ION LP2CD User manual

 QUICKSTART GUIDE
ENGLISH ( 1 – 14 )
 MANUAL DE INICIO RÁPIDO PARA EL USUARIO
ESPAÑOL ( 15 – 28 )
 GUIDE D’UTILISATION RAPIDE
FRANÇAIS ( 29 – 42 )
 KURZANLEITUNG
DEUTSCH ( 43 – 57 )
 MANUALE RAPIDO DI UTILIZZAZIONE
ITALIANO ( 58 – 71 )
 SNELSTARTGIDS
NEDERLANDS ( 72 – 85 )

1
QUICK START GUIDE
oMake sure that the items listed below are included in the box.
oREAD SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
oGo to http://www.ion-audio.com for product registration.
INTRODUCTION
Thank you for purchasing this product. The LP 2 CD is the fastest and easiest way to convert music from vinyl
recordings or external audio sources, such as tape players or reel-to-reel, to a CD or directly to your computer.
Featuring Automatic Track Split, the LP 2 CD detects silence between songs and automatically splits them into
individual tracks for your convenience.
RECORDING METHOD 1 – TO CD
Rip your album to the Internal Flash Player, and burn one or more CDs. Once your
CD has been recorded, you can listen to it in the car, at home, on your computer, or
anyplace with a standard CD player.
RECORDING METHOD 2 – TO YOUR COMPUTER
Use the included software to automatically convert tracks to your iTunes*
library during playback. Once your recordings have been converted, you
can transfer them to portable media devices, such as an iPod*, or burn them
onto a CD using third-party CD-burning applications
INCLUDED SOFTWARE
We have included software to aid you in converting your records to digital music:
EZ Vinyl/Tape Converter (PC only) is the quickest and easiest way to turn your recordings into digital media.
EZ Vinyl/Tape Converter conveniently saves your recordings in your iTunes* library. Novice users may find
this application preferable. On the CD, we have included a handy Software Quickstart Guide with step-by-step
instructions on software installation and operation.
EZ Audio Converter (Mac only) is a basic converter application for Mac OS X and is ideal for novice users.
Please refer to the included Software Quickstart Guide for step-by-step instructions on software installation and
operation.
* iTunes and iPod are trademarks of Apple, Inc., registered in the U.S.A. and other countries.
SLIPMAT
45RPM
ADAPTER COUNTERWEIGHT PLATTER
USB
CABLE CD
PRE-MOUNTED
CARTRIDGE
LP 2 CD
TURNTABLE
DUST COVER
MOUNT
DUST COVER

2
REAR PANEL OVERVIEW
43
2
1
1. Power Input: Connect the included power cable from the turntable to a live power source.
2. USB Audio Output: Use the included USB cable to connect your turntable to your computer. The
USB connection will provide audio from the turntable (or the Line In inputs, if the Line/Phono switch on
the top panel is set to Line) to your computer. The USB connection will also output audio from your
computer through the turntable’s RCA outputs. For transferring your vinyl records to your computer, we
have provided several software applications on the included CD. Please refer to “Included Software”
section for details on the bundled software applications.
3. Line Out: Use a standard stereo RCA cable to connect these outputs to the audio inputs of your home
stereo system. (Please note: you can still copy music to a CD or to your computer even if the audio
outputs of the turntable are not connected to a stereo system).
4. Line In: Connect tape players, reel-to-reel, or any other line-level audio source to these RCA inputs.
FRONT PANEL OVERVIEW
1
1. CD Drive: The turntable’s CD drive functions as a CD player or burner, depending on the type of disc
inserted into the tray. When using non-blank, finalized CDs, the drive will function as a CD player,
allowing you to play music through the turntable’s Line Out or to rip tracks to the Internal Flash Player.
When using blank CD-R discs, the drive functions as a CD burner allowing you to burn audio from the
unit’s Internal Flash Player (i.e. audio ripped from the turntable or from external sound sources
connected to the Line In).

3
TOP PANEL OVERVIEW
2
5
1
6
4
3
78
11
12
13
109
1. POWER BUTTON: Press this button to turn the unit on and off.
2. PLATTER: This platter must be securely fastened to the turntable prior to operation. The Motor Drive Belt can
be found on the drive ring underneath the platter. See “Platter Setup” section for detailed information on
installing the Motor Drive Belt.
3. TONEARM ASSEMBLY: See “Tonearm Overview” section for a detailed description of the tonearm.
4. 45 RPM ADAPTER HOLDER: You may place the 45 adapter here when it is not in use.
5. START/STOP BUTTON: This button starts and stops the turntable motor. If the button doesn’t seem to be
functioning, check to make sure that the Motor Drive Belt is properly installed, as described in the “Platter
Setup” section. Please note that the tonearm needs to be moved away from resting position (arm clip) for the
turntable motor to activate.
6. DISPLAY: The display helps you access menu options and information relevant to the operation of the unit.
7. MENU AND FUNCTION BUTTONS: See “Menu and Function Buttons” section for a detailed description of
these buttons.
8. CD CONTROL BUTTONS: See “CD Control Buttons” section for detailed information.
9. HEADPHONE VOLUME: Adjust the volume of the headphone signal with this knob.
10. 1/8” HEADPHONE OUTPUT: Connect your 1/8” headphones to this output.
11. RECORD LEVEL: This knob adjusts the level of the audio signal from the turntable or from audio sources
connected to the Line In inputs on the rear panel.
12. PHONO / LINE SWITCH: This switch selects the input audio signal. Set this switch to Phono when playing
and transferring your vinyl records to CD or to your computer. Set this switch to Line if you would like to
transfer or listen to music from external audio sources connected to the Line In inputs on the rear panel.
13. 33 / 45 / 78 RPM SELECTOR SWITCH: Set this switch to the appropriate position when playing back records.
If the music plays at a strange or unusual pitch, this may be a good indication that the wrong RPM setting has
been selected.

4
3
1
2
4
5
1234
1234567
MENU AND FUNCTION BUTTONS
1. [MENU]: This button enters the menu options for the current Mode of
operation. CD Player Mode menu options include Switch Mode, Copy
Track, Copy All, Repeat, System Info. Internal Flash Player Mode menu
options include Switch Mode, Move Track, Repeat, System Info.
2. [DISPLAY]: Press this button to cycle through different time display settings on the LP 2 CD: Elapsed
(default), Track Remain, Total Remain. This button also functions as a [SELECT] button while
selecting Menu options.
3. [ERASE]: This button allows you to erase tracks from the Internal Flash Player. This button also
functions as a [NO] button while selecting Menu options.
4. [SPLIT TRK]: The LP 2 CD features Auto Split, which automatically detects silence between songs
and splits the recording into individual tracks. By default, Auto Split is enabled. If you choose to
disable this feature and manually split your tracks, then you can use the [SPLIT TRK] button in between
songs to create a new track. You can also perform this operation after you’ve recorded your music
(see “Splitting Tracks In Internal Flash Player” section). This button also functions as a [YES] button
while selecting Menu options.
5.
CD CONTROL BUTTONS
1. [REW]: Press this button to skip to the
previous track. Hold down this button
while playing a track to quickly scan
backward.
2. [FF]: Press this button to skip to the next track. Hold down this button while playing a track to quickly
scan forward.
3. [STOP]: Press this button to stop playback and go back to the first track. This button also stops
recording when ripping your music to the Internal Flash Player.
4. [PLAY / PAUSE]: Press this button to play the currently selected track; the green LED below the button
will light. Press again while the track is playing to pause; the green LED will blink while paused. Press
again to resume playback. This button also initiates recording while in Record Ready Mode.
5. [RECORD]: Press this button to enter Record Ready Mode. This mode allows you to record audio
from the turntable platter or from external audio sources connected to the Line In inputs to the Internal
Flash Player (see “Recording Music to the Internal Flash Player” section for more details). When you
press [RECORD], a red LED below the button will begin to blink to let you know that you are ready to
record.
6. [BURN CD]: Once you have recorded your music to the Internal Flash Player, press this button to burn
the player contents directly to a compatible, blank CD-R (see “Burning Internal Flash Player Contents
to CD” section for more details).
7. [OPEN/CLOSE]: This button opens and closes the CD tray.
TONEARM OVERVIEW
1. Counter Weight and Scale Ring: The Counterweight is used to balance the head
shell and cartridge assembly so that the proper amount of stylus pressure is
applied to the record.
2. Anti-Skate Adjustment: This knob is used to compensate for inward tracking
forces. See “Tonearm Setup” section for more details.
3. Arm Clip: This specially designed arm clip secures the tone arm while at rest or
when not in use. The arm clip has been designed to remain in the up position while
unlocked.
NOTE: When transporting the turntable, it is always recommended that the
headshell be removed and the arm clip secured to prevent tonearm or turntable
damage.
4. Tone Arm Lock Nut: This Aluminum nut is used to secure the head shell and
cartridge assembly to the tone arm tube. See Cartridge Setup for more details.
5. Cartridge and Headshell: The cartridge is pre-mounted on a standard headshell.
The cartridge is user replaceable and compatible with a variety of standard
cartridges. Be sure to remove the clear plastic cover before operating the turntable
from the cartridge.

5
TONEARM SETUP
1. Begin by rotating the counterweight
counter-clockwise until it is in the
complete forward position (NOTE:
this is also the maximum amount of
pressure that can be applied to the
cartridge.)
2. Now there should be a feeling of
weight and resistance when the head
shell is raised and lowered. Begin
rotating the counterweight clockwise
(away from the pivot point) until the
weight and resistance feeling is
gone. If done properly, the tone arm
will pivot with very little resistance
back and forth indicating that there is
exactly 0 grams of stylus pressure.
3. With the counterweight in its new
position further away from tone arm pivot point, grasp the scale ring of the counter weight and rotate it until "0"
is in the vertical position.
4. Finally, rotate the counterweight (and scale ring) counter-clockwise (towards the pivot point) until the desired
amount of weight is reached. If the scale rotates 360 degrees beyond the zero point, the new scale ring reading
should be added to 3.5.
*The included head shell and cartridge assembly requires a minimum of 3 grams and no more than 5 grams for
optimum performance.
Setting the Anti-Skate Adjustment
In most cases, the Anti-Skate should be set to its minimum setting. Anti-Skate compensates for inward tracking forces
that occur with certain cartridges when the stylus nears the center of the record. If the turntable is experiencing
excessive skipping while nearing the center spindle, try increasing the Anti-Skate in the increments indicated on the
dial. Start by adding an increment of 1, test its performance, then increase it more, and so on.
IMPORTANT
Make sure that the felt slipmat is always placed on top of the platter while using the turntable. Failure to use
the slipmat may cause damage to your media as well as damage to the turntable.
Please remove the plastic cartridge cover (needle cover) before operating the turntable.
The tonearm needs to be moved away from resting position (arm clip) for the turntable motor to activate.
PLATTER SETUP
WARNING: Incorrect Platter setup can lead to poor turntable performance, platter instability or permanent motor damage.
1. Start by placing the rubber drive belt around the inner bottom ring of the turntable platter. This should come
preinstalled, but check to make sure that it is not twisted or damaged.
2. Install the platter on the center spindle and press it down firmly. Check to make sure that it rotates uniformly
and does not wobble excessively.
3. Rotate the platter so that the one of the holes is aligned with the Start Stop button on the front corner of the
turntable. The brass motor spindle should be visible through this hole.
4. Reach into the hole and pull the rubber drive belt off of the inner ring, and install it over the motor spindle. Be
careful not to twist the rubber drive belt during this step. Check to make sure the platter rotates uniformly. If the
drive belt is properly installed, there should be a slight amount of tension that brings the platter to a stop after
spinning it freely.

6
MOUNTING THE DUST COVER
1. Attach the included dust cover mounts to the turntable.
2. Attach the dust cover to the mounts as shown in illustration on the left.
THE TWO MODES
The LP 2 CD features two general modes of operation: CD
Player Mode and Internal Flash Player Mode. The currently
selected Mode will be indicated by the two LEDs (CD and
INT) located to the right of the display, as shown here.
CD Player Mode allows you to:
Play music from non-blank CDs using standard transport controls (Play, Pause, Stop, Skip, Fast-
Forward and Rewind)
Copy a specific CD track to the Internal Flash Player
Copy the entire CD contents to the Internal Flash Player
Internal Flash Player Mode allows you to:
Rip tracks from an audio source (vinyl or external source connected to Line In)
Play tracks stored in the Internal Flash Player, using standard transport controls (Play, Pause, Stop,
Skip, Fast-Forward and Rewind)
Erase recorded tracks from the Internal Flash Player
Split a recorded track into multiple tracks
Burn Internal Flash Player contents to a blank CD-R
CD PLAYER MODE
In this mode, you can play or rip music from a non-blank CD. When you first insert your CD, the screen will
display the information shown on the right:
1. The track which will be played when you press
[PLAY] (01 in this example).
2. The total number of tracks on the CD (12 in this
example).
3. The total duration of the CD in MM:SS
(minutes:seconds) format (62:35 in this example).
PLAYING MUSIC FROM CD
To play music from the CD, simply press the [PLAY] button. Once the CD is playing, the top line of the
display will show the elapsed track time and the bottom line will show stereo level metering with peak hold,
as shown in the illustration on the right.
You can cycle through different time display options by
pressing the [DISPLAY] button. Options include
‘Elapsed’, ‘Track Remain’ and ‘Total Remain’.
Press [FF] or [REW] to skip to the next or previous
track, respectively. Press and hold either button while
playing a track to quickly scan forward or backward.
Press [PAUSE] while a track is playing to pause
playback. Press again to resume.
Press [STOP] to stop playback.
Scanning disc... 
CD: 01/12 T62:35
CD Player

CD: 01/12 00:15
========== =


7
CD PLAYER MODE MENU OPTIONS
To access different menu options while in CD Player Mode, press the [MENU] button. To step through menu
options, continue to press the [MENU] button. After cycling through all available menu options, the unit will
return to the default CD Player Mode screen. The available menu options are described below:
Switch to Internal Flash Player Mode
This option allows you to manually switch to Internal Flash
Player Mode. Press [YES] to switch.
Copy Track
This option allows you to copy a single CD track to the
Internal Flash Player. You will see the screen displayed on
the right. The track which will be copied is the track which
was selected before entering the menu options. (Track “01”
in the example on the right).
Use [REW] and [FF] to select the destination for the copied
track (“03” in the example on the right). Press [YES] to
copy the track to the selected destination. Press [NO] to
cancel the operation.
Please note that the unit’s Internal Flash Player has a 99
track or 80 minute maximum capacity.
Copy All
This option allows you to copy an entire CD to the Internal
Flash Player. Press [YES] to copy the entire CD.
If the Internal Flash Player already contains data, you may
see the screen displayed on the right. Press [YES] if you
would like to copy the contents of the CD anyway.
Again, please note that the unit’s Internal Flash Player has
a 99 track or 80 minute maximum capacity.
You will then see the screen shown on the right. If you
would like to erase Internal Flash Player contents before
proceeding, press [YES]. If you would like to keep the
contents, press [NO]; in this case, the new tracks will be
copied starting at the next available location. (For
example, if there are 8 tracks currently stored in the player,
the new tracks will begin at 9).
Repeat Mode
This option allows you to repeat playback of a single track
or the entire CD. Options include Repeat Off, Repeat
Track, Repeat All. Use the [SELECT] button to cycle
through the different options.
System Info
This page displays various system information. While on
this page, press [SELECT] to cycle through the information
fields.
Note: System information may be required when contacting
our Technical Support team.
Menu: Copy Whole
CD to Int Flash?

Flash not empty
Copy anyway?

Flash not empty
Clear Flash 1st?

Menu: SystemInfo
Software: 1.00

Menu: Switch to
Flash Player?

Menu: Copy Track
CD:01 -> INT:03?

Menu: Repeat
Repeat Off


8
LINE-LEVEL AUDIO
SOURCE
RECORD
INTERNAL FLASH PLAYER MODE
The LP 2 CD features an Internal Flash Player. This player is used to rip music from the turntable or from an
external source connected to the line inputs on the rear of the unit. The process is illustrated below:
You might ask “why not burn my music directly to CD?” There are a couple of reasons why we have chosen
this approach:
Recording to the Internal Flash Player first allows you to correct any mistakes and perfect your track
transitions before committing your recording to a CD.
The spinning of a CD drive produces mechanical noise which can leak into your recordings. Recording
to the Internal Flash Player prevents this noise from entering your recordings, ensuring the highest
possible audio fidelity.
RECORDING MUSIC TO THE INTERNAL FLASH PLAYER
1. First, make sure that you are in Internal Flash
Player Mode (an orange LED next to “INT” should be
lit). If the unit is in CD Player Mode (green LED next to
“CD”), press [MENU] once and press [YES] when you
see the screen shown on the right to switch to Internal
Flash Player Mode.
2. Select which source you would like to record by flipping the PHONO / LINE switch to the
appropriate position. Set the switch to PHONO if you would like to record vinyl from the turntable
platter, or set the switch to LINE if you would like to record from an external source, such as a tape or
personal music player, connected to the LINE IN on the rear of the LP 2 CD.
3. Press the [RECORD] button. The red LED below the
button will begin to blink to let you know that you are
ready for recording and you will see the screen
displayed on the right. The number after ‘INT’ is the
location where the recording will be saved.
4. Cue the music which you would like to record. If
recording vinyl from the turntable platter, put the
needle on the vinyl record, at the beginning of the
section which you would like to record.
5. Play the music which you would like to record. If recording vinyl from the turntable platter, press
the turntable’s [START/STOP] button to begin playing the record.
INT:01 PressPLAY

RECORD
SELECT
SOURCE
TO BE
RECORDED
RECORD
MUSIC TO
INTERNAL
FLASH
PLAYER
INTERNAL
FLASH
PLAYER CD
BURN
INTERNAL
FLASH
PLAYER
CONTENTS
TO CD
Menu: Switch to
Flash Player?


9
6. Use the RECORD LEVEL knob to adjust the level of
the audio signal. The recording level will be
displayed on the screen. It is important to set your
recording levels correctly during this step, otherwise
you may end up with a recording that is too soft or is
too loud and distorted. Try to set the RECORD LEVEL
knob such that the peaks hit the (-4) or (-2) mark but
never reach MAX (“!” will be displayed if the recording
level is too loud and clipping).
7. Once you have adjusted your recording level to its optimal setting, stop the music. If recording
vinyl from the turntable, press the [START/STOP] button to stop the turntable platter.
8. Cue the section which you would like to record. If recording vinyl from the turntable, put the needle
back to the beginning of the section you wish to record.
9. When you are ready to begin recording, press [PLAY]
and then play the music you wish to record. If
recording vinyl from the turntable, immediately press
the [START/STOP] button to begin playing the record.
The red LED will be lit continuously to let you know
that recording is in progress. On the right of the
display, you will see a readout of the remaining
recording time.
10. By default, the LP 2 CD will detect silence between
songs and automatically split them into individual
tracks (Auto Split).
If you have not disabled Auto Split, then proceed to the
next step.
However, if you have disabled Auto Split, you will need to manually insert track markers in between
songs. To insert a track marker, press the [SPLIT TRK] button between songs. The ‘INT’ number
will increment to let you know that a new track was started. Inserting track markers will allow you to
burn songs as individual tracks when burning to CD.
Note: Redbook CD specification requires a 4 second minimum track length. The [SPLIT TRK] will
become active again 4 seconds after it has been pressed.
11. If recording music from a vinyl record, you may wish to pause recording while you flip the record:
a. Press [PAUSE] to temporarily pause recording once you reach the end of Side A.
b. Flip your record to Side B.
c. Press [SPLIT TRK] to insert a marker for the first track on Side B.
d. Press [PLAY] to begin recording Side B.
12. Once you have finished recording, press the [STOP]
button. The display will return to the default Internal
Flash Player screen, as shown on the right.
For information on burning the recordings onto a CD-
R, please refer to “Burning Internal Flash Player
Contents to CD” section.
PLAYING MUSIC FROM THE INTERNAL FLASH PLAYER
Once you have recoded your music to the Internal Flash Player, press the [PLAY] button to hear the
recordings.
You can cycle through different time display options by
pressing the [DISPLAY] button. Options include
‘Elapsed’, ‘Track Remain’ and ‘Total Remain’.
Press [FF] or [REW] to skip to the next or previous
track, respectively. Press and hold either button while
a track is playing to quickly scan backward or forward.
Press [PAUSE] while a track is playing to pause
playback. Press again to resume.
Press [STOP] to stop playback.
INT:01 PressPLAY
============ =

INT:01 T70:13
=========== =

INT:02 T65:01
New Track!

INT:13/13 T56:14
Int Flash Player

INT:01/13 00:15
========== =


10
SPLITTING TRACKS IN THE INTERNAL FLASH PLAYER
The Internal Flash Player allows you to split a selected track into two tracks, in case you may have missed
the transition when you first recorded your music to the Internal Flash Player. This is applicable if you have
disabled Auto Split and have chosen to split your tracks manually.
1. Make sure that you are in Internal Flash Player Mode
(an orange LED next to “INT” should be lit). If the unit
is in CD Player Mode (green LED next to “CD”), press
[MENU] once and press [YES] when you see the
screen shown on the right to switch to Internal Flash
Player Mode.
2. Locate the track which you would like to split, using the
[REW] and [FF] buttons.
3. Press [PLAY] to play the selected track.
4. Press and hold [FF] to locate the position where you
would like to split the track. If you go too far, you can
press and hold [REW] to scan backward.
5. Once at the location where you would like to make the
split, pause the music.
6. Press the [SPLIT TRK] button.
7. You will see the screen displayed on the right. You
can preview the 2nd track resulting from the split by
pressing [PLAY] while on this screen. Hold down [FF]
or [REW] to quickly scan forward or backward in the
track. Press [STOP] to stop the preview.
Press [YES] to keep or press [NO] to cancel the split.
ERASING MUSIC FROM THE INTERNAL FLASH PLAYER
In situations where you might have made a mistake during the recording process, or if the unit’s flash
memory becomes filled to capacity, you have the option to erase songs.
To erase a single track:
1. Make sure you are in Internal Flash Player Mode.
2. Use [REW] or [FF] to select the track you wish to
erase. The currently selected track will be displayed in
the upper left corner (‘02’ in this example).
3. Press [ERASE]. You will see the screen shown on the
right.
4. Press [YES] to erase the currently selected track or
press [NO] to cancel the operation.
To erase all tracks:
1. Make sure you are in Internal Flash Player Mode.
2. Press [ERASE]. You will see a screen similar to the
one shown on the right.
3. Press [SELECT] and you will see the screen change
as shown on the right.
4. Press [YES] to erase all tracks currently stored in the
Internal Flash Player, or press [NO] to cancel.
Please note that there is no way to “undo” this
operation! If you press [YES], all tracks stored in
Internal Flash Player will be erased permanently.
Menu: Switch to
Flash Player?

Track Split!
Keep? YES or NO

INT:02/13 T56:14
Int Flash Player

INT:Erase Trk02?
YES or NO

INT:Erase Trk02?
YES or NO

INT:Erase ALL?
YES or NO


11
INTERNAL FLASH PLAYER MENU OPTIONS
To access different menu options while in Internal Flash Player Mode, press the [MENU] button. To step
through menu options, continue to press the [MENU] button. To change the selected setting, press the
[SELECT] button. The available menu options are described below:
Switch to CD Player Mode
This option allows you to manually switch to CD Player
Mode. Press [YES] to switch.
Move Track
This option allows you to re-organize stored recordings by
moving a track to a new location. The track which will be
moved is the track which was selected before entering the
menu options (Track “01” in the example to the right).
The destination track is indicated in the ‘New’ field and can
be incremented and decremented with [FF] and [REW],
respectively. Once you have selected the desired
destination, press [YES] to move the track.
Auto Split
Auto Split is a feature which automatically detects silence
between songs and splits the recording into tracks in real-
time. By default, this option is enabled. However, you may
choose to disable this option and set track markers
manually.
Press [SELECT] to enable or disable Auto Split.
Repeat Mode
This option allows you to repeat a single track or the entire
collection of recordings stored in the Internal Flash Player.
Options include Repeat Off, Repeat Track, Repeat All.
While on this menu page, press [SELECT] to toggle
between these options.
System Info
This page displays the unit’s firmware version. While on
this page, press [SELECT] to cycle through the information
fields.
Note: System information may be required when contacting
our Technical Support team.
Menu: Repeat
Repeat Off

Menu: Switch to
CD Player Mode?

Menu: Move Track
Old:01 -> New:02

Menu: SystemInfo
Software: 1.00

Menu: Auto Split
On


12
BURNING INTERNAL FLASH PLAYER CONTENTS TO CD
Once you have recorded your music to the Internal Flash Player, you can burn it to a CD-R.
Please note that the LP 2 CD allows recording only to a blank CD-R. Please ensure that the
proper logo (shown on the right) appears on the CD you intend to use.
1. First, make sure that you are in Internal Flash Player
Mode (an orange LED next to “INT” should be lit). If
the unit is in CD Player Mode (green LED next to
“CD”), press [MENU] once and press [YES] when you
see the screen shown on the right to switch to Internal
Flash Player Mode.
2. Press the [BURN CD] button.
3. Insert a blank CD-R into the unit’s CD drive. If a non-
compatible blank CD is inserted, the unit will eject the
CD and ask you to insert a blank CD-R.
4. Once a blank CD-R has been detected, the burning
process will begin automatically. You will see the
screen displayed on the right. Please allow this
process to complete
Note: To cancel the burn process, press [STOP].
5. Once the burning process has completed, the LP 2 CD
will eject the CD and you will see the screen displayed
on the right. If you would like to burn another copy,
insert another CD-R and press [YES]. If you do not
wish to burn another copy, simply press [NO].
6. When you select [NO], you will see the screen
displayed on the right. Select [YES] if you would like
to erase all tracks currently stored in the Internal Flash
Player, or press [NO] if you wish to keep the tracks.
Note: For most applications, you may wish to erase
Internal Flash Player contents after each successful
transfer to CD. However, please ensure that the CD
was burned to your expectations before clearing the
Internal Flash Player contents.
Insert blank
CD-R disc

CD Burner
Burning CD...

CD Burn Complete
Burn Another?

CD Burn Complete
Clear Flash?

Menu: Switch to
Flash Player?


13
FREQUENTLY ASKED QUESTIONS
Question: Can I record from the turntable and from external audio sources simultaneously?
Answer: No. The LP 2 CD can only record from the turntable or from audio sources connected
to the Line In inputs, but not both simultaneously. This is to prevent unwanted mixing
of audio signals. The Phono / Line switch selects which source will be routed to the
internal recorder.
Question: Can I burn my vinyl records directly to CD?
Answer: You will need to record your music to the unit’s Internal Flash Player before you can
burn it to a CD. This approach allows you to correct any mistakes and perfect your
track transitions before committing your recording to a CD. It also as ensures that the
spinning of the CD drive does not introduce mechanical noise into your recordings.
Question: What CD formats is the LP 2 CD compatible with?
Answer: The LP 2 CD can play music from virtually any CD containing audio data. The LP 2
CD can only record music to CD-R. Please ensure that the CD you wish to record
contains the proper “Digital Audio Recordable” logo.
Question: How much data can the Internal Flash Player hold?
Answer: The Internal Flash Player on the LP 2 CD can hold about 700Mb of data; this equals
roughly 80 minutes of music. Please note, however, that the Internal Flash Player
also has a 99 track limit. We recommend that you wipe the player contents after each
successful transfer to CD.
Question: Can I listen to my music while recording it?
Answer: Yes, you can listen to your music while recording by connecting the unit’s Line Out to
a line-level input on a home stereo receiver. Alternatively, you can connect
headphones to the 1/8” headphone jack on the lower right corner of the top panel.
Question: Can I record audio from other devices?
Answer: Yes, you can record audio to the unit’s Internal Flash Player from virtually any line-
level audio source, such as tape or reel-to-reel players, connected to the Line In on
the rear panel.
Question: What is the purpose of the USB port?
Answer: The USB port allows you to connect the turntable to your computer and use the
included software to transfer music from vinyl or external line-level audio sources
directly to digital music. Please consult the included MixMeister Software Guide for
information on recording audio from the LP 2 CD into your computer.
Question: Do I need special software drivers when connecting the LP 2 CD to my computer?
Answer: No, the LP 2 CD is a plug-and-play device. This means that there are no special
drivers to install. When you connect the unit to your computer for the first time, it will
automatically load all the necessary components onto your system.
Question: With what operating systems is the LP 2 CD compatible?
Answer: The LP 2 CD is a plug-and-play device under Windows XP/Vista and Mac OSX
operating systems. If you would like to transfer your music to your computer, please
refer to the MixMeister Software Guide.

14
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
My recordings sound loud
and distorted. Recording level was too loud.
I can barely hear the
recorded audio when I play it
back. Recording level was too soft.
It is important to carefully set your recording level prior to
recording. When you first press [RECORD] to enter Rec
Ready Mode, please check the level metering on the
display. Use the RECORD LEVEL knob to adjust the
level. At the loudest moments of the music, the meters
should hit the (-4) or (-2) mark but should not reach
(MAX). If the level of the audio signal is too “hot”, you
will see (!) flash on the right side of the display.
My records are playing at an
unusual pitch. RPM switch not set correctly. Please set the RPM switch as appropriate for the record you wish to play (33/45/78).
I don’t hear anything when I
try to play or record audio
from my vinyl records.
PHONO / LINE switch set to
Line, instead of Phono.
Set the PHONO / LINE switch to Phono to play and
record audio from the turntable.
I don’t hear anything when I
try to play or record external
sources connected to the
Line In.
PHONO / LINE switch set to
Phono, instead of Line.
Set the PHONO / LINE switch to Line to hear and record
audio from the external sources connected to the Line
In.
Erase tracks from Internal Flash Player which may have
already been burnt to a previous disc. In general, we
recommend that you erase the player contents after
each successful burn.
I get a “Not enough space on
blank CDR” message.
Internal Flash Player
contents exceed the
maximum capacity of the CD-
R you are attempting to burn. Try a higher capacity CD-R. If using a 74min CD-R,
please try an 80min CD-R.
I get a “Too many tracks in
Flash to REC” message.
Erase tracks from the Internal Flash Player to free up
space.
I get a “Can’t Record Flash is
Full” message.
Internal Flash Player is filled
to capacity. Burn Internal Flash Player contents to CD-R, then erase
all tracks.
I can’t hear my record
playing.
LP 2 CD is already playing
audio from CD or from the
Internal Flash Player.
Press the [STOP] button to ensure that the unit is not
actively playing back or pausing a song.
Cartridge connection is not
secure.
Cartridge must be securely connected to the tonearm
whenever you are using the turntable.
I am experiencing poor sound
quality. Vinyl record is dirty or
scratched.
Try dusting off and gently wiping the surface of the
record before playing it.
Enable Auto Split in the Menu options and try again.
See “Internal Flash Player Menu Options” section for
details.
My recording came out as
one continuous, long track,
instead of individual tracks.
Auto Split menu option was
disabled. Use the [SPLIT TRK] to manually split your recordings
into individual tracks. See “Splitting Tracks in the
Internal Flash Player” section for details.
LP 2 CD HOT KEYS
BUTTON COMBINATION DESCRIPTION
RECORD + STOP Forces system to load an OS (Operating System) upon startup.
Please visit www.ion-audio.com regularly for updates.
RECORD + PLAY Restores the default system parameters.

15
GUÍA DE INICIO RÁPIDO
oAsegúrese de que todos los elementos abajo indicados estén incluidos en la caja.
oLEA EL FOLLETO DE INSTRUCCIONES DE SEGURIDAD ANTES DE UTILIZAR EL PRODUCTO.
oVisite http://www.ion-audio.com para registrar el producto.
INTRODUCCIÓN
Gracias por comprar este producto. LP 2 CD es la manera más rápida y sencilla de convertir la música de
discos de vinilo o fuentes de audio externas, tales como reproductores de casetes o cinta, en un CD o
guardarla directamente en su computadora. Con la función de división automática de pistas, el LP 2 CD
detecta los silencios entre temas y los separa en pistas individuales para su conveniencia.
MÉTODO DE GRABACIÓN 1 – A UN CD
Extraiga su álbum al reproductor flash interno y queme uno o más CD. Una vez
grabado su CD, puede escucharlo en el auto, en su casa, en su computadora o en
cualquier lugar donde haya un reproductor de CD estándar.
MÉTODO DE GRABACIÓN 2 – A SU COMPUTADORA
Use el software incluido para convertir automáticamente las pistas a su
biblioteca de iTunes* durante la reproducción. Una vez convertidas, puede
transferirlas a dispositivos de medios portátiles, como iPod* o grabarlas
quemando un CD con aplicaciones de grabación en CD de terceros.
SOFTWARE
Hemos incluido software EZ Vinyl Converter para ayudarle a convertir sus grabaciones de vinilo:
EZ Vinyl/Tape Converter (sólo PC) es la forma más rápida y fácil de convertir las grabaciones en medios
digitales. Este software guarda convenientemente sus grabaciones en la biblioteca de iTunes*. Es posible
que los usuarios novicios prefieran esta aplicación. En el CD, incluimos una práctica Guía de inicio rápido con
instrucciones paso a paso sobre la instalación y la operación del software.
EZ Audio Converter (Mac únicamente) es una aplicación de convertidor básica para Mac OS X, ideal para
usuarios novicios. Consulte en la Guía de inicio rápido del software incluida las instrucciones detalladas sobre
la instalación y la operación del software.
* iTunes e iPod son marcas registradas de Apple, Inc., registradas en EE.UU. y otros países.
ALFOMBRILLA
ANTIDESLIZANTE
ADAPTADOR PARA
45RPM CONTRAPESO PLATO
CABLE USB
CD
CÁPSULA
PREMONTADA
GIRADISCOS
LP 2 CD
MONTAJE DE LA TAPA
GUARDAPOLVO
CUBIERTA ANTIPOLVO

16
VISTA DEL PANEL TRASERO
43
2
1
1. Entrada de alimentación: Conecte el cable de alimentación incluido desde el giradiscos a un
suministro eléctrico activo.
2. Salida de audio USB: Use el cable USB incluido para conectar el giradiscos a su computadora. La
conexión USB provee el audio del giradiscos (o de las entradas de línea Line In, si el conmutador de
entrada Line/Phono (Línea/Fonográfica) del panel superior está en Line) a su computadora. La
conexión USB también entrega audio desde la computadora a través de las salidas RCA del
giradiscos. Para transferir sus discos de vinilo a la computadora, proporcionamos varios paquetes de
software diferentes en el CD incluido. Consulte en la sección “Software incluido” los detalles sobre las
aplicaciones de software incluidas.
3. Line Out (Salida de línea): Use un cable RCA estéreo estándar para conectar estas salidas a las
entradas de audio de su sistema estéreo hogareño. (Para tener en cuenta: igualmente se puede
copiar música en un CD o computadora, incluso si las salidas de audio del giradiscos no están
conectadas a un sistema estéreo).
4. Line In (Entrada de línea): Estas entradas RCA se usan para conectar reproductores de casetes o
cintas o cualquier otra fuente de audio de nivel de línea.
VISTA DEL PANEL FRONTAL
1
1. Lectora de CD: La lectora de CD del giradiscos funciona como reproductor o quemador de CD, según
sea el tipo de disco insertado en la bandeja. Cuando se usan CD finalizados no vacíos, la lectora
funciona como reproductor de CD, permitiéndole reproducir música a través de la línea de salida del
giradiscos o extraer pistas al reproductor flash interno (Internal Flash Player). Cuando se usan discos
CD-R vacíos, la lectora funciona como quemador de CD permitiéndole grabar el audio proveniente del
reproductor flash interno de la unidad (por ej., el audio extraído del giradiscos o de fuentes de sonido
externas conectadas a la entrada de línea).

17
VISTA DEL PANEL SUPERIOR
2
5
1
6
4
3
78
11
12
13
109
1. BOTÓN DE ENCENDIDO: Pulse este botón para encender y apagar la unidad.
2. PLATO: Este plato se debe ajustar firmemente al giradiscos antes de hacerlo funcionar. La correa de
transmisión del motor se puede encontrar en el aro impulsor debajo del plato. Vea en “Instalación del plato” la
información detallada sobre la instalación de la correa de transmisión del motor.
3. CONJUNTO DE BRAZO DE LECTURA: Consulte en la sección “Descripción del brazo de lectura” una
descripción detallada del mismo.
4. SOPORTE DEL ADAPTADOR PARA 45 RPM: Puede colocar aquí el adaptador para 45 cuando no lo usa.
5. BOTÓN DE ARRANQUE/PARADA: Con este botón se arranca y para el motor del giradiscos. Si parece que
no funciona, asegúrese que la correa de transmisión del motor esté bien instalada, como se explica en la
sección “Instalación del plato”.
6. PANTALLA: La pantalla le permite acceder a opciones de menú e información correspondientes a la
operación de la unidad.
7. BOTONES DE MENÚ Y FUNCIONES: Consulte en la sección “Botones de menú y funciones” una descripción
detallada de los mismos.
8. BOTONES DE CONTROL DE CD: Consulte en la sección “Botones de control de CD” la información más
detallada.
9. VOLÚMEN DE AURICULARES: Con esta perilla se ajusta el volumen de la señal para auriculares.
10. SALIDA PARA AURICULARES DE 1/8": A esta entrada se conectan los auriculares de 1/8”.
11. NIVEL DE GRABACIÓN: Con esta perilla se ajusta en nivel de la señal de audio proveniente del giradiscos o
de fuentes de audio conectadas a las entradas Line In del panel trasero.
12. CONMUTADOR DE ENTRADA FONOGRÁFICA/LÍNEA Con este conmutador se selecciona la señal de
audio de entrada. Coloque este conmutador en Phono cuando reproduce y transfiere sus grabaciones en
vinilo al CD o la computadora. Colóquelo en Line si desea transferir o escuchar música de fuentes de audio
externas conectadas a las entradas Line In del panel trasero.
13. CONMUTADOR SELECTOR DE 33 / 45 / 78 RPM: Coloque este conmutador en la posición apropiada
cuando reproduce discos. Si la música se reproduce con un pitch extraño o anormal, puede ser una buena
indicación de que se seleccionó un valor de RPM incorrecto.

18
1234
1234567
3
1
2
4
5
BOTONES DE MENÚ Y FUNCIONES:
1. [MENU] (Menú): Con este botón se introducen las opciones de menú
correspondientes al modo de operación en uso. Las opciones del menú CD Player
Mode (Modo de reproductor de CD) son Switch Mode (Cambiar modo), Copy Track
(Copiar pista), Copy All (Copiar todas), Repeat (Repetir) y System Info (Información
del sistema). Las opciones del menú Internal Flash Player Mode (Modo de
reproductor flash interno) son Switch Mode (Cambiar modo), Move Track (Mover
pista), Repeat (Repetir) y System Info (Información del sistema).
2. [DISPLAY] (Pantalla): Pulse este botón para recorrer las diferentes configuraciones de la pantalla de tiempo
del LP 2 CD: Elapsed (Transcurrido) (por defecto), Track Remain (Remanente de pista), Total Remain
(Remanente total). Este botón también funciona como botón de SELECCIÓN cuando se seleccionan opciones
del menú.
3. [ERASE] (Borrar): Este botón permite borrar pistas del reproductor flash interno. También funciona como
botón de NO cuando se seleccionan opciones del menú.
4. [SPLIT TRK] (Dividir pista): El LP 2 CD ofrece Auto Split, que detecta automáticamente los silencios entre
temas y divide la grabación en pistas individuales. Por defecto, Auto Split está activada. Si decide desactivar
esta función y dividir manualmente sus pistas, puede usar el botón [SPLIT TRK] entre temas para crear una
pista nueva. También puede realizar esta operación después de grabar su música (consulte la sección
“Cómo dividir pistas en el reproductor flash interno”). Este botón también funciona como botón de [SÍ] cuando
se seleccionan opciones del menú.
BOTONES DE CONTROL DE CD
1. [REW] (Rebobinar): Pulse este botón para
saltar a la pista anterior. Manténgalo
pulsado mientras reproduce una pista para
retroceder rápidamente.
2. [FF] (Avance rápido): Pulse este botón para saltar a la pista siguiente. Manténgalo pulsado mientras
reproduce una pista para avanzar rápidamente.
3. [STOP] (Parar): Pulse este botón para detener la reproducción y volver a la primera pista. Con este botón
también se detiene la grabación cuando extrae su música al reproductor flash interno.
4. [PLAY / PAUSE] (Reproducción/pausa): Pulse este botón para reproducir la pista seleccionada —se enciende
el LED verde de abajo del botón. Para hacer una pausa, púlselo nuevamente mientras se reproduce la cinta
—el LED verde destella durante dicha pausa. Púlselo nuevamente para reanudar la reproducción. Este botón
también inicia la grabación en modo Record Ready (Listo a grabar).
5. [RECORD] (Grabación): Pulse este botón para entrar al modo Record Ready. Este modo le permite grabar
audio proveniente del plato del giradiscos o de fuentes de audio externas conectadas a las entradas Line In del
reproductor flash interno (consulte la sección “Cómo grabar música en el reproductor flash interno” para
obtener más detalles). Cuando pulsa [RECORD], comienza a destellar el LED rojo de abajo del botón, para
indicarle que está listo a grabar.
6. [BURN CD] (Grabar en CD): Una vez que haya grabado su música en el reproductor flash interno, pulse este
botón para quemar el contenido del reproductor directamente en un CD-R vacío compatible (consulte la
sección “Cómo grabar el contenido del reproductor flash interno en un CD” para obtener más detalles).
7. [OPEN/CLOSE] (Abrir/cerrar): Con este botón se abre y cierra la bandeja de CD.
VISTA DEL BRAZO
1. Contrapeso y anillo de escala: El contrapeso se usa para balancear el conjunto del
portacápsula y la cápsula para que se le aplique la cantidad adecuada de presión de la púa
al disco.
2. Ajuste antideslizamiento: Esta perilla se usa para compensar las fuerzas de tracción hacia
adentro. Consulte INSTALACIÓN DEL BRAZO para ver más detalles.
3. Clip del brazo: Este clip diseñado especialmente fija el brazo mientras está en reposo o no
se usa. El clip ha sido diseñado para que permanezca hacia arriba mientras está
desbloqueado.
NOTA: Al transportar el giradiscos, siempre se recomienda retirar el portacápsula y sujetar
bien el clip del brazo para evitar daños al brazo o al giradiscos.
4. Tuerca de fijación del brazo: Esta tuerca de aluminio se usa para fijar el conjunto del
portacápsula y la cápsula al tubo del brazo. Consulte Instalación de la cápsula para ver más
detalles.
5. Cápsula y portacápsula: La cápsula está preinstalada en un portacápsula estándar. La
cápsula es reemplazable por el usuario y compatible con una variedad de cápsulas
estándar. Asegúrese de retirar la cubierta plástica transparente antes de hacer funcionar el
giradiscos con la cápsula.