InSite LBT-505 User manual

Keep Track of the Things You Value Most.
LBT-505
Bluetooth Wireless
Separation Alarm
User’s Manual

2
Congratulations on your purchase of the LBT-505 Bluetooth® Wireless
Separation Alarm with incoming call alert. Please read the instruction
manual for this product before using it. The documentation provided
will allow you to fully enjoy all the features this unit has to oer. Please
save this manual for future reference.
Bluetooth® is a trade mark of Bluetooth Special Interest Group (SIG)
Inc.
What’s In the Box?
• Bluetooth® LBT-505 module with wristband
• Lanyard clip
• USB cable
• Owner’s Manual

3
1. Multi-Function Button
2. Blue LED Indicator - LED lights or blinks depending on the unit’s
status.
3. Charging Port - Allows for the connection of a mini USB
connector which is used the charge the battery.
4. Lanyard Hole - Connection point for the lanyard.
1
2
3
4

4
Charging
Make sure the product is fully charged before you start using it. The
product is not functional while charging.
Charging
1. Using the USB cable, connect the mini USB connector to the
Charging Port. Connect the USB connector to a USB connection
port (for example, a computer, USB charger, etc.).
2. The blue LED is steadily lit while the battery is charging.
3. When the unit is fully charged, the blue LED turns o.
Low Battery Warning
When the battery is low, the unit vibrates 4 times every 30 seconds.
Operating and Charging Duration
Charging: Approximately 2 hours
Standby mode: Approximately 90 hours

5
Power On/O
Power On
Press and hold the Multi-Function Button for 3 seconds. The blue LED
blinks 3 times until the power is on. The unit will continue to blink
once every 5 seconds for a 30 second period.
Power O
Press and hold the Multi-Function Button for 4 seconds. The blue LED
blinks 4 times until the power is o.

6
Pairing
Note: Before you use the unit, you must pair it with your mobile phone.
The following procedure is generic.
1. Make sure the unit is turned o.
2. Press and hold the Multi-Function Button for 6 seconds until blue
LED is steadily lit.
3. Set your Bluetooth® mobile phone to discover the product.
For most mobile phones, you can nd Bluetooth® mode by
selecting Setting > Wireless & Networks > Bluetooth (For further
information, refer to your mobile phone’s instruction manual.)
4. When your mobile phone nds the unit, conrm it by selecting
“yes” or “ok”.
5. If applicable, enter pin code “0000” from your keypad, press “yes”
or “ok”.
6. In the case of an unsuccessful pairing, repeat steps 3 to 5.
7. When pairing is completed, the unit vibrates once shortly.

7
Auto Connection
The unit supports auto connection that makes it possible to be
automatically connected to the last connected device after turning on
your phone and by pressing the Multi-Function Button about
1 second. When the unit is o, press and hold the Multi-Function
Button about 3 seconds.
Basic Operation
Note: The unit does not support conversation function. After
connecting the unit to your mobile phone, you may not hear
sound from the mobile phone, depending on your mobile phone
maker. In this case, turn the Bluetooth o.
Incoming Call Alert
The unit vibrates twice every 2 seconds when your mobile phone
receives an incoming call.
Press the Multi-Function Button once to stop vibration.

8
Rejecting a Call
To reject a call, press the Multi-Function Button for 2 seconds.
Rejecting a call typically sends an incoming call to the mobile phone’s
voice mail.
Out-of-range Alert /Auto Connection
When the unit loses connection because it is out-of-range, it vibrates
3 times every 10 seconds. When the unit returns within connectable
range, it tries auto reconnection. When auto reconnection is
completed, the unit vibrates shortly once.
If the unit does not reconnect, then press the Multi-Function Button
once to manually reconnect.

9
LED Status Indication
Status Blue LED Indication
Power On Blue LED blinks 3 times
Power O Blue LED blinks 4 times
Pairing Mode Blue LED blinks steadily
Connectable Mode Blue LED blinks once every 5 seconds
Connected Mode Blue LED blinks twice every 5 seconds for
30 seconds*
Charging in Progress Blue LED turns on
Charging Complete Blue LED turns o
* In connected mode, the Blue LED stops ashing after 30 seconds
to save battery life. If you wish to check or conrm that the unit is
connected, press the Multi-Function Button once and the Blue LED
will once again blink twice every 5 seconds for a 30 second period.

10
Specications
Bluetooth® Core
Specication
Bluetooth® Specication 2.0
Prole Headset Prole, Handsfree Prole
1.5
Carrier Frequency 2400 MHz to 2483.5 MHz
Modulation Method GFSK, 1Mbps, 0.5BT Gaussian
Maximum Data Rate Asynchronous : 2178.1 kbps / 177.1
kbps
Synchronous : 1306.9 kbps / 1306.9
kbps
Bluetooth Class Class 2
Hopping 1600 hops/sec, 1MHz Channel Space
Transmit Power 0 dBm
Receiver Sensitivity -82 dBm / 0.1 % BER

11
Standby Time 90 Hours
Weight 19 g
Dimension 19.1 (W) x 42.5 (L) x 10 (H) mm
Charging Voltage DC 5.0 ~ 5.3 V
Charging Time 2 Hours
Operating Temperature -10° to +50°C
Storage Temperature -20° to +80°C
Battery Lithium Polymer 3.7 V 55mAH

12
Safety and General Information
1. To avoid any damage or malfunction of the unit, do not drop it
from a high place.
2. Keep the unit away from humidity, water, and any other liquid. If
the unit is directly exposed to water, moisture or any other liquid,
then do not operate it normally to avoid any electrical shock,
explosion or damage to the unit.
3. Do not place or keep the unit near heat sources such as direct
sunlight, radiators, stoves or other apparatus that produce heat.
This may cause an explosion, degrade performance, and reduce
battery life.
4. Do not modify, repair or disassemble the unit.
5. Do not place heavy objects on the unit.
6. Use only the supplied and approved USB cable.
7. Replacement or service must be done at a qualied service
center or manufacturer.
8. Unplug this unit when unused for a long period of time or during
lightning storms.

13
Compliance Information
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The manufacturer is not responsible for any interference, for example
radio or TV interference, caused by unauthorized modications to
this equipment. Such modications could void the user’s authority to
operate the equipment.

14
European Union
This product is CE marked according to the provision of the R&TTE
Directive (99/5/EC). CE0682
Audiovox Corporation declares that this product is in compliance
with the essential requirements and other relevant provisions of
Directive1999/5/EC.
Please note that this product uses radio frequency bands not
harmonized within the EU. Within the EU this product is intended to
be used in Australia, Belgium, Denmark, Finland, France, Germany,
Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain,
Sweden, United Kingdom, and within EFTA in Iceland, Norway, and
Switzerland.

15
WEEE Symbol Information
Correct Disposal of this Product
(Waste Electrical and Electronic Equipment
(Applicable in the European Union and other European countries with
separate collection systems.)
The marking shown on the product or its literature indicates that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product or their
local government oce for details of where or how they can take this
item for environmentally safe recycling. Business users should contact
their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial
wastes for disposal.

12 MONTH LIMITED WARRANTY
Applies to Audiovox Bluetooth Wireless Alarm
Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788  1-800-645-4994  128-9139
AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that
should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship
within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned
product (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the
terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specication
of defect(s), transportation prepaid, to the warranty center at the address shown below.
This warranty does not extend to damage caused by electronic discharge or to interfaced products such as computers,
power outlets, chargers etc. Connection of the alarm to other devices is the consumer’s responsibility. This Warranty does
not apply to any product or part thereof which, in the opinion of the Company, has suered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial
number/bar code label(s). THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID
BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF
ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any
liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specic legal
rights and you may also have other rights which vary from state to state.
128-9122