Intermec CN30 AD9 User manual

What is the CN30 Charge Dock?
The CN30 Charge Dock is an accessory for the CN30 Mobile Computer. Use the dock for
serial or USB Client connectivity (to a host PC, for example) and the charger to recharge a
spare module or battery. Before using the charge dock, please read this guide thoroughly
and save it for future reference.
To use the charge dock, you need:
• a DC power supply (p/n: 851-082-XXX)
•anACpowercord.
It is important to purchase the appropriate power cord for your location. For more
information, contact your Intermec sales representative
The charge dock charges:
• 56-Key Module (p/n: VE00009-60028)
• 14-Key Module (p/n: VE00009-60029)
• Battery (p/n: VE00009-60007)
.
Attention: Vous devez utiliser la source d’alimentation Intermec adéquate avec cet
appareil sinon vous risquez d’endommager l’équipement.
The CN30 Dock supports USB 1.1 connectivity from a CN30 Mobile Computer to a USB
host. RS-232 communications is supported via the serial port.
Note: Insert module with keys facing back.
Understanding the Status Indicators
Battery Charging
You must use the appropriate Intermec power supply with this device or
equipment damage may occur.
CN30 Charge Dock Connectors
Docking
Bay Charging
Bay
Status
Indicators
Description Color
No battery or module installed. Off
Charge cycle in progress Red
Charge cycle complete. Green
The battery is not charging.
Try these solutions:
Make sure the battery or module is firmly installed in the
charger.
Make sure the power supply is connected properly to a powered
AC outlet.
Make sure the room temperature is between 5 C and 35 C (41 F
and 95 F).
Yello w
Charging

Installing the CN30 Charge Dock
Connect the DC power supply to the power connector on the charge dock. Connect the AC
power cord to an AC power outlet.
The CN30 Charge Dock is factory configured to charge a module in the charging bay. To
chargea batteryin the chargingbay,removethe modulealignment clipand insert battery.
Do not discard the module alignment clip.
Physical Dimensions
Length: 20.32 cm (8 in)
Width: 11.43 cm (4.5 in)
Electrical Specifications
Electrical rating: 12 VDC, 4A
Temperature and Humidity Specifications
Charging temperature: +5°C to +35°C (41°F to 95°F)
Operating temperature: +0°C to +50°C (32°F to 122°F)
Storage temperature: -30°C to +70°C (-22°F to 158°F)
Relative Humdity, non-condensing 5%-95%
Patent Information
Product is covered by one or more of the following
patents: 5,052,943 ,5,195,183, 5,317,691, 5,331,580, 5,544,010, 5,644,471
There may be other U.S. and foreign patents pending.
CN30 Charge Dock Quick Start Guide
*962-000-060A*
P/N: 962-000-060A
CN30 Model AD9 Charge Dock
To prevent fire or electric shock, do not expose the CN30
Charge Dock to rain or moisture.
Avertissement: Pour éviter des risques d’incendie ou de choc
électrique, ne pas exposer le CN30 Charge Dock à la plui ou
l’humidité.
Installation
Power
Connector
Module Alignment Clip
Remove to Charge Battery
Specifications
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel [phone]
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
Quick Start Guide