Inovus Medical LapAR User guide

www.inovus.org [phone] [email protected]
accessible affordable functional
LapAR™ Setup Manual

P1.
1 | When opening your simulator it
is recomended that you unpack all
package contents and arrange them
before starting construction. Once
you have done this, take the first part
labelled AR20_BTM01 and lay it on a
secure flat surface.
2 | Now take the following parts
2x MA01, AR20_U02, 2x WN14 &
2x M5B24. Using the image as a
guide, pay close attention to the part
orientation in this step or you will have
to undo work at a later stage.
3 | Screw into place 2x MA01 using
2x M5B24 and 2x WN14
(Use the pin on part MA01 to find the
correct position)

P2.
4 | Repeat the last two steps with
the same parts on the front panel
AR20_U01 as shown in the image.
5| Take 4x AR20_M-BKT, position them
in the keys provided. In a practical
sense this will need to be done one at
a time with the simulator positioned on
its side.
6 | Using 4x M5B24 screw each
AR20_M-BKT into position on the base.
These parts are threaded for ease of
assembly.

P3.
7 | At this stage the simulator should
look exactly like the reference image.
If something appears to be incorrect,
go back through the steps again.
8 | Locate the following parts
1x AR20_TPB01, 2x AR20_BKT,
2x AR20_SK, 6x M5B24 & 6x WN14 to
begin the top bracket sub-assembly.
Placing the AR20_SK on to the top
surface of the AR20_TPB01 ensure that
the holes align correctly. You can now
position the black AR20_BKT on top of
the silicone skin, pushing three M5B24
through the holes. Now move to the
next step.
9 | Now attach 3x WN14 to the bolts
coming through the bottom surface.
Repeat this process on the opposite
side to complete the assembly.

P4.
10 | Remove the AR20_CAM from its
packaging and place into positon as
shown.
11 | Take 2x M5B24 bolts and affix the
AR20_CAM into position. DO NOT
plug-in at this stage.
12 | Take the sub-assembly from the last
four steps and place it over the upright
panel of the simulator as shown.

P5.
13 | Using 4x MA01, 4x WN14 &
4x M5B24, repeat the process from
steps 2,3 & 4. Do this on each corner
so that a magnet is in place for the side
panels to connect into.
14 | It is important to note that the
simulator is capable of multiple
platform positions. When inserting
AR20_TAB you will most commonly use
the angled base for Augmented Reality
applications.
15 | You will use the flat platform
for LapPass®and any other non-AR
tasks. Enterprise users can use this for
any tasks they like, including those
where electro-surgical instruments are
required.

P6.
16 | Snap into place both side panels
and move on.
17 | Connect the USB micro into the
back of the camera.
18 | Connect the other end of this
cable into your Laptop or PC. You will
have received a link from us shortly
after purchase. Follow this to download
the software platform required.
This email also contains user account
information such as an activation code
and a link to your online portfolio.
All other instructions are given inside
the software.

E: [email protected]
T: [phone]
W: www.inovus.org
@inovusmedical
All products contained in this catalogue are Copyright Inovus Ltd 2020
Full price list available on request: [email protected]g
accessible affordable functional
Warranty
This limited warranty applies to any order, purchase, receipt, delivery or use of any products and services (collectively, in a “purchase”) from Inovus Ltd or any of its
subsidiaries or affiliates or authorised reseller (“reseller”). If you enter into a separate written agreement with any of the aforementioned this warranty may be declared
null and void.
This warranty applies to your purchase unless you notify Invous® Ltd in writing that you do not agree to this agreement within 15 days after you receive this agreement
and you return your product or cancel services under Inovus Ltd’s refund policy. This agreement contains a dispute resolution clause (please see below).
THE TERMS AND CONDITIONS APPLICABLE TO INOVUS© LIMITED WARRANTY ARE AS SET FORTH BELOW:
Limited Warranty
Inovus® Ltd warrants to the end user (“Customer”) that the product will be free from defects in workmanship and materials, under normal use and service, for one (1)
year, or such longer period as Inovus® Ltd may announce publicly from time to time for particular products, from the date of purchase from Inovus® Ltd or an
authorized reseller. Inovus® Ltd’s sole obligation under this express warranty shall be, at Inovus® Ltd’s option and expense, to repair the defective product or part,
deliver to Customer an equivalent product or part to replace the defective item, or if neither of the two foregoing options is reasonably available, Inovus® Ltd may, in
its sole discretion, refund to Customer the purchase price paid for the defective product. All products that are replaced will become the property of Inovus® Ltd.
Replacement products or parts may be new or reconditioned. Inovus® Ltd warrants any replaced or repaired product or part for ninety (90) days from shipment, or the
remainder of the initial warranty period, whichever is longer. Products returned to Inovus© Ltd must be sent prepaid and packaged appropriately for safe shipment, and
it is recommended that they be insured or sent by a method that provides for tracking of the package. Responsibility for loss or damage does not transfer to Inovus®
Ltd until the returned item is received by Inovus® Ltd. The repaired or replaced item will be shipped to Customer, at Inovus® Ltd’s expense, no later than thirty (30)
days after Inovus® Ltd receives the defective product, and Inovus® Ltd will retain risk of loss or damage until the item is delivered to Customer.
Exclusions
Inovus® Ltd will not be liable under this limited warranty if its testing and examination show that the alleged defect or malfunction in the product does not exist or
results from:
• Failure to follow Inovus® Ltd installation, operation, or maintenance instructions
• Unauthorized product modification or alteration
• Unauthorized use of common carrier communication services accessed through the product
• Abuse, misuse, negligent acts or omissions of Customer and persons under Customer’s control; or
• Acts of third parties, acts of God, accident, fire, lighting, power surges or outages, or other unpredictable random hazards.
WARRANTY EXCLUSIVE. IF AN INOVUS® LTD PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY FOR BREACH OF THAT
WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT INOVUS© LTD’S OPTION. TO THE FULL EXTENT ALLOWED BY
LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS
OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF , FITNESS
FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY
DISCLAIMED. INOVUS® LTD NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.
Support and service agreements
If you purchased your product from an Inovus® Ltd Authorized Reseller, contact the Authorized Reseller for information about support and service agreements
applicable to your product. For information on Inovus® Ltd’s service, go to the Inovus Ltd web site www.inovus.org, or contact Inovus® Ltd at [email protected].
Limitation of Liability
TO THE FULL EXTENT ALLOWED BY LAW, INOVUS® LTD EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE,
INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF INOVUS® LTD OR ITS AUTHORIZED RESELLER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
PAID, AT INOVUS® LTD’ OPTION.
THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Returns Policy
Thank you for purchasing from Inovus. If you are not entirely satisfied with your product then there are few ways we can help:
Returns
You have 14 calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you
received it. Your item must be returned in the original packaging and you must have the receipt or proof of purchase. Responsibility for the product will remain with you
until it is received by Inovus.
Refunds/Replacements
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after
inspecting the item. If your return is approved, we will initiate a refund to your credit card (or original method of payment) or dispatch a replacement item depending
on your preference. If you opt for a full refund you will receive the credit within a certain amount of days, depending on your card issuer’s policies.
Shipping
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are nonrefundable. If you receive a refund, the cost of return
shipping will be deducted from your refund.
Contact Us
If you have any questions on how to return your item to us, contact us via email at [email protected] or telephone on ([phone].