Intermec NORAND 6642 User manual

Charger Specifications
AC Adapter Power (18V 1.5A)
LEDs Power, Charge
Power Consumption 27W
Operating
Temperature
41°to 95°F (5–35C)
Storage Temperature -4°to 140°F
(-20–60C)
Dimensions 5.9” x 10.86”x 2.12”
(150 x 276 x 54mm)
Weight 2 lbs (917g) AC
Adapter and Charge
Unit
Battery Charge Time Battery Operating
Time
Approximately 3–5
hours Approximately 2.5 to 4
hours
WARNING: High temperatures will degrade the performance of these
batteries. Store ON Y in a cool, dry location.
Spent batteries MUST be recycled.
Contact local authorities for a nearby battery recycling program.
Intermec is a trademark of Intermec Technologies Corporation.
Copyright 2000 Intermec Technologies Corporation. All rights reserved.
PN: 962-000-012
Revision A
December 2000
*962000012*
P/N 962-000-012 Revision A
6642 EXPANSION BATTERY
CHARGER GUIDE
Packing List
Guide P/N: 962–000–012
AC Adapter/Charger P/N: 871–006–030
Charger Unit P/N: 871–008–060
AC Power Cable P/N: 871–006–050
"NOTE: This Battery Charger permits external charging of two
Intermec–labeled Lithium–Ion Battery Packs, P/N
317–106–001, rated 11.1 V 3600 mAH only.
Charger Indicator LEDs
Power Green
Charge
Orange
Flashing (80%)
Steady (90%)
Green (Fully Charged)
Error Condition Red

Setup–Connecting the AC Adapter/Charger to the
Charge Unit
1. Unpack the unit and follow the steps outlined below.
WARNING: Use only the AC Adapter P/N 871-006-030 supplied with
the 6642. Use of other AC adapters or AC adapter cords
could result in fire or equipment damage.
Battery Insertion
1. Set the battery lock to the unlocked position on the expansion battery
before inserting it into the charger.
2. Open the battery connector cover on the charging slot.
3. Slide the battery into the slot.
4. Slide the battery downward until it “snaps”in the battery charge slot.
5. Slide the battery lock to the locked position.
"NOTE: When batteries are charged at different intervals,
one battery is fully charged first, then the second
battery is charged.
Battery Removal
6. Battery removal is the reverse of installation.
7. When charging is completed, disconnect the AC adapter and the
power cord.