InWin Nebula 515 User manual

User Manual

515/N515 Installation Video
515/N515 Product Video
Product Video InformationProduct Video Information
0202

Product Story .........................................04
Specifications .........................................05
Package Contents ...................................06
Case Structure ........................................07
Cable Information ........................................09
Installation Guide ...................................10
Notices and Warranty ..............................18
Table of ContentsTable of Contents
0303

Product StoryProduct Story
The 515 is a stunning computer chassis crafted from
1.2 mm SECC steel and tempered glass. The distinctively
clean panels are complemented with mesh to increase
ventilation. In addition to the 515, the N515 has a front
panel showing an in󶇰nite crystal universe where light
extends in all directions! Both cases are prebuilt with a
LUNA addressable RGB fan that will cool your system in
style!
0404

Model 515 N515
Model Number IW-CS-515BLK-
1AL120
IW-CS-N515BLK-
1AL120
Colors Black
Case Type Mid Tower
Materials SECC, ABS, Tempered Glass
M/B Compatibility 12” x 13” E-ATX, ATX, Micro-ATX,
Mini-ITX
Expansion Slots 7 x PCI-E
Maximum Compatibility VGA Card Length: 385 mm
CPU Heatsink Height: 160 mm
I/O Ports
1 x USB 3.2 Gen 2x2 Type-C
2 x USB 3.2 Gen 1
HD Audio
Internal Drive Bays 2 x 3.5” / 2.5”
2 x 2.5”
Thermal Solution
Compatibility
Air Cooling Fans:
Top: 3 x 120 mm
Rear: 1 x 120 mm
Bottom: 3 x 120 mm
Front: 2 x 120 mm
(1 InWin Luna AL120 Fan Included)
Water Cooling Radiator:
Top: 1 x 360 mm
Rear: 1 x 120 mm
Bottom: 1 x 360 mm (Slimm)
(Remove Graphic Cards Holder)
Front: 1 x 240 mm
* Number of fans pre-installed may vary based on di󶇯erent regions.
Power Supply Compatibility PSII: ATX12V
- Length up to 200 mm
Product Dimensions
(L x W x H)
515 x 225 x 502 mm
20.3 x 8.8 x 19.7"
Package Dimensions
(L x W x H)
610 x 572 x 335 mm
24 x 22.5 x 13.1"
Net Weight 11.38 kg
11.65 kg
Gross Weight 13.46 kg 13.73 kg
* InWin products comply with RoHS regulation.
Speci󶇰cationsSpeci󶇰cations
0505

Motherboard Stand-o󶇯s Motherboard
Stand-o󶇯 Socket Hexagon Head Screws
2.5" HDD Screws 3.5" HDD Screws Water-Cooling
System Washers
Cable Ties Graphics Card Holders ARGB One-Click Controller
Package ContentsPackage Contents
515 Chassis N515 Chassis
QR Code Card Accessories Bag
x 11
x 18
x 1
x 10
x 18
x 10
x 8
x 1 x 1
0606
3RAMZF173600

Case StructureCase Structure
12345
0707
Tempered Glass
1Power Button
2Power/HDD LED Indicator
32 x USB 3.2 Gen 1 Ports
4Audio Ports (Earphone and Microphone)
51 x USB 3.2 Gen 2x2 Type-C Port

Case StructureCase Structure
63.5" / 2.5" Drive Bay
72.5" Drive Bay
8Top Fan/Radiator Mounting Area
9Rear Fan/Radiator Mounting Area
10 Bottom Fan/Radiator Mounting Area
11 Front Fan/Radiator Mounting Area
12 Motherboard Mounting Area
13 PCI-E Expansion Slot
14 Graphics Card Holder Mounting Area
15 Power Supply Mounting Area
16 Fan Dust Filter
17 Shock-Proof Stand
0808
7
7
8
9 12
15
11
14
16
10
13
6
6
17

Cable InformationCable Information
0909
Power Switch Cable
HD Audio
USB 3.2 Gen 1
ARGB Cable
USB 3.2 Gen 2x2 Type-C
x1
x1
x1
x1
x1

Installation GuideInstallation Guide
(Please follow the steps to assemble)
Opening the Glass Panel
Removing the Dust Filter and Graphics
Card Holder
For the Tempered Glass Panel, please remove it by
pressing the rear button.
Note: You will need to remove the Tempered Glass Panel 󶇰rst in order to remove the Mesh
Fan Grill.
It is recommended to remove the Graphics Card Holder
when installing/removing your motherboard or graphics
card.
1010
1
2

Parts Required:
Motherboard Stand-O󶇯s, Motherboard Stand-O󶇯 Socket
Hexagon Head Screws
1111
Motherboard Installation
3
Parts Required:
Hexagon Head Screws,
Graphics Card Holder (Holder & Rubber & Bracket)
GPU Installation
4

Note: Use your Graphics Card Holder to support your GPU. It is
adjustable to meet your needs.
1212
Opening the Front Panel
5
You will need to remove the Front Panel by pressing
a tab to the right.
Then pull the panel from beneath with your right hand.
tab

1313
Installing Front Fans
Closing the Front Panel
6
7
Secure the Fans with screws from the outside.
All crosses need to 󶇰t into the corresponding holes to 󶇰t
neatly back into place.
Parts Required:
Fan Screws

HD Audio Header
USB 3.2 Gen 1
1
2
3
4
5
6
7
8
9
10
19
18
17
16
15
14
13
12
11
1414
PORT2_L
PORT2_R
PORT1_R
PORT1_L
BLUE
PURPLE
YELLOW
10
8
6
4
2
KEY
WHITE
BLACK
9
7
5
3
1
Connection Cables
I/O Wires
8
POWER SW
RESET SW
(Depends on Motherboard)

USB 3.2 Gen 2x2 Type-C
1515
If your motherboard supports Type-C, please connect
the Type-C connector with the header directly on the
motherboard.

1616
Fan/Liquid Cooling Radiator Installation
9
Front Panel ARGB Cable
Please choose a motherboard that supports the
addressable RGB lighting e󶇯ect in order to light up the
LED panel. Please follow the directions of the image
below and insert addressable RGB cable into the 3-pin,
5V header directly on the motherboard.
Note: It is recommended that you choose an AIO with tubes that are around 450 mm
or more in length. The InWin BR36 & NR36 AIO are examples that would 󶇰t well.
To remove the side Mesh Fan Grill, lift up on the bottom
tabs.

1717
2.5" Drive Bay Installation
3.5" Drive Bays Installation
10
11
Parts Required: 2.5" HDD Screws
Parts Required: 3.5" HDD Screws

1818
Power Supply Installation
Closing all Panels
12
13
Parts Required:
Hexagon Head Screws

1818
Completing Installation
14
■ Notices
1. Please follow the user manual for installation guidelines.
2. When installing computer components, please use the antistatic precautions
to prevent ESD (electrostatic discharge) damage. This can cause injury to the
installer and/or damage to the machine. Incorrect installation may burn your
motherboard and other system components.
3. To avoid any damages, please do not use this product for any other purpose
than its intended use.
4. Any modi󶇰cations may damage the product.
5. Please remove all internal devices before shipping or moving.
(Including power supply, hard drives, CD-ROM, motherboard and CPU, etc)
■ Warranty
1. For more detailed warranty information, please visit the InWin retail website
at www.in-win.com
2. The actual product is subject to change without prior notice.
In Win Development Inc. reserves the right to make any 󶇰nal modi󶇰cations.
Notices and WarrantyNotices and Warranty

Copyright © 2021 In Win Development Inc. All Rights Reserved.