iOttie Easy One Touch 5 User manual

Manual • Guide • Manuale •Handbuch •Manual
Easy One Touch 5
Cupholder Mount • Porte-gobelet • Supporto per portabicchieri •
Getränkehalterhalterung • Soporte para portavasos

Mount should be aligned so that all 3 spacers contact the inner wall of the cup holder.
Twist dial to extend spacers so they securely contact the inner wall of the cup holder.
At a Glance
Adjustable Foot
Foot Knob
Release Buttons
Proximity
Sensor
Charging
Light
Dashboard Pad
Auto Open Side Arms
Micro USB Port
Back View
Dual Car Charger with
Micro USB cable
Telescopic Knob
Cradle Knob
Getting Started
For optimal mounting and charging, please follow the detailed instructions
within this manual when using the Auto Sense Wireless Charging Mount.
iOttie is not liable for possible damages due to product misuse.
Critical Information
Mounting at a perpendicular angle
to the mount works best with the
proximity sensor.
If mounting at an angle, phone will
need to be very close to sensor for
arms to open.
Smartphone cases
Reflective Smartphone cases work best. Dark colored or textured cases do not
reflect light well, making it dicult for the Proximity Sensor to detect phone. If
using a dark colored or textured case, the phone will have to be very close to
mount for arms to open automatically.
Compatibility
Before using product, make sure your device is Qi Wireless compatible.
Compatible devices include iPhone X, iPhone Xs, iPhone XR, Samsung Galaxy
S10, S10+, Note9+, and Google Pixel 3.
Qi Wireless Charging in Vehicle
Use the included iOttie Car Charger and Micro USB Cable. If you do use
a third party car charger, use a Qualcomm Quick Charge 2.0 or equivalent
adapter to receive a wireless charge (with compatible devices).
Twis t Dial
Cable
Organizing Cap
Spacers
Universal
Ball Joint

3. Twist Dial to ensure spacers are
secure in the cup holder walls.
Top half of mount rotates 90 de-
grees for optimal viewing.
Mount rotates 360 degrees for
optimal viewing angles.
360°
90°
90% Charged
1. Plug the micro-USB cable into the
USB port on the back of the Mounting
Head.
2. Insert Car Charger into your
vehicle’s power port.
Connecting Power Adjusting the Mount
1. Foot Knob
Out of box, the foot knob is set to
regular sized phones. Foot will need
to be adjusted for plus sized phones
or cases with thicker bottoms.
Move the knob down until laser
etching is aligned appropriately as
shown in line drawing.
Using the Auto Sense Mechanism
Once it is unplugged or car is turned o, the Auto Sense’s internal battery
keeps a charge for up to one hour.
2. Once phone is placed in mount,
arms will automatically close after
one second. Qi wireless charging
will start immediately.
1. Side arms on mount automatically
open via silent step motor for one
second when phone is detected in
front of Proximity Sensor on mount.
Mounting and Charging

The Qi Receiver Coil is usually located in the center area of the phone. Check
with your phone's manufacturer for Qi coil location. Below are some examples for
commonly used phones.
Qi Alignment Guide
iPhone X iPhone XR iPhone XS Max
Auto Sense
Samsung
Galaxy S10
Samsung
Galaxy S10+
Samsung
Galaxy Note9
Auto Sense
For larger/plus phones or larger cases, knob on mount will need to be adju-
sted as indicated by laser etching on back for proper alignment with Qi coils.
The Qi coil on the mount is located at the top, above the iOttie logo. Please
follow the guide below to line up your phone with the device for an optimal
wireless charging.
3. Buttons under the light on both sides of
device can also open and close the arms. One
or both buttons can be pressed.
• The Auto Sense is powered via a micro-USB cable
and coil cell battery. There is no on/o switch on
the device. Once it is plugged in, the device will
remain on unless the vehicle shuts o power when
in parking mode.
Releasing Device Wireless Charger Specifications
INPUT DC 9.0V-1.67A
DC 5.0V-2.0A
CHARGING PORT MICRO USB
LENGTH 2.96"
WIDTH 2.75"
HEIGHT 3.74" (Foot not extended)
WEIGHT 4.16oz
Car Charger Specifications
MODEL NUMBER CHY-CC-U2CQ3C
INPUT DC 12V~24V
OUTPUT
MICRO USB CABLE LENGTH 120MM
DC
DC
DC
5V  3A
9V  2A
12V  1.5A
Charging Indicator
Solid Green Light Smartphone charging.
Blinking Red Light
Smartphone not charging.
Foreign object detected or
overheating of mount or smartphone.