Insignia Qi NS-MWPC5CU User manual

PACKAGE CONTENTS
• Qi Wireless Charging Pad
• 3 ft. (1m) Micro USB
charge/sync cable
• USB wall charger
• Quick Setup Guide
FEATURES
• Works with most Qi-enabled smartphone devices
• LEDs show your charging status
• Lightweight and compact design for added portability
• Wireless design lets you charge devices without cumbersome cords
PRODUCT OVERVIEW
Before using your new product, please read these instructions to prevent any damage.
USING YOUR CHARGING PAD
1 Connect the micro USB charge/sync cable to the micro USB port
on your charging pad.
2 Plug the USB connector into the power adapter.
3 Connect the power adapter to the power outlet.
4 Place your Qi-enabled device on the center of the charging pad
with the screen facing up. The LED is blue when your device is
charging.
Note: If the LED is red, your device is not charging.
See “Troubleshooting”for more information.
QUICK SETUP GUIDE
Qi Wireless
Charging Pad
NS-MWPC5CU / NS-MWPC5CU-C
COMPATIBILITY
Works with all Qi v1.2 and newer
devices. This includes iPhone 8,
iPhone X, Samsung Note 5, S6,
S6 Edge, S7, S8, and Note 8.
Micro USB port
LED indicator Micro USB charge/sync cable
Power adapter
LED indicator

V1 ENGLISH 18-0079
Device charges slowly
• Your device may charge more slowly with the charging pad than
a charging cable. This is normal behavior.
• Make sure that you are using the power adapter that came with
this product.
• Make sure that your device is positioned in the center of your
charging pad.
SPECIFICATIONS
Qi Wireless Charging Pad:
• Input: DC 5V/2A
• Output: 5W max.
• Dimension: 3.9 × 3.9 × .6 in. (100 × 100× 14 mm)
AC Power Adapter:
• Input: ~100-240V 50/60Hz
• Output: DC 5V/2A
LEGAL NOTICES
FCC Information
FCC Caution: Changes or modications not expressly approved by the part responsible for compliance
could void the user's authority to operate the equipment.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipement into an outlet on a circuit dierent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC statement: This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
RSS-Gen statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
SAFETY INFORMATION
1Use only the power adapter that came with the product. Do not make
unauthorized changes to the power supply.
2Do not attempt to disassemble the product. It may result in short-circuit or
damage.
3The product should be kept in a dry and ventilated environment. Do not
store it in an area of high humidity and high temperature.
4Do not use organic solvent to clean the product.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
LED INDICATOR STATUS
TROUBLESHOOTING
Device not charging/LED is red
• Make sure that your device is Qi-enabled.
• Make sure that your charging pad is connected to a working
power outlet.
• Make sure that you are using the power adapter that came
with this product.
• Make sure that your device is positioned correctly on your charging pad.
• Make sure that there are no other objects on the charging pad.
• Remove your device’s case. It may be blocking the wireless signal.
LED
Blue
Red
O
STATUS
Device is charging.
Device is not charging. See "Troubleshooting" for more information.
Charging pad is not connected to power.