INVENTOR CF-ION-10L User manual
• USER’S MANUAL
• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ
• MANUAL UTILIZATORULUI
ENGLISH | ΕΛΛΗΝΙΚΑ | ROMANA
MODELS:
CF-ION-10L
CF-ION-12L
DEHUMIDIFIER
LANGUAGES
ENGLISH ........................................................................................................3
....................................................................................................30
ROMANA .....................................................................................................57
4EN
TABLE OF CONTENTS
1. SAFETY & WARNING INSTRUCTIONS............................................................................ 5
2. ELECTRICAL INFORMATION .......................................................................................... 6
3. SOCIABLE REMARKS ENVIRONMENTAL PROTECTION................................................ 6
4. SAFETY PRECAUTIONS................................................................................................... 7
5. WARNINGS (for using R290 refrigerant only) ........................................................... 10
6. STEPS BEFORE USE ....................................................................................................... 16
7. GETTING TO KNOW YOUR DEHUMIDIFIER................................................................. 18
8. CONTROL PANEL • FUNCTIONS .................................................................................. 19
9. WATER TANK & DRAIN HOSE....................................................................................... 23
10. MAINTENANCE & CLEANING..................................................................................... 25
11. STORAGE..................................................................................................................... 26
12. FREQUENTLY ASKED QUESTIONS & TROUBLESHOOTING ..................................... 26
Dear Consumer,
Congratulations on your choice!
ensures both dehumidifying and purifying capabilities
thankstothe function oftheIonizer.WithComfortseries
Please read all the safety instructions carefully before use
and keep this instruction manual for future reference.
5
EN
!
1. SAFETY & WARNING INSTRUCTIONS
l
l
l
commercial, industrial or marine use, and in areas with wet surfaces such as restrooms or
shower rooms.
l
l
l
l
safely be transferred from one area to another.
l
used for a prolonged time.
lAlways empty the water tank before storing the unit.
l
reasons, there is a 3 minute delay in order to regain normal operation.
lIf the unit is misplaced or tipped, unplug the power cord immediately. Make sure the unit
is completely dry before resuming operation.
l
l
lDo not attempt to repair, dismantle or modify this appliance. Contact your authorized
l
l
l
l
arranged away from areas where accidental tripping may occur.
l
any water collected in the bucket.
l
lDo not place the unit in direct sunlight or near other heating sources.
l
l
l
performance.
lDo not drink or use the collected water of the unit for any purpose.
lDo not use the unit with wet hands.
6EN
for 24 hours.
2. ELECTRICAL INFORMATION
The nameplate, with all the electrical and technical data of this appliance, is located on the
rear panel.
lThe appliance should be installed in accordance with national wiring regulations.
l
plug for protection against electric shock hazards.
l
l
l
to a multiple socket outlet, which is also being used for other electrical appliances.
l
maintenance.
l
3. SOCIABLE REMARKS
ENVIRONMENTAL PROTECTION
lThis appliance requires special treatment for disposal. In the European Union, electronic
equipment must not be treated as domestic waste, but must be disposed of professionally in
2003 concerning old electrical and electronic equipment.
The disposal of this unit should follow all legal requirements and should not be disposed as
unsorted municipal waste.
The hazardous substances can leak into the ground water supply thus entering the food chain,
lFluorinated Greenhouse Gasses are contained in hermetically sealed equipment. For
2
l
waste.
EN
4. SAFETY PRECAUTIONS
Read Safety Precautions before operation and installation
must be followed. Incorrect operation due to ignoring of instructions may cause harm or
damage.
l
!WARNING This symbol indicates the possibility of death or serious injury.
CAUTION
This symbol indicates the possibility of injury or damage to property
or serious consequences.
lMeanings of symbols used in this manual are as shown below.
!Always do this.
!WARNING
Do not exceed the rating of the power outlet or connection device.
Do not operate or stop the unit by switching on or o the power supply.
Do not damage the power cord or use an unspecied power cord.
Do not modify power cord length or share the outlet with other appliances
Do not insert or pull out plug with wet hands.
It may cause electric shock.
Do not place the unit near a heat source.
!Disconnect the power if strange sounds, smell, or smoke comes from it.
You should never try to take apart or repair the unit by yourself.
It may cause failure of machine or electric shock.
! Before cleaning, turn o the power and unplug the unit.
It may cause electrical shock or injury.
Do not use the machine near flammable gas or combustibles, such as gasoline,
benzene, thinner, etc.
Do not drink or use the water drained from the unit.
It contains contaminants and could make you sick.
Do not take the water bucket out during operation.
Do not use extension cords.
8EN
!CAUTION
Do not use the unit in small spaces
Do not place the device in areas where water may splash onto the unit.
! Place the unit on a leveled and sturdy section of the oor.
Do not cover the air intake or exhaust openings.
!Care should be taken when using the unit in a room with the following persons:
Do not use in areas where chemicals are handled.
Never insert your nger or other objects into grills or openings. Take special care to
warn children of these dangers.
It may cause electric shock or failure of appliance.
Do not place heavy object on the power cord and take care so that the cord is not
compressed.
Do not climb or sit on the unit.
! Always insert the air lters securely. Clean the air lters at least once every two weeks.
! If water enters the unit, turn the unit o and disconnect the power, contact a qualied
service technician.
Do not place ower vases or other water containers on top of the unit.
!CAUTION
• The appliance shall be installed in accordance with national wiring regulations.
materials.
• Do not use the socket if it is loose or damaged.
• Do not operate your appliance in a wet room such as a bathroom or laundry room.
EN
• Do not use this product for functions other than those described in this instruction manual
• Contact the authorised installer for installation of this unit.
lightning.
• Do not open the unit during operation.
• Do not operate the unit with damaged cord. Dispose the unit or return it to an authorized
• Hold the plug by the head of the power plug when taking it out.
l Electrical Information
• The manufactures nameplate is located on the rear or side panel of the unit and contains
is important. The power cord is equipped with a three-prong grounding plug for protection
against shock hazards.
you intend to use is not adequately grounded or protected by a time delay fuse or circuit
electrician install the proper receptacle.
• Ensure the receptacle is accessible after the unit installation.
• All wirings must be performed strictly in accordance with the wiring diagram located on the
l
NOTE:
same.
10 EN
5. WARNINGS (for using R290 refrigerant only)
process or to perform a cleaning of the unit, other than those recommended by the
manufacturer.
- Do not attempt to penetrate the unit with a tool or try to burn
4m2.
- It is necessary to always comply with national gas regulations.
from occurring.
handle refrigerants, safely, and in accordance to the safety standards of the industry.
reccomendations. Any maintenance or repair required, should be performed by skilled
carefully prior to installing and operating your
for future reference.
11
EN
WARNING
CAUTION This symbol indicates that the user’s manual should be read carefully.
CAUTION
handle this unit with reference to the user’s manual
CAUTION This symbol indicates the presence of a user’s or installation manual
!Warnings (for using R290 refrigerant)
Determined by local regulations.
2. Marking of equipment using signs
See local regulations
See National Regulations.
4. Storage of equipment/appliances
The storage of equipment should be in accordance with the manufacturer’s instructions.
5. Storage of packed (unsold) equipment
Storage package protection should be constructed such that mechanical damage to the
equipment inside the package will not cause a leak of the refrigerant charge.
determined by local regulations.
1. Checks to the area
necessary to ensure that the risk of ignition is minimized. For repair to the refrigerating system,
the following precautions shall be complied with prior to conducting work in the system.
2. Work procedure
Work shall be undertaken under a controlled procedure so as to minimize the risk of a
3. General work area
4. Checking for presence of refrigerant
The area shall be checked with an appropriate refrigerant detector prior to and during work,
nonspeaking, adequately sealed or intrinsically safe.
If any work is to be conducted on the refrigeration equipment or amy associated parts,
12 EN
CO2
6. No ignition sources
to the surrounding space. Prior to work taking place, the area around the equipment is to be
shall be displayed.
8. Checks to the refrigeration equipment
be followed. If in doubt consult the manufacturer’s technical department for assistance.
--the charge size is in accordance with the room size within which the refrigerant containing parts
are installed;
--If an indirect refrigerating circuit is being used, the secondary circuit shall be checked for the
Markings and signs that are unrecognizable must be corrected;
--Refrigeration pipe or components are installed in a position where they are unlikely to be
components are constructed of materials which are inherently resistant to being corroded or
are suitably protected against being so corroded.
Repair and maintenance to electrical components shall include initial safety checks and component
shall be connected to the circuit until it is satisfactorily dealt with. If the fault cannot be corrected
immediately but it is necessary to continue operation, an adequate temporary solution shall be
purging the system;
--that there is continuity of earth bonding.
7. Repairs to sealed components
During repairs to sealed components, all electrical supplies shall be disconnected from the
operating form of leak detection shall be located at the most critical point to warn of a
potentially hazardous situation.
Particular attention shall be paid to the following to ensure that by working in electrical
13
EN
NOTE
8. Repair to intrinsically safe components
presence of a flammable atmosphere. The test apparatus shall be at the correct rating.
in the ignition of refrigerant in the atmosphere from a leak.
9. Cabling
shall not be used
Under no circumstances shall potential sources of ignition be used in the searching for or
not be used.
11. Leak detection methods
The following leak detection methods are deemed acceptable for systems containing
suitable for the refrigerant used. Leak detection equipment shall be set at a percentage of the
LFL of the refrigerant and shall be calibrated to the refrigerant employed and the appropriate
with the refrigerant and corrode the copper pipe work.
If a leakage of refrigerant is found which requires brazing, all of the refrigerant shall be
both before and during the brazing process.
the brazing process.
When breaking into the refrigerant circuit to make repairs- or for any other purpose –
purge the circuit with inert gas;
purge again with inert gas;
open the circuit by cutting or brazing;
14 EN
13. Charging procedures
equipment. Hoses or lines shall be as short as possible to minimize the amount of refrigerant
contained in them.
-Cylinders shall be kept upright.
-Ensure that the refrigeration system is earthed prior to charging the system with refrigerant.
Prior to recharging the system is shall be pressure tested with OFN. The system shall be leak
tested on completion of charging but prior to commissioning. A follow up leak test shall be
14. Decommissioning
with the equipment and all its detail. It is recommended good practice that all refrigerants
taken is case analysis is required prior to re-use of reclaimed refrigerant. It is essential that
to the appropriate standards.
been cleaned and checked.
15. Labeling
Equipment shall be labeled stating that it has been de-commissioned and emptied of
refrigerant. The label shall be dated and signed. Ensure that there are labels on the equipment
recommended good practice that all refrigerant into cylinders, ensure that only appropriate
15
EN
refrigerants.
units and especially not in cylinders.
the suppliers. Only electric heating to the compressor body shall be employed to accelerate
this process. When oil drained form a system, it shall be carried out safely.
16 EN
Drain hose
For warranty purposes, please
The SN is labeled opposite the
Please refer to the electronic
warranty instructions,
6. STEPS BEFORE USE
User's manual
with Compressor
SN: D2002255780115715200209
SN: D2002255780115715200209
EN
INSTALLATION TIPS
are not obstructed. Allow 20cm
of clearance around the unit and
possibility the coils will collect
frost at temperatures that are
in low performance.
clothes dryer, heater or
radiator
operating position and
allow 2 hours before
malfunctions.
water bucket and check if any packaging
multiple socket outlet, which is also being
used for other electrical appliances.
40cm or more
40cm or more
20cm or more
20cm or more
20cm or more
18 EN
7. GETTING TO KNOW YOUR DEHUMIDIFIER
Handle
Air Intake
Grill
Filter
Water Tank
Control
Panel
Casters
Air Outlet
Grill
Drain Hose
Outlet
Power Cord
Power Cord Strap
- For storage usage
EN
8. CONTROL PANEL • FUNCTIONS
POWER
power is restored, the appliance will automatically restart at the preselected
settings prior to the power failure.
MODE
Dryer mode: Press the mode button , until the drying clothes function is selected. A light
unit will operate in Turbo fan Speed for 1 hour before checking the room’s humidity again.
on the room size and the dampness of the clothes.
• For optimal results manual wringing of the clothes is suggested.
• Allow 30-50cm distance from the moist clothes.
20 EN
Continuous mode (Cont.): Press the mode button
This mode is suggested for special humidity conditions where big amounts of
Press the mode button
buttons.
Press the mode button
Cont. or Smart modes are selected.
TIMER
turn on.
This manual suits for next models
1
Table of contents
Languages:
Other INVENTOR Dehumidifier manuals
INVENTOR
INVENTOR PR1-ION21L User manual
INVENTOR
INVENTOR DE-MDDT08 User manual
INVENTOR
INVENTOR C2-12L User manual
INVENTOR
INVENTOR PRM-20L User manual
INVENTOR
INVENTOR CF-WUHIB-20L User manual
INVENTOR
INVENTOR PR-ION-20L User manual
INVENTOR
INVENTOR EP3-ION16L User manual
INVENTOR
INVENTOR PR1-ION10L User manual
INVENTOR
INVENTOR RS-WUI-08L User manual
INVENTOR
INVENTOR EP3-ION-10L User manual
INVENTOR
INVENTOR EU-OSK105 User manual
INVENTOR
INVENTOR KRM-12L User manual
INVENTOR
INVENTOR C2-10L User manual
INVENTOR
INVENTOR P3F-50L User manual
INVENTOR
INVENTOR KRM-10L User manual
INVENTOR
INVENTOR R2-ION8L User manual
INVENTOR
INVENTOR EVP-WF20L User manual
INVENTOR
INVENTOR DEI 10LT User manual
INVENTOR
INVENTOR K1-10L User manual
INVENTOR
INVENTOR R2-ION8L User manual
