from the coil bed. To
remove sharks, turn the coil bed over so that the
coil bed is resting on the shark heads. Remove
the Allen head screw from the shaft. Cut the wire
tie and remove the locking pin. Pull the shark
heads through the coil bed.
Unplug the Sensor PCB Assembly. Remove the two
Nylok nuts holding the coil cap.
Disconnect the wires to the coil & remove.
Assemble in reverse order.
UNPLUG
REMOVE NUTS
REMOVE
SCREW
CUT WIRE TIE & REMOVE PIN

GAME REPAIR
Using a Phillips screwdriver, remove the four screws
that hold the board in place.
Repeat the previous steps to remove the second
display.
IF YOU HAVE ANY QUESTIONS OR
COMMENTS, PLEASE CONTACT OUR
SERVICE DEPARTMENT AT:
716–759–0360
MON. THRU FRI. 8AM–5PM EST
MARQUEE BULB / DISPLAY
BOARD SERVICE
To replace a light bulb:
Remove the square drive screws on the rear of the
marquee, that attach the lamp mounting panels.
Start with the side that looks like the light is out.
Display Board follow the directions below:
CAUTION: Be sure that the power has been
disconnected before attempting to unplug the
Display Boards.
Remove the security Allen bolts around the perimeter
of the marquee.

PARTSLISTING
Parts denoted with * indicate available as part of
aspeciallydiscounted spares kit.
MECHANICALPARTS
211 Low Ticket Micro Switch
BW250X PLL Bulb Socket Assembly
FP1004 LegLevelerMounting Bracket
HR1019 LevelerFoot
1024 Ticket Bin
1026 Bracket, Low Ticket Switch Mounting
AR2007 Speaker, 6” x 9”
BW2017 PLLBulbRetainingClip
BW2018 PLLBulbSupport
2027 Fan, DC 12 Volt
CC2027 PowerCord,20ft.
5101X MechHolderAssembly
BW8284X Workhorse6Ballast,(WH6–120–L)
8312* Bulb,PL–L40W/41/RS/ISFluorescent
HH5005 TicketDispenser
WA4010 Mallet
WS4011 SharkHead
175 Immonex Mech.
1026 Low Ticket Switch
2289 Reset Button
8212 FlashingLED(LowTicket)
CG2027 PowerCord9’
2364 Coil Bed Fan
WA1054 Limiting Pin
8312 Light Bulb
MZ8284X Ballast Workhorse 6
WS7027X MarqueeVacuum Form
WS3004 Boat Cleat
WS8444X JewelLightAssembly
WS2011X Shark HeadAssembly
WS9001 ServiceManual
ELECTRONIC/ ELECTRICAL
WS2034X MainPCB
WS2032X DisplayBoards
2295 Fuse, MDQ6 (6Amp Slo Blo)
2315 Fuse, MDQ3 (3Amp Slo Blo)
DECALSANDGRAPHICS
WS7003 BOAT DECK DECAL
WS7005 FRONTDECAL
WS7112 RIGHTSIDEDECAL
WS7110 LEFTSIDEDECAL
WS7027 MARQUEE(BACKDROP)
WS7006 ICELOGO

D
C
B
A
4321
D
C
B
A
4321
DATE 7/9/01
DESCRIPTION #WS2051AX - DISPLAY
INTERCONNECT HARNESS DRAWN BY MMARTIN
FILENAME WS.VSD
PAGE 1 OF 10 REVISED 8/15/01
TITLE HAMMERHEAD
KEY
Ground
Ground
KEY
D CLK
D DATA
D LATCH
12 VDC
12 VDC
KEY
KEY
BLACK
BLACK
KEY
brown/red
brown/green
brown/white
ORANGE
ORANGE
KEY
KEY
Ground
Ground
KEY
D CLK
D DATA
D LATCH
12 VDC
12 VDC
KEY
KEY
BLACK
BLACK
KEY
brown/red
brown/green
brown/white
ORANGE
ORANGE
KEY
P1
To Display Board To Display Board
10
9
8
7
6
5
4
3
2
1
10 PIN AMP HOUSING #2291
CONTACT PIN #2201
PINS 1, 7, AND 10: KEY PLUG #2239
10
9
8
7
6
5
4
3
2
1
10 PIN AMP HOUSING #2291
CONTACT PIN #2201
PINS 1, 7, AND 10: KEY PLUG #2239
P2

D
C
B
A
4321
D
C
B
A
4321
DATE 7/9/01
DESCRIPTION #WS2051X - DISPLAY HARNESS DRAWN BY MMARTIN
FILENAME WS.VSD
PAGE 2 OF 10 REVISED 8/15/01
TITLE HAMMERHEAD
KEY
Ground
Ground
KEY
D CLK
D DATA
D LATCH
12 VDC
12 VDC
KEY
KEY
BLACK
BLACK
KEY
brown/red
brown/green
brown/white
ORANGE
ORANGE
KEY
Ground
Ground
KEY
D CLK
D DATA
D LATCH
12 VDC
12 VDC
BLACK
BLACK
KEY
brown/red
brown/green
brown/white
ORANGE
ORANGE
P9 P1
To Display Board
To Main Board
1
2
3
4
5
6
7
8
8 PIN AMP HOUSING #2405
CONTACT PIN #2201
PIN 3: KEY PLUG #2239
10
9
8
7
6
5
4
3
2
1
10 PIN AMP HOUSING #2291
CONTACT PIN #2201
PINS 1, 7, AND 10: KEY PLUG #2239

D
C
B
A
4321
D
C
B
A
4321
DATE 7/9/01
DESCRIPTION # WS2052X - PROGRAMMING
HARNESS DRAWN BY MMARTIN
FILENAME WS.VSD
PAGE 3 OF 10 REVISED 8/15/01
TITLE HAMMERHEAD
#2714 5 PIN IDC
#650
.110
#650
.110
#650
.110
#650
.110
#650
.110
#650
.110
Ticket Reset
Program
Select
Advance
Ground
To Mainboard
P7 P7
#650
.110
#650
.110
violet/brown
violet/red
violet/orange
violet/yellow
black
1
2
3
4
5PRG
SEL
ADV
RESET
violet/brown
violet/red
violet/orange
violet/yellow
black
"
39
"
4
"
4
"
4

DATE 7/9/01
DESCRIPTION #WS2053X - JEWEL LIGHT HARNESS DRAWN BY MMARTIN
FILENAME WS.VSD
PAGE 4 OF 10 REVISED 8/15/01
TITLE HAMMERHEAD
9 PIN PLUG #2292
SPLIT PIN #2100
1
2
3
4
5
6
7
8
9
white/brown
white/red
white/orange
white/yellow
white/green
white/blue
orange
orange
Jewel 1
Jewel 2
Jewel 3
Jewel 4
Jewel 5
Jewel 6
12 VDC
12 VDC
ABCD
E
F
1
2
3
4
5
6
D
C
B
A
4321
D
C
B
A
4321
Jewel 6 Jewel 5 Jewel 4 Jewel 3 Jewel 2 Jewel 1 Jewel A Jewel B Jewel C Jewel D Jewel E Jewel F
#651
.187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187 #651 .187
#651
.187
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M
#2909
.187
M

D
C
B
A
4321
D
C
B
A
4321
DATE 7/9/01
DESCRIPTION #WS2054X - SPEAKER HARNESS DRAWN BY MMARTIN
FILENAME WS.VSD
PAGE 5 OF 10 REVISED 8/15/01
TITLE HAMMERHEAD
1
2
3
4
55 PIN AMP HOUSING #2419
CONTACT PIN #2201
P1
To Main Board
Right Speaker -
Right Speaker +
Left Speaker -
Left Speaker +
#653T
.250
#653T
.250
#653T
.250
#653T
.250
To Left Speaker
To Right Speaker
brown/white
red/white
brown/gray
red/gray
brown/white
red/white
brown/gray
red/gray

D
C
B
A
4321
D
C
B
A
4321
DATE 7/9/01
DESCRIPTION #WS2056X - MARQUEE HARNESS DRAWN BY MMARTIN
FILENAME WS.VSD
PAGE 6 OF 10 REVISED 8/15/01
TITLE HAMMERHEAD
1
2
3
3 PIN PLUG #2206
SOLID PIN #2100S
3 PIN CAP #2288
FEMALE #2102
1
2
3
# 8173 - 3 COND. SVT
BLACK
GREEN
WHITE
AC L
EARTH GND
AC N
BLACK
GREEN
WHITE
AC L
EARTH GND
AC N

D
C
B
A
4321
D
C
B
A
4321
DATE 7/9/01
DESCRIPTION #WS2057X - COIN DOOR HARNESS DRAWNBY MMARTIN
FILENAME WS.VSD
PAGE 7 OF 10 REVISED 8/15/01
TITLE HAMMERHEAD
1
2
3
4
5
66 PIN AMP HOUSING #2944
CONTACT PIN #2201
#650
.110
#650
.110
#651
.187
#651
.187
#653T
.250
#653T
.250
To Coin Lamps
To Lockout
Coils
To Coin Switch 1
#650
.110
#650
.110
To Coin Lamps
#653T
.250
#653T
.250
To Coin Switch 2
12 VDC
Lockout Coil
Ground
Coin In 1
Coin In 2
Ground
orange * 2
gray/yellow
black
gray/brown
gray/red
black
orange
black
orange
black
orange
gray/yellow
gray/brown
black
gray/red
black
#651
.187
#651
.187
To Lockout
Coils
orange
gray/yellow

D
C
B
A
4321
D
C
B
A
4321
DATE 7/9/01
DESCRIPTION #WS2058X - TICKET DOOR HARNESS DRAWN BY MMARTIN
FILENAME WS.VSD
PAGE 8 OF 10 REVISED 8/15/01
TITLE HAMMERHEAD
1
2
3
44 PIN AMP HOUSING #2429
CONTACT PIN #2201 4 PIN MLX CAP #2158
FEMALE PIN #2176
PINS 2 & 4: 20-14 AWG FEMALE PIN #8177
1
2
3
4
1
2
2 PIN MOLEX HOUSING #2089
MINI KK PIN #2074
RED FLASHING LED #8212
WITH LED HOLDER #1017
violet/blue
BLACK + black
violet/white
ORANGE + orange
T Sense
P GND
T Run
+ 12VDC
orange
violet/green + 12VDC
T Out
#651
.187
violet/green
black
To Ticket
Dispenser
To Low Ticket
Switch
#649
.187
ORANGE
violet/blue
violet/white
BLACK
12 VDC
Ticket Sense
Ticket Run
Ground