ISLANDSAFE QT25 Series User manual

PRODUCT SPECIFICATION
GETTING STARTED SETTING UP ACCESS CODES
Connect the emergency
battery box into the power
jack inlet.
Enter the Default User Code
“1234”, Press # to confirm.
1 2 3
4 5 6
789
*0#
1
1 2 3
4 5 6
789
*0#
2
Rotate the knob clockwise to
open the safe door.
Locate the battery compart-
ment on the back of the door.
Install four AA batteries.
1 2 3
4 5 6
789
*0#
34
To Open the safe for the first time, use the emergen-
cy key provided.
After opening the safe, wait
for the light puts out, press the
reset button once.
Yellow light flashes twice,
input a new passcode (3-8
digits), Press “#” to confirm.
1
1 2 3
4 5 6
789
*0#
2
Yellow light flashes twice
indicating that your new
passcode has been accepted.
Close the door, then rotate the
Knob counter-clockwise to
close the safe.
1 2 3
4 5 6
789
*0#
3
1 2 3
4 5 6
789
*0#
4
LOW BATTERY & EMERGENCY BATTERY BOX
If battery’s low (red light indicator flashes) or dead,
please replace fresh batteries.
To open the safe for the first time, use the emergency
battery box provided.
Press the keyhole cover on
the panel to open the cover.
The cover will open and
key hole will reveal.
Insert the emergency key into
the keyhole. Turn the key
counter- clockwise.
Do not Release the key.
1 2 3
4 5 6
789
*0#
12
Hold the key, and turn the
knob clockwise.
Pull the door to open the safe.
1 2 3
4 5 6
789
*0#
3 4
SETTING UP ACCESS CODES
After opening the safe, double
click “0” on the safe panel.
Wait for the light puts out,
press the reset button once at
the back of the door.
1 2 3
4 5 6
789
*0#
12
Yellow light flashes twice,
input a new passcode (3-8
digits), and press # to confirm.
Yellow light flashes twice
indicating that your new
passcode has been accepted.
1 2 3
4 5 6
789
*0#
3
1 2 3
4 5 6
789
*0#
4
Open the emergency battery
box cover. Install four AA
batteries into the emergency
battery box.
Insert the cable into power
jack outlet. Yellow light will
flash. Then enter your
passcode, press # to confirm.
open
1 2
Hold the key, and turn the
knob clockwise.
Install four AA batteries into
the battery compartment on
the back of the door.
1 2 3
4 5 6
789
*0#
3
1 2 3
4 5 6
789
*0#
Green
light
Red light
Yellow
light
Knob
Digits
Key slot Battery box slot
1. Mounting holes
2. Removable shelf
3. Reset button
4. Anti-pry bolt holders
5. Carpeted interior
6. Interior light
7. Battery
compartment
8. Bolts
User
Manual (x1)
456
123
789
*
0
#
AA
Batteries (x4)
Mounting
Bolts (x2)
Emergency
Keys (x2)
Emergency
Battery Box (x1)
1 2 3
4 5 6
789
*0#
4
Default User Code: 1234
1 2 3
4 5 6
789
*0#
To set up admin code: Default Admin Code: 78668
To set up user code: Default User Code: 12345
11”
9.8”
13.7”
4.7”
4.7”
1
4
3
6
78
5
2

456
123
789
*
0
#
R
USER’S MANUAL
MODEL : IS-QT25
MILITARI QT25 SERIES
An instruction manual is available at:
https://www.islandsafe.co/manuals
Video Tutorial
Please follow us on our
social media platforms
for news and updates!
islandsafe
islandsafeco
3 Continuously false entries will activate the alarm, and
automatic system lock for 20 seconds.
6 Continuously false entries will activate the alarm, and
automatic system lock for 5 minutes.
The keypad will be disabled during the alarm. Stop the
alarm by opening the safe with emergency key and
power-cut by removing the battery.
ALARM FUNCTION
BOLTING DOWN THE SAFE
Mark and use 12mm drill bit to
drill two 2-inch-deep holes for
the bolts.
(distance = 7.2” or 18.5cm)
Separate the bolts from the
plugs by turing the bolts
counter-clockwise.
7.2”
12
Insert the plugs into the holes
on the wall.
Place the safe into position.
Make sure the safe holes in
align with the wall holes.
34
Secure the bolts through the
safe, into the holes.
Make sure the safe is mounted
in place, and all the bolts are
tighten correctly.
5
WALL
6
Pick a secure location for your safe. A concrete wall
is preferred. Please do not store the emergency keys inside your
safe!
Keep a record of your key number and serial
number in a secure place seperate from your safe.
The backup key is for emergency use only in the
event of forgotten passcode.
Don’t use this product near the water.
This Safe is not designed to be a fully Fireproof safe
or to stand against moisture.
To prevent leakage of liquid from damaging the
electronic system, we recommend to remove or
replace the batteries with fresh ones in case the
safe is not used for long time.
Keep away from children.
WARNING SAFETY
CUSTOMER SUPPORT
Islandsafe is encouraging you to write a review
sharing your experience with the product. Please
visit: amazon.com/review/review-your purchases#
You are covered for limited warranty support. For
more details visit:
https://www.islandsafe.co/warranty
For general inquiries concerning your ISLANDSAFE
products, or for further information, please contact
our customer service department.
[email protected]
islandsafe.co