V1 ENGLISH 18-0080
Device charges slowly
• Your device may charge more slowly with the charging pad than
a charging cable. This is normal behavior.
• Make sure that your device is positioned in the center of your
charging pad.
SPECIFICATIONS
Qi Wireless Charging Pad:
• Input: DC 5V/2A
• Output: 5W max.
• Dimension: 3.5 × 3.5 × .3 in. (90 × 90 × 8 mm)
• Weight: 35±5 g
LEGAL NOTICES
FCC Information
FCC Caution:
Changes or modications not expressly approved by the part responsible for compliance
could void the user's authority to operate the equipment.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipement into an outlet on a circuit dierent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC statement: This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
RSS-Gen statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
SAFETY INFORMATION
1Do not attempt to disassemble the product. It may result in short-circuit or
damage.
2The product should be kept in a dry and ventilated environment. Do not
store it in an area of high humidity and high temperature.
3Do not use organic solvent to clean the product.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
1-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
LED INDICATOR STATUS
TROUBLESHOOTING
Device not charging/LED is red
• Make sure that your device is Qi-enabled.
• Make sure that your charging pad is connected to a
working power outlet.
• Make sure that your device is positioned correctly
on your charging pad.
• Make sure that there are no other objects on the charging pad.
• Remove your device’s case. It may be blocking the wireless signal.
LED
Blue
Red
O
STATUS
Device is charging.
Device is not charging. See "Troubleshooting" for more information.
Charging pad is not connected to power.
