InWin NR24 User manual

User Manual
All-In-One
Nebula Liquid CPU Cooler

-2-
NR Series Product Video
Product Video Information

-3-
Interstellar Cooling
High Performance AIO Liquid CPU Cooler NR Series
will provide your build with stellar visual aesthetics.
The water block is filled with crystal shimmering stars
and the radiator is equipped with high static pressure
fans Luna AL120. Gaze into the realms of Nebula!
Product Story

-4-
Speci󽗉cations
Model NR24 NR36
Model Number IW-LC-NR24 IW-LC-NR36
CPU Socket Support
Intel®LGA 1700/ 1200/ 2066/ 2011-V3/ 2011/
1366/ 1156/ 1155/ 1151/ 1150
AMD®AM4/ AM3+/ AM3/ AM2+/ AM2/ FM2+/
FM2/ FM1/ TR4
Radiator
Dimensions
(L x W x H)
277 x 120 x 27 mm
(10.9 x 4.7 x 1.1")
397 x 120 x 27 mm
(15.6 x 4.7 x 1.1")
Materials Aluminium
Tube Length 400 mm 450 mm
Tube Material Rubber with Nylon Braided Sleeve
Water
Block
Dimensions
(L x W x H)
87.3 x 75 x 68 mm
(3.4 x 3.0 x 2.7")
Materials
Copper, Glass, Plastic
Pump
Dimensions
(L x W x H)
66 x 50 x 31 mm
(2.6 x 2.0 x 1.2")
Materials
PPS GF
Pump Speed 5200 +/- 10% RPM
Fan
Model Luna Series AL120
Quantity
Included 2 PCS 3 PCS
Dimensions
(L x W x H)
120 x 120 x 25 mm
(4.7 x 4.7 x 1.0")
Speed Mode PWM 400-1800 +/- 10% RPM
Noise Level 25 dB(A) (Normal)
Airflow 82.96 CFM
Static Pressure 2.31 mm / H2O
Connectors 4-Pin (12V, PWM), 3-Pin (5V, ARGB)
Rated Voltage DC 12V
Bearing Type Long Lifespan Sleeve Bearing
Package Dimensions
(L x W x H)
331 x 265 x 136 mm
(13 x 10.4 x 5.4")
459 x 244 x 136 mm
(18.1 x 9.6 x 5.4")
Net Weight 0.85 kg / 1.87 lb 1.05 kg / 2.31 lb
Gross Weight 2.0 kg / 4.41 lb 2.45 kg / 5.4 lb
Warranty 3 Years
* InWin's products comply with RoHS regulation.
* Speci󽗉cations may vary based on di󽗈erent regions.
NR24 NR36

-5-
a
b
c
e
l
m
n
r
o
p
q
s
t
fgh i j
d
k
a. QR Code Card x 1
b. Intel Mounting Bracket x 2
c. AMD Mounting Bracket x 2
d. Luna AL120 Fans x 2
e. Intel CPU Backplate x 1
f. Standoff Screws x 4
(LGA 20XX)
g. Standoff Screws x 4
(LGA 115X/1200/1366)
h. Standoff Screws x 4
(LGA 1700)
i. Standoff Screws x 4 (AMD)
j Standoff Screws x 4 (TR4)
k. 240 Radiator x 1
l. ARGB Water Block Cable x 1
m. ARGB Fan Cable x 1
n. PWM Fan Cable x 1
o. Washer x 8
p. Fan Screws x 8
q. Radiator Screws x 8
r. ARGB One-Click Controller x 1
s. Thumbscrew Caps x 4
t. Thermal Compound x 1
NR24 Package Contents

-6-
NR36 Package Contents
a
b
c
e
l
m
n
r
o
p
q
s
t
fgh i j
d
k
a. QR Code Card x 1
b. Intel Mounting Bracket x 2
c. AMD Mounting Bracket x 2
d. Luna AL120 Fans x 3
e. Intel CPU Backplate x 1
f. Standoff Screws x 4
(LGA 20XX)
g. Standoff Screws x 4
(LGA 115X/1200/1366)
h. Standoff Screws x 4
(LGA 1700)
i. Standoff Screws x 4 (AMD)
j Standoff Screws x 4 (TR4)
k. 360 Radiator x 1
l. ARGB Water Block Cable x 1
m. ARGB Fan Cable x 1
n. PWM Fan Cable x 1
o. Washer x 12
p. Fan Screws x 12
q. Radiator Screws x 12
r. ARGB One-Click Controller x 1
s. Thumbscrew Caps x 4
t. Thermal Compound x 1

-7-
* Please follow the related chapters to assemble.
* Please use the original provided accessories to avoid damage to the product.
Installation Guide
(1) Install AL120 Fans to Radiator
(2) Install Fans and Radiator combo to your
PC chassis.
!
Parts Required：Radiator Screws
Parts Required：240 mm/360 mm radiator, Luna AL120 Fans, Washers,
Fan Screws
Note：Please be sure to use a washer on each screw before installation.

-8-
(3) Installation for motherboards
A. For Intel Motherboards (LGA 115X/1200/1366/20XX/1700)
(1) Switch the Intel backplate pins according to the CPU socket of your
motherboard.
(2) Attach the Intel backplate to the bottom of the motherboard.
(3) Install the standoff screws onto your motherboard. Ensure to use the
correct standoff screws for your CPU socket.
Note: Intel LGA 20XX does not require back plate installation.
Note: Intel LGA 20XX does not require backplate installation.
Parts Required：Standoff Screws (LGA115X/1200/1366/20XX/1700)
LGA1700
LGA1366
LGA115x / 1200
Installation Guide

-9-
B. For AMD Motherboards (AMD or TR4)
(1) Please remove the retention module. AMD's backplate comes with
AMD's motherboard. Attach it to the bottom of motherboard.
(2) Install the standoff screws onto your motherboard. Ensure to use the
correct standoff screws for your CPU socket.
Parts Required：Standoff Screws (AMD or TR4)
Installation Guide

-10-
(4) Install the Pump Unit
A. Choose your Mounting Bracket according to your CPU
B. Apply the Thermal Compound
evenly on the CPU surface
D. Install the water block and then tighten it with the
Thumbscrews
C. Remove the protect film
from the cold-plate
Parts Required: Intel or AMD Mounting Brackets, Thumbscrew Cap, Thermal
Compound
Intel
AMD
Installation Guide

-11-
(5) Connection Cables
Parts Required: PWM Fan Cable, ARGB Fan Cable, ARGB Water Block Cable,
Pump Cable
GND
DATA
+5V
1
2
3 GND
KEY
DATA
+5V
1
4
2
3
1
4
2
3
GND
KEY
DATA
+5V
3 Pin to NR24/36
Water Block
5V ARGB Header to ARGB
Water Block Cable
5V ARGB Header
5V ARGB Header to
AL120 Fans
5V ARGB Header to M/B or
ARGB One-Click Controller
5V ARGB Header to
ARGB Fan Cable
ARGB Water Block
Cable
ARGB Fan Cable
Installation Guide

-12-
PWM Fan Cable
Pump Cable
4 Pin Wafer to
AL120 Fans
3 Pin to M/B AIO_Pump
* If your M/B does not have an AIO_Pump, you can connect the 3 Pin to a
fan header, but it is recommended to set the output to DC 12V.
100±5
100±5
600±10
P2
P3
P4
GND
FG
PWM
P1
GND
PWM
2
4
1
+12V
+12V
FG
3
GND
PWM
2
4
1
+12V
GND
PWM
2
4
1
+12V
3
3
2
3
4
1
4 Pin Header to M/B
CPU_FAN
Installation Guide

-13-
(6) ARGB One-Click Controller Installation
If your motherboard does not support ARGB effects, please use the
included ARGB One-Click Controller in order to use the 14 lighting modes.
ARGB Cable
Header
ARGB One-Click
Controller PSU's SATA Cable
Installation Guide

-14-
1Rainbow 8Two-Tone Ring
2LED-Red Breathing 9Diagonal Transition
3LED-Green 10 Rotating LED Trio
4LED-Blue 11 Full Circle
5LED-Purple 12 Flow-Red
6LED-White 13 Flow-Green
7Light at the endof the Tunnel 14 Flow-Blue
Hold the button to turn on or offthe lights. Tap the button to
change the lighting modes.
* InWin reserves the right to change the lighting modes.
Installation Guide

-15-
Troubleshooting
■ If your AIO pump or fan does not operate properly,
please follow the instructions below：
1. Please check your system’s power.
2. Please make sure all the connectors are connected properly.
3. For more technical support, please visit the InWin Forum website at
https://forum.in-win.com/

-16-
■ Notices
1. Install in accordance with the user manual’s instructions and safety warnings.
Incorrect installation may burnout the motherboard and other system
components.
2. Keep this product away from areas with high temperatures such as: heat
dissipation machines, air conditioners or other machines which may generate
high temperatures.
3. Please do not put anything in the impeller.
4. Do not modify the cables and/or connectors included with this product.
5. Please do not put your hands or other objects into the fan blades when the fan
is in operation. And please make sure to keep away from children and pets.
6. Please only use this product in a computer case.
7. Please keep this product away from any liquids.
8. Please use only this product's exclusively supplied cables. Other cables may
not be compatible and could cause serious damage to your system and power
supply
■ Warranty
1. For more detailed warranty information, please visit the InWin retail website at
www.in-win.com
2. The actual product is subject to change without prior notice.
IN WIN DEVELOPMENT INC. reserves the right to make any 󶇰nal modi󶇰cations.
Notices and Warranty

-17-
Copyright © 2021 In Win Development Inc. All Rights Reserved.