iPECS eMG80 Owner's manual

eMG80/100/800& UCP& vUCP
Administration & Programming Manual
Please read this manual carefully before operating the System.
Retain it for future reference.

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
Revision History
ISSUE
DATE
DESCRIPTION OF CHANGES
1.0
Sep., 2013
Initial Release
1.1
Dec., 2013
Changed Ericsson-LG to Ericsson-LG Enterprise
1.2
Feb., 2015
Update contents according to S/W integration for both eMG80 & eMG800
1.3
May, 2015
S/W version 1.2.x.
- On-line user guide
- Terminal attributes (Small popup use, large popup timer, SLT open-loop time)
- Web Access Authorization
- NTP attributes
- Digit Conversion Table
- System attributes
- U-LOOP, PBX code insertion for emergency call
- Disconnect with Inband information
- Temp License expiration notify
- Trace Log via Web
- Add System Date and Time to the Installation wizard
1.4
Jan., 2016
S/W version 2.0.x.
- Added Speed code number plan in PGM100.
- IPCR announce only for the incoming calls.
- Updated the Strong password in PGM 160/161.
- Updated ‘Do not overwrite station name in PGM 211.
- Added the Attendant ring mode in PGM 257.
- Added more items for Alarm in PGM 163.
- Added Flexible button default table (PGM 239)
- Added Preset flexible button default (PGM 240)
- Added System DST mode in PGM 439.
- Added LDAP server setting in PGM 160/161.
- Added the Arabic language.
- Updated Message wait indication LED in PGM 112.
- Updated Company directory in Station Name Display.
- Added Station User Greeting in Station Data.
- Added the search box in Maintenance.
- Added MOH Management in Maintenance.
- Updated the DB management by adding the Comment field.
- Updated Install wizard
- DTMF repeat tone has nothing to do with PSTN in PGM160-15
- Added Call wait signal and duration in PGM 113.
- Added some admin (Alternate/Secondary signal port, Local route ID, Remote
route ID, Sending Name option) in PGM 324.
- Added SLT Pulse and SLT pulse-MW type in PGM 110.
- Added Lift Handset for Page & Privacy in PGM 111.
- Added Short Modem in PGM 112.
- Added NFC Authorization Code uses in PGM 112.
- Added rel 180 after 183 and “Add ‘user=phone’param”in PGM 133.

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
- Added Short Modem Timer in PGM 182~182, 186
- Added the Alarm mode to send email to the address in PGM 163.
- Added the special character to DB management.
- Added the Ring detection register setting in the Analog parameter.
- Added LCD Dimming for LIP-9000 Series & LDP-9240D in PGM 112.
- ‘Go to assignment’function added to Personal group overview and can check
the master & member list at a glance.
- Added the Station ICR scenario (1201) to Station Data.
- Change the name from UCS Standard to UCS data.
- Added MOH management in Maintenance.
- Added Keyset admin password to Install Wizard.
1.5
Apr, 2016
S/W version 2.0.x.
- ‘Unified SMB A&P manual’by integrating eMG and UCP.
1.6
Aug, 2016
S/W version 2.1.x.
- The type of Speed numbering is added more in PGM 100.
- ‘DDNS usage of Firewall’&‘Domain name of Firewall’is added in PGM 102.
- The LCD LED is changed to the option ‘MWI/Ring’or ‘Ring.’
- The ACD & CRM function is added for UCS Client: CRM function and ACD
login/out & ACD On/Off duty in PGM 112.
- UCS Dialing Rule Use for Standard UCS in PGM 112.
- UCS Mobile Dial Use (Android) for Standard UCS in PGM 112.
- The description of the CLI Name Display is changed. Refer to PGM 113.
- Display full CLI function is added in PGM 113.
- SMTP Server Address fills out up to 64 characters in PGM 127.
- Proxy Server Address fills out up to 64 characters in PGM 133.
- The range for ICLID Usage is changed to Disable, CLI, Name/CLI in PGM 140.
- Web hacking block is added in PGM 160; Web admin login failure count to block,
Web admin hacking block period, Wed admin hacking Email notification.
- UCS Ring ACK count is added in PGM 160, and UCS Ring ACK timer is added
in PGM 180.
- SLT Line monitor and SLT Line Monitor time are added in PGM 160.
- Dial Back to Caller from Remote VM Access is added in PGM 160.
- The Alarm Display is added in PGM 163.
- The range about Alarm is changed to Off, On, Alarm only, Alarm/Email.
Especially, the default of Maintenance Expire Notify is Email only.
- Message wait (Call back) for LED flash is added in PGM 170.
- Outgoing Call type is added for All calls or Answered calls in PGM 177.
- Call log/Directory Auto Idle Timer is added in PGM 180.
- The range of Hot Desk for eMG and UCP is changed in PGM 250: eMG80 (100),
eMG800 (300), UCP (1200).
- The advice of Charge is added in PGM 133.
- SIP Profile is added in PGM 211.
- Signaling port, TLS Version, First & Second TLS crypto, SRTP usage, First &
Second SRTP crypto are added in PGM 212.
- The Interworking system is added in PGM 322.
- The Name option is deleted in PGM 327.

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
- The Alarm display is added in PGM 335.
- Firewall IP is added in PGM 441.
- MS Excel-like table data management is to be extended.
- User Greeting is added to Maintenance.
- Company Directory is added to Maintenance.
- Web Certificate is added to Maintenance.
- Custom 1 and Custom 2 are added in Web Access Authorization and User
management.
- Line Echo added to SLT attributes in PGM 112.
- DSS in use added to LED Flashing Rates in PGM 170.
1.7
Nov, 2016
S/W version 2.2.x.
- The search box is enhanced by adding an Attribute search and highlighting the
result.
- The virtual registration is available for up to 25 devices at one time and can
copy/paste/drag like excel.
- ‘DSS LED service’for indicating the other station status is added in PGM 111.
- ‘Collect call block’is added in PGM 111.
- ‘Add 1st CO Group Access Code in Call log’is added in PGM 113.
- Call Log Attribute is added in PGM 113.
- ‘Dial Digit’is added as the flexible button type in PGM 115/129.
- The checkbox is added in PGM 117, PGM 118, and PGM 119.
- The call forward type in PGM 120 is updated; changed Unconditional to Internal
Unconditional and added External Unconditional.
- Station ICR Scenario (PGM 1201) is updated about Call Profile Usage, Call
Profile Timer, and Call Profile Apply Option.
- Station CLI Program is added to Station Data.
- CID/CPN Attributes (PGM 151) added.
- Alarm Receiver E-Mail Address (To) & Notification E-Mail Address (To) is
updated in PGM 160~161.
- Resource Monitoring is added in PGM 160~161.
- ‘Display Forward Reason’is added in PGM 160~161.
- ‘CCR No Digit Error Timer’is added in PGM 180~182, 186.
- Net Station as CO Type is added in System Speed Dial.
- LIP-9050S and LIP-9071S are added to CONF TYPE in PGM 212.
- ‘Changed CLI’is added in PGM 270.
- ‘Register LM Device directly’is added in PGM 331.
- ‘Use Firewall IP’is added in PGM 441.
1.8
Jan, 2018
S/W version 3.0.x.
- virtualized UCP
- Mitel PMS Interface
- User Base License
- Multi-login support
- Push service for iOS/Android mobile
- Automatic failover for UCS Premium
- Automatic failover for LIP-9000 (IPKTS)
- Multi-zone for WTIM4/8 and WTIM24

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
- User password length control
- Access Control on PGM / MENU buttons
- Improve UI of Message
- The automatic alarm call and play a pre-recorded announcement
- Emergency Page option
- Outbound PRI Name Display
- EXEC/SEC - add secretary call option
- SMDR info for the incoming call to a group
- Add an option for video call
- Add base call cost option
- Analog CO Call Charge with NPR metering
- Add an option for built-in VM/VOIP channel (eMG80)
- RTP/SRTP SSRC filtering
- PPP over ISDN (eMG80/800)
- CIQ Alert Announcement in case of being CPU Redundancy
- Print Destination in CLI Print
- Add '+' in Outgoing Call in SIP
- SIP Name Display
- Improved LDAP Attributes
1.9
July,2018
S/W version 3.1.x.
- “Config Encryption”
- Added “Conference room expansion.”
- Add "USB serial usage."
- Change the Range of Web Admin Login Failure count to block
- Change the length of the max characters of "E-Mail Account Password."
- Added "UCS PUSH POLLING Use"
- Add "Key Pad Tone" option
- Removed the “Cascade Apply Type”
- Added “Clear Missed Call Log”
- Change the length of the max characters of "E-Mail Account Password."
- Changed the range of “Ring Group Indication.”
- Added "T1 Timer"
- Change to max 64 characters of the email address field
- Change to max 32 characters of the unique ID field
2.0
Jan,2019
S/W version 3.5.x.
- Added " Phone Lock/Unlock, "Flexible Page Prefix”
- Added “Auto Transfer By Button To Last Call" and “DTMF tone for Flexible
button” at the Tone/Ring Attributes
- Added “PHONE Lock Status(Force to Set), “PHONE Auto Lock Usage,” “PHONE
Auto Lock Timer,” “PHONE Lock Action for Hot-Desk,” “Allow to Stop - Flexible
Paging”
- Added " Coverage Call Log, "Page Call Log,” “Busy/DND/VM Log”
- Added “REST API Service Port,” “REST API Session Timeout,” “Security (option
for MSVC XML Port),” “CALL TRACKING Enable,” “SLT conference hook switch
time.”