Intellinet 552004 User manual

8-PORT
FAST ETHERNET
OFFICE SWITCH
QUICK
INSTALL
GUIDE
Model 552004
INT-552004-QIG-0907-01

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™
8-Port Fast Ethernet Ofce Switch, Model 552004.
This device is perfect for the small and medium-size business looking
for a durable switch that is reliable and easy to install. The metal case
is more durable than a plastic enclosure, and is very appropriate for
locations with potentially harsh environments, such as a warehouse,
factory or wiring closet.
This quick install guide presents the rudimentary steps required to set
up and operate this device so you can soon enjoy the benets of these
popular features:
• 10/100 auto-sensing ports — automatically detect optimal network speeds
• Supports any combination of 10 Mbps or 100 Mbps network devices
• All RJ-45 ports with Auto-MDIX (auto uplink) support
• Supports NWay auto-negotiation
• Broadcast storm control
• Store and forward switching architecture
• Full/half duplex operation
• IEEE 802.3x ow control for full duplex
• Zero packet loss back-pressure ow control for half duplex
• Packet ltering/forwarding rates: 148,800 pps (100 Mbps), 14,880 pps
(10 Mbps)
• Supports 2048 MAC address entries
• 96 kBytes buffer memory
• LEDs for power, link/activity
• Lifetime Warranty
Package Contents
• Fast Ethernet Ofce Switch
• External power adapter
• Quick install guide
FCC Warning
This device has been tested and found to comply with limits for a Class B
digital device, pursuant to Part 2 and 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
3

when the equipment is operated in a commercial environment. This device
generates, uses and radiates radio frequency energy and, if not installed
and used in accordance with instructions, may cause interference, in which
case user will be required to correct the interference at his own expense.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may
cause radio interference, in which case the user many be required to
take adequate measures.
FRONT PANEL
REAR PANEL
There are eight RJ-45 connectors on the rear panel for connecting to
servers, workstations or other devices. Eight 10/100 Mbps switching
ports sense the 10/100 M speed and negotiate full/half duplex mode
automatically.
4
LED Status Description
POWER On Power on
Off Power off
LINK/ACT On 10/100 Mbps port is ready for connection
Off 10/100 Mbps port is experiencing a link failure
Flashing 10/100 Mbps port is receiving data
8 7 6 5 4 3 2 1

UPLINKS
The switch provides automatic crossover-detection functionality on each
port, making it easy to uplink to another switch without crossover cable.
5
8 7 6 5 4 3 2 1

SPECIFICATIONS
Standards
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3x (ow control, for full duplex mode)
General
• Media support:
- 10Base-T Cat3, 4, 5 UTP/STP RJ-45
- 100Base-TX Cat5 UTP/STP RJ-45
• Packet lter/forwarding rate:
- 148,800 pps (100 Mbps)
- 14,880 pps (10 Mbps)
• Buffer memory: 96 kBytes
• MAC address table: 2048 entries
• Switch architecture: store and forward
• Certications: FCC Class B, CE Mark
LEDs
• Power
• Link/TX
Power
• External power adapter: 7.5 V DC
• Power consumption: 3.5 Watts (maximum)
Environmental
• Metal housing
• Dimensions: 130 (L) x 77 (W) x 24 (H) mm (5.1 x 3 x 0.9 in.)
• Weight: 355 g (0.8 lbs.)
• Operating temperature: 0 – 55°C (32 – 140°F)
• Operating humidity: 10 – 90% RH, non-condensing
• Storage temperature: -20 – 90°C (-4 – 194°F)
6

Are you completely satised with this product?
Please contact your INTELLINET NETWORK SOLUTIONS™ dealer
with comments or questions.
Copyright © INTELLINET NETWORK SOLUTIONS
All products mentioned are trademarks or registered trademarks of their respective owners.
www.intellinet-network.com