Intex Krystal Clear Deluxe User manual

103
CD
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
OOWWNNEERR’’SSMMAANNUUAALL
Krystal Clear™ Deluxe
Saltwater System (salt in
pool) & Filter Pump
Model 8111 (Model 8110 +
Model 51)
IMPORTANT
SAFETY RULES
Read, Understand, and Follow all
Instructions Carefully before
Installing and using this Product.
IIMMPPOORRTTAANNTT!!
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance,
Visit www.intexcorp.com
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
1-800-234-6839
Monday through Friday, 8:30am to 5:00pm Pacific Time
To find out more about additonal Intex products, please visit our website.
103CD-R1-08--
For illustrative purposes only.
2015-6332
2016-02-09

103
CD
SAVE THESE INSTRUCTIONS Page 2
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
TTAABBLLEEOOFFCCOONNTTEENNTTSS
Warnings......................................................................... 3-4
Parts List & Reference................................................... 5-10
Product Information & Specifications.......................... 11
Set Up Instructions........................................................ 12-15
Salt & Pool Water Volumes............................................ 16
Intex Pools Salt Table..................................................... 17
Intex Pools Operating Time Table................................. 18
Non-Intex Pools Salt Table............................................. 19
Non-Intex Pools Operating Time Table......................... 19
Operating Instructions................................................... 20-22
Alarm Codes & LED Code Chart.................................. 23-24
Maintenance................................................................... 25-27
Long Term Storage......................................................... 28
INTEX 3-Way Test Strips................................................ 28
Pool Maintenance and Chemical Definitions............... 29
Troubleshooting Guide.................................................. 30-32
General Aquatic Safety.................................................. 33
Limited Warranty............................................................. 34
Pool Safety Sign............................................................. 35
Intex Service Center Locations..................................... 36

103
CD
SAVE THESE INSTRUCTIONS Page 3
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
SSAAFFEETTYYRRUULLEESS
This product is for use with storable pools only. Do not use with permanently-installed
pools. A storable pool is constructed so that it is capable of being readily disassembled
for storage and reassembled to its original integrity. A permanently-installed pool is
constructed in or on the ground or in a building such that it cannot be readily
disassembled for storage.
CAUTION
WARNING
•To reduce the risk of injury, do not permit children to use this product.
Always supervise children and those with disabilities.
•Risk of electric shock. Connect this product only to a grounding type receptacle
protected by a ground-fault circuit interrupter (GFCI). Contact a qualified electrician
if you cannot verify that the receptacle is protected by a GFCI.
•Do not bury electrical cord. Locate cord where it will not be damaged by lawn
mowers, hedge trimmers, and other equipment.
•To reduce the risk of electric shock, replace damaged cord immediately. Use a
qualified electrician to replace the cord.
•To reduce the risk of electric shock, do not use extension cords, timers, plug
adaptors or converter plugs to connect unit to electric supply; provide a properly
located outlet.
•Assembly and disassembly by adults only.
•Do not attempt to plug in or unplug this product while standing in water or when
your hands are wet.
•Do not use an appliance leakage current interrupter (ALCI) in place of a GFCI
since the ALCI will not protect people.
• Position this product away from pool to prevent a child from climbing on pump to
access the pool.
•Children must stay away from this product and electrical cord(s).
•Do not operate this product when pool is occupied.
• Never use the pool if indicated chlorine level is more than 3ppm.
•Always unplug this product from the electrical outlet before removing, cleaning,
servicing or making any adjustment to the product.
• This product is intended to be used only for the purposes described in the manual!
• Operating this product without water flowing through the system can cause a build
up of flammable gases which can result in FIRE OR EXPLOSION.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN
PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR
OTHER SERIOUS INJURY OR DEATH.
These product warnings, instructions and safety rules provided with the product represent
some common risks of water recreation devices and do not cover all instances of risk and
danger. Please use common sense and good judgement when enjoying any water activity.
Follow all aspects of the local and National Electrical Code(s) when installing the Krystal
Clear™ Deluxe Saltwater System (salt in pool) & Filter Pump Model 8111.
IMPORTANT SAFETY RULES
Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.
READ AND FOLLOW ALL INSTRUCTIONS

103
CD
SAVE THESE INSTRUCTIONS Page 4
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN
POOL) & FILTER PUMP MODEL 8111
110 – 120 V~, 60 Hz, 2.5 A
THERMALLY PROTECTED
WEATHERPROOF ENCLOSURE
CSA ENCLOSURE 3
DOUBLE INSULATED AND GROUNDED
FOR USE WITH SWIMMING POOLS ONLY.
CAUTION
FOR CONTINUED PROTECTION AGAINST POSSIBLE ELECTRIC SHOCK,
USE ONLY IDENTICAL REPLACEMENT PARTS WHEN SERVICING.
IMPORTANT
READ THE LABEL AND OWNER’S MANUAL BEFORE USING.
KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN
POOL) & FILTER PUMP MODEL 8111
CONTROLS BACTERIA AND ALGAE in Storable Swimming pool Waters.
Domestic.
A Maximum of 55,000 L (14,530 gal) of water can be treated with one Krystal Clear™ Deluxe
Saltwater System (salt in pool) & Filter Pump Model 8111.
Maximum output of hypochlorous acid equivalent to 0.225 kg (0.495 lb) of free available
chlorine per day.
For swimming pools, a minimum of 1 ppm of free available chlorine must be maintained.
READ THE LABEL AND OPERATING MANUAL BEFORE USING.
KEEP OUT OF REACH OF CHILDREN.
REGISTRATION NO. 28191 PEST CONTROL PRODUCTS ACT.
Registrant: Intex Trading (Hong Kong) Ltd., 9th floor Dah Sing Financial Center, 108
Gloucester Road, Wanchai, Hong Kong
Canadian Agent: The Canadian Group, 430 Signet Drive Suite A, Toronto, Ontario M9L2T6,
Canada 1-800-234-6839 WARNING
Operating Krystal Clear™ Deluxe Saltwater System (salt in pool) & Filter Pump
Model 8111 without water flow through the cell can cause a build up of flammable
gases which can result in FIRE OR EXPLOSION.
WARNING
RISK OF ELECTRIC SHOCK.
CONNECT ONLY TO GROUNDING TYPE RECEPTACLE PROTECTED BY A CLASS
A GROUND FAULT CIRCUIT INTERRUPTER (GFCI).
LED DEFINITIONS
88 Start-up
90 Low Water Flow / No Flow
91 Low Salt Level
92 High Salt Level
93 Operating Process Finished

103
CD
SAVE THESE INSTRUCTIONS Page 5
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
PPAARRTTSSLLIISSTT
PARTS LIST
NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.
7
1
9
4 5
2
6
3
8
10 11 12
13 14 15

103
CD
SAVE THESE INSTRUCTIONS Page 6
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
16 17 18
19 20 21
22 23 24
25 26 27
28 29 30
PARTS LIST (continued)
PPAARRTTSSLLIISSTT
NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.
* Optional * Optional * Optional
* Optional

103
CD
SAVE THESE INSTRUCTIONS Page 7
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
PPAARRTTSSRREEFFEERREENNCCEE
PARTS REFERENCE
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to
scale.
1
23
4
5
68
7
1
2
10
9
812 13 14 15 16 17
18
11
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for Class B
digital device, pursuant to part 15 of the FCC Rules.These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.

103
CD
SAVE THESE INSTRUCTIONS Page 8
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
REF. NO. DESCRIPTION QTY. SPARE PART
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2
2
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
AIR RELEASE VALVE/SEDIMENT RELEASE VALVE
VALVE O-RING
THREADED FILTER HOUSING COLLAR
FILTER HOUSING COVER
FILTER HOUSING O-RING
FILTER CARTRIDGE (59905)
AIR RELEASE VALVE B (WITH O-RING)
PUMP HOSE WITH NUTS
WATER TRANSFER HOSE (WITH COLLAR AND 2 HOSE CLAMPS)
SCREW
FLOW SENSOR
O-RING A
ELECTROLYTIC CELL WITH 2 SCREWS (O-RING A INCLUDED)
O-RING B
FLOW SENSOR CONDUIT (O-RING B & C INCLUDED)
O-RING C
ANGLE JOINT (O-RING D INCLUDED)
O-RING D
10460
10264
10491
10490
10492
10725
10493
10726
10713
11143
10712
10888
10715
10887
10717
10724
10743
PARTS REFERENCE (continued)
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
PPAARRTTSSRREEFFEERREENNCCEE

103
CD
SAVE THESE INSTRUCTIONS Page 9
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
PPAARRTTSSRREEFFEERREENNCCEE
PARTS REFERENCE (continued)
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.
19
20
21 22 23 24 25
19
20
21 27 28 29
19
20
21 22 23 24 26
19
20
21 27 28 30

103
CD
SAVE THESE INSTRUCTIONS Page 10
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
SPARE PART
NO.
10747 10262 10745 10256
10255
10744
11074
10253 10722
11070 11071
11072
QTY.
2 2 2 2 1 1
2
2 1 1
DESCRIPTION
PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED)
HOSE O-RING
STEP WASHER
STRAINER NUT
FLAT STRAINER RUBBER WASHER
THREADED STRAINER CONNECTOR
ADJUSTABLE POOL INLET NOZZLE STRAINER GRID
ADAPTOR B (OPTIONAL)
STRAINER CONNECTOR (OPTIONAL) POOL INLET NOZZLE (OPTIONAL) STRAINER GRID (OPTIONAL)
REF. NO.
COMMON
19 20
21
LARGE AGP
22
23 24
25 26
SMALL AGP
27 28 29
30
PPAARRTTSSRREEFFEERREENNCCEE

103
CD
SAVE THESE INSTRUCTIONS Page 11
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
PPRROODDUUCCTTIINNFFOORRMMAATTIIOONN//SSPPEECCSS
Common salt (sodium chloride) is made up of two elements, sodium and
chlorine. During the installation of your Saltwater System/Filter Pump, a
measured quantity of salt is dissolved in the pool water to make it slightly
salty.This pool water is passed through the saltwater system’s electrolytic
cell to produce HOCL which is dissolved instantly in the water.The HOCL
instantly starts to destroy bacteria, algae and oxidizes other organic
materials.
Key Saltwater System Parts:
•Power Supply
The power supply converts AC electrical current to a low voltage DC current.This
is required by the cell to perform the electrolysis that creates chlorine.
•Electrolytic Cell (with Titanium Plates)
The electrolytic cell contains bipolar titanium electrodes which perform the
electrolysis and produce liquid sanitizer (HOCL) when energized with DC
electricity. Sanitizer is generated when pool water containing salt passes through
the cell.The sanitizer production can be varied by changing the number of hours
the saltwater system is operating each day.The saltwater system has a built-in
self cleaning cycle that operates every twenty hours without interrupting sanitizer
production.
•Flow Sensor
The flow sensor protects the electrolytic cell and ensures there is adequate water
flowing through the cell.When the water flow drops below minimum flow rate, the
electrolytic cell will automatically shut down to protect the titanium plates. A safety
buzzer will sound and the LED display panel will show a signal code (see “LED
Code Chart”) indicating the problem.
•Electronic Control Station
The electronic control station contains an LED display panel and a set of
pushbuttons to program the saltwater system operating hours. It also monitors the
different parameters such as salt level, water flow and the electrolytic cell activity.
If any deviation from the norm occurs then a buzzer will sound and the LED
display panel will show a signal code (see “LED Code Chart”) indicating the
problem.
PRODUCT SPECIFICATIONS
Power: 110 - 120 Volt
Amperage: Saltwater System - 2.5 A; Filter Pump - 2.6 A
Wattage: Saltwater System - 250 W; Filter Pump - 280 W
Ideal Salt Level: 3000 ppm (parts per million)
Maximum Sanitizer Output/hour: 24 grams/hour
Limited Warranty: 2 Years (see “Limited Warranty”)
HOW SANITIZER IS GENERATED
Water Outlet
Water Inlet
Flow Sensor
Electronic Control
Station
Electrolytic Cell
(with Titanium
Plates)

103
CD
SAVE THESE INSTRUCTIONS Page 12
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
SSEETT--UUPPIINNSSTTRRUUCCTTIIOONNSS
STRAINER & PLUNGER VALVE SET-UP
Strainer & Plunger Valve Set Up (small AGP)
The strainer grid prevents large objects from jamming and/or damaging the
filter pump and the plunger valve assembly prevents water from flowing into
the filter pump while the filter cartridge is being placed or cleaned. If your
pool has inflatable top ring, install the strainer, nozzle and plunger valve
before inflating the pool liner top ring.
1. Grasp the strainer and plunger valve mechanism.
2. In a counter-clockwise motion unscrew plunger valve union from the threaded
strainer connector (24). Be careful not to lose the step rubber washer (21).
3. Grasp the plunger valve assembly. Make sure the step washer (21) is in place.
Connect adaptor B (27) to plunger valve union.
4. Repeat steps 1 through 3 for nozzle and plunger valve mechanism.
5. Remove wall plug and then insert the strainer (28 & 30) into the lower position
of protruding hose connection, and the nozzle (28 & 29) into the upper position
of protruding hose connection. Adaptor B (27) fits over the strainer
connection (28) inserted into the connection.
6. Examine the plunger valve to see if the handle is pushed fully down to the "0/1"
position. If not, then grasp the handle at the top and push down turning the
handle in a clockwise direction until the plastic protruding notch anchor is in
the "0/1" position.This will prevent water from flowing out during filling.
7. The pool liner is now ready to fill with water. Consult the above-ground-pool
owner's manual for filling instructions.
IMPORTANT
The Saltwater System/Filter Pump must be installed as the last piece of
pool equipment in the water return line to the pool.This location extends
the life of the titanium plates.
19
20
21 27 28 29
19
20
21 27 28 30

103
CD
SAVE THESE INSTRUCTIONS Page 13
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
SSEETT--UUPPIINNSSTTRRUUCCTTIIOONNSS
Strainer & Plunger Valve Set Up (large AGP)
The strainer grid prevents large objects from jamming and/or damaging the
filter pump and the plunger valve assembly prevents water from flowing into
the filter pump while the filter cartridge is being placed or cleaned. If your
pool has inflatable top ring, install the strainer, nozzle and plunger valve
before inflating the pool liner top ring.
STRAINER & PLUNGER VALVE SET-UP (continued)
1. Grasp the strainer and plunger valve
mechanism.
2. In a counter-clockwise motion unscrew
plunger valve union from the threaded
strainer connector (24). Be careful not to
lose the step rubber washer (21). Place the
plunger valve on the ground in a safe
place (see drawing 1).
3. In a counter-clockwise motion unscrew the
strainer nut (22) from the threaded
connector (24). Leave the flat washer (23)
on the connector (24).
4. Install the strainer and plunger valve at the
lower position of pool outlet (marked "+").
From the inside of the pool liner insert the
connector (24) into one of the pre-cut holes
with the washer remaining on the
connector to be placed against the inside
of the liner wall.
5. With the flat side of the strainer nut (22)
facing the outside wall of the liner in a
clockwise motion screw the strainer
nut (22) back onto the threaded
connector (24) (see drawing 2). Before
assembly, lubricate the threads with a
petroleum jelly.
6. Finger tighten the strainer grid (26) and the
strainer nut (22) onto the threaded
connector (24).
7. Grasp the plunger valve assembly. Make
sure the step washer (21) is in place.
8. In a clockwise motion screw the plunger
valve union back onto the threaded
connector (24) (see drawing 3).
9. Examine the plunger valve to see if the
handle is pushed fully down to the "0/1"
position. If not, then grasp the handle at
the top and push down turning the handle
in a clockwise direction until the plastic
protruding notch anchors in the "0/1"
position.This will prevent water from
flowing out during filling (see
drawings 4.1 & 4.2).
1
2
3
4.1
4.2
23 24 26
INSIDE
LINER WALL
INSIDE
LINER
WALL
22
2
1
1
2
1
2

103
CD
SAVE THESE INSTRUCTIONS Page 14
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
SSEETT--UUPPIINNSSTTRRUUCCTTIIOONNSS
NOZZLE & PLUNGER VALVE SET-UP
1. Grasp the nozzle and plunger valve
mechanism.
2. In a counter-clockwise motion unscrew
plunger valve union from the threaded
strainer connector (24). Be careful not to
lose the step rubber washer (21). Place the
plunger valve on the ground in a safe
place (see drawing 5).
3. In a counter-clockwise motion unscrew the
strainer nut (22) from the threaded
connector (24). Leave the flat washer (23)
on the connector (24).
4. Install the nozzle and plunger valve at the
upper position of pool inlet. From the inside
of the pool liner insert the connector (24)
into one of the pre-cut holes with the
washer remaining on the connector to be
placed against the inside of the liner wall.
5. With the flat side of the strainer nut (22)
facing the outside wall of the liner in a
clockwise motion screw the strainer
nut (22) back onto the threaded
connector (24) (see drawing 6). Before
assembly, lubricate the threads with a
petroleum jelly.
6. Finger tighten the adjustable pool inlet
nozzle (25) and the strainer nut (22) onto
the threaded connector (24).
7. Grasp the plunger valve assembly. Make
sure the step washer (21) is in place.
8. In a clockwise motion screw the plunger
valve union back onto the threaded
connector (24) (see drawing 7).
9. Examine the plunger valve to see if the
handle is pushed fully down to the "0/1"
position. If not, then grasp the handle at
the top and push down turning the handle
in a clockwise direction until the plastic
protruding notch anchors in the "0/1"
position.This will prevent water from
flowing out during filling (see
drawings 8.1 & 8.2).
10. Adjust the direction of nozzle head pointing
away from the pool outlet for a better
circulation result (see drawing 9).
11. The pool liner is now ready to fill with
water. Consult the above-ground-pool
owner’s manual for filling instructions.
5
7
8.1
8.2
INSIDE
LINER
WALL
POOL
9
2
1
1
2
1
2
6
23 24 25
INSIDE
LINER WALL
22
WATER
FLOW

103
CD
SAVE THESE INSTRUCTIONS Page 15
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
SSEETT--UUPPIINNSSTTRRUUCCTTIIOONNSS
SALTWATER SYSTEM/FILTER PUMP
Saltwater System/Filter Pump
1. Remove the Saltwater System/Filter Pump and hoses from the packaging.
2. Place the Saltwater System/Filter Pump in a location for hose (8) connections to
the plunger valve assemblies.
NOTE: Some regional regulations may require the filter pump to be
mounted on a stationary platform.There are two mounting holes located in
the pump base for this reason. Consult your local authorities for filter
pump mounting requirements.
3. Grasp the two pump hoses (8) and connect the hose nuts to the Saltwater
System/Filter Pump.
4. In a counter-clockwise motion unscrew the threaded filter housing collar (3) from
the filter housing. Place it in a safe place.
5. The Saltwater System/Filter Pump is an airtight system. In a counter-clockwise
motion turn both air release valves (1 & 7) 1 - 2 turns to open. DO NOT remove
air release valves as water will expel with force if the motor is turned on
and injury may occur.
6. Grasp and remove the filter housing cover (4). Check to see if a cartridge is
inside the housing. If yes, replace the cover, finger tighten the housing collar (3)
back onto the filter housing.
7. Gently finger tighten the sediment release valve located at the bottom of the
housing to be sure that water does not leak out.
8. When the pool is filled connect the hose from the electrolytic cell outlet to the
highest strainer assembly. The hose connection is made at the bottom of the
plunger valve assembly. Use the hose nut to attach the hose.
9. Connect the 2nd hose to the middle of the motor housing and to the remaining
liner connection.
IMPORTANT
To prevent air lock, open the lower plunger valve (connected inlet hose)
first and then the upper plunger valve (connected outlet hose). Open air
release valves, lift and lower the inlet hose until water starts to flow out of
the air release valves, close air release valves.

103
CD
SAVE THESE INSTRUCTIONS Page 16
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
SSAALLTT&&PPOOOOLLWWAATTEERRVVOOLLUUMMEESS
SALT & POOL WATER VOLUMES
Use only Sodium Chloride Salts
Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also
acceptable to use water conditioning salt pellets (the compressed forms of
evaporated salt), but it will take longer for them to dissolve. Do not use iodized or
yellow (yellow prussiate of soda) colored salt. Salt is added to the pool water
and the electrolytic cell uses this salt to create the sanitizer.The purer the salt the
better the performance of the electrolytic cell.
Optimum Salt Levels
The ideal salt level in the pool water is between 2500-3500 ppm (parts per million)
with 3000 ppm being optimal.
A too low salt level will reduce the efficiency of the saltwater system and result in
low sanitizer production. A high salt level may begin to generate a salty taste to
your pool water (this may occur at a salt level above 3500-4000 ppm).Too high of a
salt level may damage the power supply and cause corrosion to pool metal fixtures
and accessories.The following “salt table” shows the quantity of salt to use.The
salt in the pool is constantly recycled. Salt loss occurs only when pool water is
physically removed from the pool. Salt is not lost due to evaporation.
How to Add or Remove Salt
Adding Salt
1. Depress the ON button on the filter pump switch to circulate pool water.
2. Keep the saltwater system “OFF”.
3. Determine the amount of salt to be added (see “Salt Table”).
4. Evenly spread the proper amount of salt around the inside perimeter of the pool.
5. To avoid clogging the filter, do not add salt through the skimmer.
6. Brush the pool bottom to speed up the dissolving process. Do not allow salt to
pile up on the bottom of the pool. Run the filter pump 24 consecutive hours to
thoroughly dissolve the salt.
7. After 24 hours and if all the salt is dissolved, turn on the saltwater system and
set the saltwater system to desired operating time (see “Operating Time Table”).
Removing Salt
If too much salt has been added, the unit will beep and display “code 92” (see
“Alarm Codes”).You need to lower the salt concentration.The only way to lower the
salt concentration is to partially drain the pool and refill with fresh water. Drain and
refill approximately 20% of the pool’s water until the “Code 92” disappears.
Pool Volume Calculation
Rectangular Length x Width x Average Depth x 7.5 Length x Width x Average Depth
Circular Length x Width x Average Depth x 5.9 Length x Width x Average Depth x 0.79
Oval Length x Width x Average Depth x 6.0 Length x Width x Average Depth x 0.80
Types of Pool Gallons
(pool size in feet) Cubic Meters
(pool size in meters)

103
CD
SAVE THESE INSTRUCTIONS Page 17
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
INTEX POOLS SALT TABLE
This table shows how much salt to use to achieve the desired 3000 ppm salt level and how much
will be needed to maintain this level if it drops below this desired level.
Pool Size
Water Capacity ( Calculated at
90% for Frame Pool and 80%
for Easy Set & Oval Pool)
Salt Needed for
Startup
3.0g/L (3000 ppm)
Salt Needed when
Low Salt Detected
(CODE “91”)
(Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs)
INTEX ABOVE GROUND POOLS (AGP’s)
EASY SET®
POOL
CIRCULAR
METAL
FRAME POOL
ULTRA FRAME
POOL
SEQUOIA SPIRIT™
POOL SET
OVAL FRAME
POOL
RECT. ULTRA
FRAME POOL
457cm x 91cm (15' x 36")
457cm x 107cm (15' x 42")
457cm x 122cm (15' x 48")
488cm x 107cm (16' x 42")
488cm x 122cm (16' x 48")
549cm x 107cm (18' x 42")
549cm x 122cm (18' x 48")
549cm x 132cm (18' x 52")
457cm x 91cm (15' x 36")
457cm x 107cm (15' x 42")
457cm x 122cm (15' x 48")
488cm x 122cm (16' x 48")
488cm x 132cm (16' x 52")
549cm x 122cm (18' x 48")
549cm x 132cm (18' x 52")
732cm x 122cm (24' x 48")
732cm x 132cm (24' x 52")
488cm x 122cm (16' x 48")
549cm x 132cm (18' x 52")
508cm x 124cm (16'8" x 49")
549cm x 135cm (18'8" x 53")
549cm x 305cm x 107cm (18' x 10' x 42")
610cm x 366cm x 122cm (20' x 12' x 48")
732cm x 366cm x 122cm (24' x 12' x 48")
853cm x 366cm x 122cm (28' x 12' x 48")
549cm x 274cm x 132cm (18' x 9' x 52")
732cm x 366cm x 132cm (24' x 12' x 52")
975cm x 488cm x 132cm (32' x 16' x 52")
2822 10681 65 30 20 10
3284 12430 80 35 20 10
3736 14141 95 45 20 10
3754 14209 95 45 20 10
4273 16173 110 50 30 15
4786 18115 120 55 30 15
5455 20647 135 60 30 15
5894 22309 150 65 40 20
3282 12422 80 35 20 10
3861 14614 100 45 20 10
4440 16805 110 50 30 15
5061 19156 125 55 30 15
5501 20821 135 60 30 15
6423 24311 160 75 40 20
6981 26423 175 80 40 20
11483 43462 290 130 75 35
12481 47241 310 140 85 40
5061 19156 125 55 30 15
6981 26423 175 80 40 20
5061 19156 125 55 30 15
6981 26423 175 80 40 20
2885 10920 75 35 20 10
4393 16628 110 50 30 15
5407 20465 132 60 35 15
6420 24300 150 70 40 20
4545 17203 115 50 30 15
8403 31805 210 95 60 30
14364 54368 365 165 95 45

103
CD
SAVE THESE INSTRUCTIONS Page 18
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
INTEX POOLS OPERATING TIME TABLE
This table shows the operating time required for normal use of the Saltwater System with above ground pools.
Pool Size
Water Capacity ( Calculated at
90% for Frame Pool and 80%
for Easy Set & Oval Pool)
Operating Time (hours)
at different ambient/air
temperatures
(Gals) (Liters)
10 - 19°C
(50 - 66°F) 20 - 28°C
(68 - 82°F) 29 - 36°C (84 - 97°F) 37- 42°C (99 - 108°F)
INTEX ABOVE GROUND POOLS (AGP’s)
EASY SET®
POOL
CIRCULAR
METAL
FRAME POOL
ULTRA FRAME
POOL
SEQUOIA SPIRIT™
POOL SET
OVAL FRAME
POOL
RECT. ULTRA
FRAME POOL
457cm x 91cm (15' x 36")
457cm x 107cm (15' x 42")
457cm x 122cm (15' x 48")
488cm x 107cm (16' x 42")
488cm x 122cm (16' x 48")
549cm x 107cm (18' x 42")
549cm x 122cm (18' x 48")
549cm x 132cm (18' x 52")
457cm x 91cm (15' x 36")
457cm x 107cm (15' x 42")
457cm x 122cm (15' x 48")
488cm x 122cm (16' x 48")
488cm x 132cm (16' x 52")
549cm x 122cm (18' x 48")
549cm x 132cm (18' x 52")
732cm x 122cm (24' x 48")
732cm x 132cm (24' x 52")
488cm x 122cm (16' x 48")
549cm x 132cm (18' x 52")
508cm x 124cm (16'8" x 49")
549cm x 135cm (18'8" x 53")
549cm x 305cm x 107cm (18' x 10' x 42")
610cm x 366cm x 122cm (20' x 12' x 48")
610cm x 366cm x 132cm (20' x 12' x 52")
732cm x 366cm x 122cm (24' x 12' x 48")
732cm x 366cm x 132cm (24' x 12' x 52")
853cm x 366cm x 122cm (28' x 12' x 48")
853cm x 366cm x 132cm (28' x 12' x 52")
975cm x 366cm x 122cm (32' x 12' x 48")
1,219cm x 366cm x 122cm (40' x 12' x 48")
549cm x 274cm x 132cm (18' x 9' x 52")
732cm x 366cm x 122cm (24' x 12' x 48")
732cm x 366cm x 132cm (24' x 12' x 52")
975cm x 488cm x 132cm (32' x 16' x 52")
2822
3284
3736
3754
4273
4786
5455
5894
3282
3861
4440
5061
5501
6423
6981
11483
12481
5061
6981
5061
6981
2885
4393
4738
5407
5832
6420
6925
7434
9461
4545
7757
8403
14364
10681
12430
14141
14209
16173
18115
20647
22309
12422
14614
16805
19156
20821
24311
26423
43462
47241
19156
26423
19156
26423
10920
16628
17935
20465
22073
24300
26211
28137
35809
17203
29359
31805
54368
1
1
2
2
2
3
3
3
1
2
3
3
3
4
4
7
8
3
4
3
4
1
2
3
3
3
4
4
5
6
3
5
5
9
3
3
3
3
3
4
4
5
3
3
3
4
4
5
5
9
10
4
5
4
5
3
4
4
4
5
5
5
6
8
4
6
6
11
3
3
3
3
3
5
5
6
3
3
3
5
5
6
6
10
11
5
6
5
6
3
5
5
5
6
6
6
7
9
5
7
7
12
3
3
3
3
4
6
6
7
3
3
4
6
6
7
7
11
12
6
7
6
7
3
6
6
6
7
7
7
8
10
6
8
8
12

103
CD
SAVE THESE INSTRUCTIONS Page 19
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
NON-INTEX POOLS
Non-Intex Pools Operating Time Table
Non-Intex Pools Salt Table
Salt Calculation for Pools
Water Capacity ( Calculated at 90% for
Frame Pool and 80% for Easy Set &
Oval Pool)
Salt Needed for Startup Salt Needed when
Low Salt Detected
(CODE “91”)
(Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs)
Salt Needed for Startup
(Lbs) Salt Needed for Startup (Kgs) Salt Needed when Low Salt Detected (Lbs) Salt Needed when Low Salt Detected (Kgs)
Water Capacity (Gals) x
0.025 Water Capacity (Liters) x 0.003 Water Capacity (Gals) x 0.0067 Water Capacity (Liters) x 0.0008
2000 7500 50 20 10 5
4000 15000 100 45 25 10
6000 22500 150 65 40 20
8000 30000 200 90 55 25
10000 37500 250 110 70 30
12000 45500 300 135 80 35
14000 53000 350 160 95 45
Water Capacity Operating Time (hours)
at different ambient/air temperatures
(Gals) (Liters) 10 - 19°C
(50 - 66°F) 20 - 28°C
(68 - 82°F) 29 - 36°C (84 - 97°F) 37 - 42°C (99 - 108°F)
2000
4000
6000
8000
10000
12000
14000
7500
15000
22500
30000
37500
45500
53000
2
3
5
6
8
10
11
2
3
6
7
9
11
12
3
3
7
8
10
12
12
1
2
4
5
6
9
10

103
CD
SAVE THESE INSTRUCTIONS Page 20
(103CD) MODEL 8111 (MODEL 8110 + MODEL 51) DELUXE SALTWATER SYSTEM (SALT IN POOL) & FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U
12/25/2007
OOPPEERRAATTIINNGGIINNSSTTRRUUCCTTIIOONNSS
FILTER PUMP OPERATION
1. Make sure the unit switch is "OFF".The switch is located on the control station.
2. Connect the power cord to a GFCI protected electrical outlet.
3. Grasp a plunger valve handle.Turn the handle counter-clockwise, pull up until it
stops, and then turn it clockwise until the metal protruding notch anchor is in
the "0/1" position. Repeat for the 2nd plunger valve.This opens the valves to
allow water to flow into the unit.
4. With water flowing into unit, the water pressure will allow the air trapped inside
to escape from the air release valves (1 & 7).When all the air has escaped
water will flow out of the valves (1 & 7).When this occurs gently finger tighten
the valves in a clockwise direction.
5. Turn the switch "ON".The filter pump is now filtering the water.
6. A yellow LED Light on the control panel will light up, that indicates the filter
pump is running.
To prevent air lock, open the lower plunger valve (connected inlet hose)
first and then the upper plunger valve (connected outlet hose). Open air
release valves, lift and lower the inlet hose until water starts to flow out of
the air release valves, close air release valves.
IMPORTANT
Risk of electric shock. Connect this product only to a grounding type
receptacle protected by a ground-fault circuit interrupter (GFCI). Contact a
qualified electrician if you cannot verify that the receptacle is protected by
a GFCI.
WARNING
1
7