Integra PIPETBOY acu 2 User manual

155921_V04_QSG_PIPETBOY_acu_2.docx 1/4
Quick Start Guide PIPETBOY acu 2
This quick guide is intended to provide a brief overview of the main features and
operation of PIPETBOY acu 2. For detailed information, please refer to the Operating
Instructions of PIPETBOY acu 2 that can be found at www.integra-biosciences.com in
several languages.
Battery Charge
Charge the Li-ion battery completely before first use.
Only use the original Li-ion battery for PIPETBOY acu 2
(part no. 155 066)!
The NiMH battery for PIPETBOY acu is not compatible.
The supply voltage must meet the requirements of the mains
adapter: 100-240 VAC, 50/60 Hz.
Plug in
Low Battery Charging Battery Charged Battery
~ 3.5 h
Red Blink
Red
Green
General Speed Setting
Plug in for Turbo
Speed
50 %
Speed
100 %
Speed
125 %
Turbo Speed

155921_V04_QSG_PIPETBOY_acu_2.docx 2/4
Manual Speed Control
A
S
P
I
R
A
T
E
Slow
Fast
D
I
S
P
E
N
S
E
Gravity Dispense Slow Fast
Pump not running
Pump running
Pump running
Filter Exchange
Press (1) and turn 1/8th counter clockwise (2) Replace the filter
Colored side facing upwards

155921_V04_QSG_PIPETBOY_acu_2.docx 3/4
GENERAL INFORMATION PIPETBOY acu 2
Intended Use
PIPETBOY acu 2 is a pipette controller designed for aspirating and dispensing aqueous solutions
with plastic or glass pipettes in a volume range of 1 to 100 ml. It is intended for measurement, control
and laboratory use. Any use of this instrument in a medical or IVD setting is the responsibility of the
user.
Safety Notes
1) Do not use or charge PIPETBOY acu 2 in an atmosphere with danger of explosion.
Do not pipette highly flammable liquids such as acetone or ether.
2) Comply with the material safety data sheet (MSDS) and with all safety guidelines when handling
dangerous substances. Use protective clothing and safety goggles. Never point a pipette in
anyone’s direction.
3) Avoid pipetting of liquids whose vapours could attack the materials PA (polyamide), POM
(polyoxymethylene), FPM (fluor-rubber), NBR (nitrile-rubber), CR (chloroprene) and silicone.
Corrosive vapours could also damage metallic parts inside the device.
4) Use an original INTEGRA Biosciences mains adapter only. Protect it from moisture otherwise
PIPETBOY acu 2 might be damaged.
Regardless of the listed safety notes, additionally applicable regulations and guidelines of trade
associations, health authorities, trade supervisory offices, etc. must be observed.
Warranty
PIPETBOY pipette controllers are designed and manufactured following high standards in quality
and durability. They are warranted for a period of 12 months.
To benefit from a 3 year extended warranty, register your
PIPETBOY on www.pipetboy.info or www.integra-
biosciences.com and click on Warranty registration.
Your warranty extension will be activated after online
submission of the registration form.
Equipment Disposal
PIPETBOY acu 2 device must not be disposed of with unsorted municipal waste.
Dispose of PIPETBOY acu 2 and the battery separately in accordance with the laws
and regulations in your area governing disposal of devices.
Manufacturer
INTEGRA Biosciences AG
CH-7205 Zizers, Switzerland
T [phone]
F [phone]
INTEGRA Biosciences Corp.
Hudson, NH 03051, USA
T [phone]
F [phone]
[e-mail]
www.integra-biosciences.com

155921_V04_QSG_PIPETBOY_acu_2.docx 4/4