INTEL CORPORATION
Legal Disclaimers
•Software and workloads used in performance tests may have been optimized for performance only on Intel
microprocessors. Performance tests, such as SYSmark and MobileMark, are measured using specific computer systems,
components, software, operations and functions. Any change to any of those factors may cause the results to vary. You
should consult other information and performance tests to assist you in fully evaluating your contemplated purchases,
including the performance of that product when combined with other products.
•Intel does not control or audit the design or implementation of third party benchmarks or Web sites referenced in this
document. Intel encourages all of its customers to visit the referenced Web sites or others where similar performance
benchmarks are reported and confirm whether the referenced benchmarks are accurate and reflect performance of systems
available for purchase.
•Relative performance is calculated by assigning a baseline value of 1.0 to one benchmark result, and then dividing the actual
benchmark result for the baseline platform into each of the specific benchmark results of each of the other platforms, and
assigning them a relative performance number that correlates with the performance improvements reported.
•SPEC, SPECint, SPECfp, SPECrate. SPECpower, SPECjAppServer, SPECjbb, SPECjvm, SPECWeb, SPECompM, SPECompL,
SPEC MPI, SPECjEnterprise* are trademarks of the Standard Performance Evaluation Corporation. See http://www.spec.org
for more information. TPC-C, TPC-H, TPC-E are trademarks of the Transaction Processing Council. See http://www.tpc.org for
more information.
•Hyper-Threading Technology requires a computer system with a processor supporting HT Technology and an HT Technology-
enabled chipset, BIOS and operating system. Performance will vary depending on the specific hardware and software you
use. For more information including details on which processors support HT Technology, see here
•Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear
facility applications. All dates and products specified are for planning purposes only and are subject to change without notice
•Intel product plans in this presentation do not constitute Intel plan of record product roadmaps. Please contact your Intel
representative to obtain Intel’s current plan of record product roadmaps.
•INFORMATION IN THIS DOCUMENT IS PROVIDED “AS IS”. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. INTEL ASSUMES NO LIABILITY
WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO THIS INFORMATION INCLUDING
LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
•Performance tests and ratings are measured using specific computer systems and/or components and reflect the
approximate performance of Intel products as measured by those tests. Any difference in system hardware or software
design or configuration may affect actual performance. Buyers should consult other sources of information to evaluate the
performance of systems or components they are considering purchasing. For more information on performance tests and on
the performance of Intel products, reference www.intel.com/software/products.
•Copyright © 2011 Intel Corporation. All rights reserved. Intel, the Intel logo, Xeon and Intel Core are trademarks or
registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. All dates and products
specified are for planning purposes only and are subject to change without notice
3
