Iron Horse WL550 User manual

INSTRUCTIONS
4
WL550
CPIN0002116/2
FLUORESCENT
WORKLIGHT
55W
energy efficient
TECHNICAL DATA
Specifications
Input Voltage 230-240V AC, 50Hz
Supply Current 0.25A
Max Watt 55W
IP Classification IP44
Power Factor 0.995
Replacement Globe 3U 55W Max Compact Fluorescent Lamp
Arlec Part No: FT55
Protective Shield Glass Lens (325 x 205 x 5mm thick)
Arlec Part No. SS2039
Construction
Enclosure Zinc / Aluminium alloy
Glass / Lens 5mm thick tempered safety
Reflector 0.3mm aluminium
Colour Blue
WARRANTY
Arlec guarantees this product in accordance with the
Australian Consumer Law.
Arlec also warrants to the original first purchaser of this
product (“you”) from a retailer that this product will be free
of defects in materials and workmanship for a period of 12
months from the date of purchase; provided the product is
not used other than for the purpose, or in a manner not
within the scope of the recommendations and limitations,
specified by Arlec, is new and not damaged at the time of
purchase, has not been subjected to abuse, misuse, neglect
or damage, has not been modified or repaired without the
approval of Arlec and has not been used for commercial
purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own
expense, return the product, and provide proof of original
purchase and your name, address and telephone number, to
Arlec at the address below or the retailer from whom you
originally purchased the product within 12 months from the
date of purchase.
Arlec will (or authorise the retailer to) assess any claim you
may make on the Warranty in the above manner and if, in
Arlec’s reasonable opinion, the Warranty applies, Arlec will
at its own option and expense (or authorise the retailer to)
replace the product with the same or similar product or
repair the product and return it to you or refund the price
you paid for the product. Arlec will bear its own expenses
of doing those things, and you must bear any other
expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you
may have under a law in relation to the product to which the
Warranty relates.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
For All Sales & Warranty Enquiries
Arlec Australia Pty. Ltd. ACN 009 322 105
(“Arlec”) gives the Warranty.
Building 3, 31 – 41 Joseph Street,
Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Customer Service: [phone]
Email: [e-mail]
© This instruction leaflet is subject to copyright and must not be reproduced,
copied or otherwise used in any way or for any purpose without the consent
in writing of the owner, Arlec Australia Pty Ltd (A.C.N. 009 322 105). CPIN002116/2
WL550_Instructions REV.indd 1-2 25/11/11 1:18 PM

1. The CFL tube is supplied and packed separately to avoid damage.
2. Ensure that worklight is unplugged from wall socket.
3. Open the worklight housing by releasing the toggle latches.
4. The glass front of the housing will hinge forward and down.
5. Insert the tube in the holder, ensuring that you do not touch the
glass envelope of the tube with bare hands.
6. Close glass front.
7. Your worklight is now ready to use.
Please observe the following do's and don'ts to ensure safe and trouble free use:
DO use the handle to adjust the beam.
DO keep the worklight out of reach of children when in use.
DO switch off and allow to cool for a minimum of 10 minutes before storing.
DON’T stand worklight in pools of water.
DON’T handle with wet hands or operate when standing on wet surface.
DON’T allow power cable to come into contact with front of worklight or housing.
DON’T allow overhanging shrubs or foliage to come into contact with worklight.
DON’T place or operate the worklight closer than 5 metres to a swimming pool or spa.
DON’T operate the worklight with the front of housing opened.
The Ultra-Cool Portable 55W Compact Fluorescent Lamp (CFL) Worklight WL550 is suitable for indoor
(ambient temperature 25˚C) or temporary outdoor use. The worklight can be plugged into a standard
power point and has a weatherproof classification of IP44.
Assemble the unit as shown in diagram. Fix support
bracket onto base stand using the bolt, washer
and wing nut. Ensure that the wing nut is tight and
firmly holds the support bracket and base stand
assembly.
Side wing knob allows adjustment of the tilt of the
worklight body on the support bracket.
NOTE: The safety adjustment stop prevents
worklight head from tilting too far forward.
This helps avoid accidental scorching or
burning. Do not remove support bracket from
worklight body.
When adjusting the worklight tilt, tighten the
side wing knob with finger pressure only, do not
over tighten.
While adjusting the lamp head avoid pinching or
bending of the supply cord.
WARNING:
When the worklight is operated outdoors the
supply plug must be appropriately covered or
located such that it is subjected to indoor
conditions only.
If the external flexible cable or cord of this
worklight is damaged:
Contact the Arlec Customer Service Team
(Refer to details on back page)
or a similar qualified person in order to avoid hazard.
INTRODUCTION
2 3
INSTALLING CFL TUBE
OPERATION
DO'S AND DONT'S
Support
Bracket
Carry Handle
Toggle
Latch
Bolt, Washer
& Wing Nut
H Base Stand
Adjusting Wing Knob
Easy adjustment of
Lamp Head
Toggle
Latch
WL550_Instructions REV.indd 3-4 25/11/11 1:18 PM