iOttie HLCRIO132 User manual

Installation Instruction
1. Unpeel dashboard pad cover and place sticky side on desired dashboard location
2. Mount the sticky gel pad onto the dashboard pad and pull down the lever to secure the mount
into place

3. Plug micro USB charger into the charging port
4. Plug the adapter into the vehicles power source/cigarette lighter .

5. Press side buttons into locking position
6. Unscrew the bottom foot and move it up and down locating the propoer charging position,
tighten knob once found (Please note this is a one time step) .

7. Place your device inside the mount firmly to activate the one touch locking system.
8. Loosen knob to extend telescopic arm. Tighten knob in place at desired position.

9. Adjust cradle in any angle with ball pivot joint.