InWin MERCURY AM120S User manual

User Manual

Product Video Information
Mercury AM120S Product Video
Mercury AM120S Installation Video

Product Story
Mercury AM120S is a slender cooling fan designed by
InWin. Mercury emits a silent 17 - 29 dB(A) noise level
due to the carefully constructed fan blades and inner
frame. The overall construction not only presents silent
operation, but enhances thermal efficiency too. The
ARGB, slenderized 20mm-thick cooling fan offers space-
conservation, providing more 󽗊exibility within a con󽗉ned
enclosure.
Light up your build with the ARGB LEDs to make your PC
as vibrant as the cosmos! . Mercury delivers more than
just pretty lights; they are versatile enough to perform
superbly on radiators too.

Triple Pack
1. Mercury AM120S Fans x 3
2. Screws x 12
3. ARGB One-Click Controller x 1
4. ARGB Extension Cables 500 mm x 2
5. PWM Fan Extension Cables 500 mm x 2
Single Pack
1. Mercury AM120S Fan x 1
2. Screws x 4
3. ARGB Extension Cable 500mm x 1
4. PWM Fan Extension Cable 500mm x 1
Package Contents

120 mm
120 mm
20 mm
* Speci󽗉cations may vary based on di󽗈erent regions.
* InWin products comply with RoHS regulations.
Model Mercury AM120S
Quantity Included Single Pack Triple Pack
Model Number IW-FN-AM120S-1PK IW-FN-AM120S-3PK
Colors Black
Fan Size 120 x 120 x 20 mm
Materials PBT, PC
Rated Voltage DC 12V
Rated Power 1.8W
Rated Current 0.15A
ARGB Rated Voltage DC 5V
ARGB Rated Power 1.4W
ARGB Rated Current 0.28A
Speed Mode PWM 400 - 2000 +/- 10% RPM
Air Flow 60.71 CFM
Air Pressure 2.72 mm / H2O
LED Addressable RGB
Connector (Fan to Fan) Non-Modular Cables
Connector to M/B 4-Pin (12V, PWM), 3-Pin (5V, ARGB)
Noise Level 17 - 29 dB(A)
Bearing Type Long Lifespan Sleeve Bearing
Net Weight 138 g / 0.3 lbs 418 g / 0.92 lbs
Gross Weight 184 g / 0.4 lbs 519 g / 1.14 lbs
Package Dimension 165 x 125 x 25 mm 165 x 125 x 65 mm
(L x W x H) 6.49 x 4.92 x 0.98" 6.49 x 4.92 x 2.55"
Warranty 3 Years
Speci󽗉cations

Cable Information
PWM Fan Cable
ARGB Cable
PWM Fan Extension Cable
ARGB Extension Cable
ARGB One-Click Controller Note: Only in Triple Pack
1
2
4
3
GND
+12V
FG
PWM
2
4
1
+12V
PWM
GND
130 mm20 mm
GND
KEY
DATA
+5V
4
1
3
2
GND
KEY
DATA
+5V
4
1
3
2
130 mm20 mm
1
2
4
3
GND
+12V
FG
PWM
1
2
4
3
500 mm
GND
KEY
DATA
+5V
4
1
3
2
GND
KEY
DATA
+5V
4
1
3
2
500 mm
200 mm

1.
Please make sure the power is o󽗈.
2.
Install the fans in your PC case and mount them
in the designated areas.
*How to determine your air󽗊ow direction:
The arrow shows the intake direction of
the air blowing through.
3.
How to attach the fans and connect to a
motherboard
Installation
IN
OUT
4-Pin (12V, PWM)
3-Pin (5V, ARGB)

4.
You can use ARGB extension cables and PWM
fan extension cables for the following reasons:
a. The distance between fans are too far away.
b. The distance between the fan to the M/B is
too far away.
c. The distance between the fan to the ARGB
One-Click Controller is too far away.
Installation
PWM Fan Extension Cable
ARGB Extension Cable
Use the ARGB Extension Cable ONLY on the ARGB One-Click Controller.
Note: The AM120S is 20mm thick. If paired with a liquid-cooling
system, please use the appropriate screw-length to avoid
puncturing the radiator. Make sure the fan installed securely and
correctly.
a
b
c
200 mm

*
If your motherboard does not support a
3-Pin ARGB header (5V, ARGB), please use the
included ARGB One-Click Controller to connect
to your PSU's SATA cable and the fan's ARGB
Cable in order to use the 14 di󽗈erent lighting
e󽗈ects. (Only in Triple Pack)
PSU's SATA cable
ARGB One-Click Controller
4-Pin (12V, PWM)
Hold the button to turn on or o󽗈 the lights.
Tap the button to change the lighting modes.
1
Rainbow
8
Two-Tone Ring
2
LED-Red Breathing
9
Diagonal Transition
3
LED-Green
10
Rotating LED Trio
4
LED-Blue
11
Full Circle
5
LED-Purple
12
Flow-Red
6
LED-White
13
Flow-Green
7
Light at the endof
theTunnel
14
Flow-Blue
*InWin reserves the right to change the lighting modes.
* For more installation instructions, please scan
the QR Code or watch the video in the
website link: https://youtu.be/_S_LLcqe0KI .

If your fan does not operate properly, please
follow the instructions below:
1. Please check your system's power.
2. Please make sure all the connectors are
connected properly.
3. For more technical support, please visit
InWin Forum at https://forum.in-win.com/
1.Please install the fans by following our
instructions.
2.When storing the fans, please keep this product
away from high temperatures. Keep it away from
machines such as heaters that might cause high
temperatures.
3.Please do not put anything in the impeller.
4.Please do not modify the wires or the connectors
provided by InWin.
5.Please do not touch the fan blades when the fan
is in operation.
6.Please only use your fan in a computer case.
7.Please keep this product away from any liquids.
Troubleshooting
Important Notes

Copyright © 2022 In Win Development Inc. All Rights Reserved.