iwc UNDINE HD.RETRO.VAR.2X4 User manual

‘Plug & Play’ quick mounting manual - HD Outside Wash - Various Positions - art.no. HD.RETRO.VAR.2x4
Outside Bird Washer (Chicken)
HD OUTSIDE WASH - VARIOUS POSITIONS PL008
‘PLUG & PLAY’ QUICK MOUNTING MANUAL
®
UNDINE
CLEANING TECHNOLOGY
Article No.: HD.RETRO.VAR.2X4
V2019-2

‘Plug & Play’ quick mounting manual - HD Outside Wash - Various Positions - art.no. HD.RETRO.VAR.2x4
INTRODUCTION
ASSEMBLY GUIDE SYMBOLS
Bolt/screw
Welding
Liquid gasket
(included in package)
Spare gasket rings
for use in the UNDINE®
unit are included.
MAINTENANCE
This is the ‘Plug & Play’ quick mounting manual for the:
IWC/UNDINE® Inline Outside Bird Washer (Chicken)
Type IWC Outside Wash, art.no. HD.RETRO.VAR.2x4
The working principle of this equipment is based on the unique UNDINE® water/air mixing technique.
See for details of this technique our introduction movie at www.iwc-international.com
Installation must be performed by qualified technical personnel familiar with poultry slaughter- and
cleaning systems.
Start by checking all parts are available as mentioned in the part list on the next page.
SPECIFICATIONS
Consumption Pressure
900 - 1400 ltrs/hour 10 barWater
Air 200 ltrs/min 6 - 8 bar
(actual size)
If the water- and airpressure as
advised are not applied,
the equipment may not function in
accordance with your requirements.
IMPORTANT NOTICE
• Check horizontal level
• Prevent heat or burn damage
1. WELD UNIT TO LINE
2. ADJUST ANGLE AND HEIGHT
2x
Always avoid any contact
possibility between the
nozzles and the birds/shackles!
CAUTION
CAUTION

‘Plug & Play’ quick mounting manual - HD Outside Wash - Various Positions - art.no. HD.RETRO.VAR.2x4
INTRODUCTION
ASSEMBLY GUIDE SYMBOLS
Bolt/screw
Welding
Liquid gasket
(included in package)
Spare gasket rings
for use in the UNDINE®
unit are included.
MAINTENANCE
This is the ‘Plug & Play’ quick mounting manual for the:
IWC/UNDINE® Inline Outside Bird Washer (Chicken)
Type IWC Outside Wash, art.no. HD.RETRO.VAR.2x4
The working principle of this equipment is based on the unique UNDINE® water/air mixing technique.
See for details of this technique our introduction movie at www.iwc-international.com
Installation must be performed by qualified technical personnel familiar with poultry slaughter- and
cleaning systems.
Start by checking all parts are available as mentioned in the part list on the next page.
SPECIFICATIONS
Consumption Pressure
900 - 1400 ltrs/hour 10 barWater
Air 200 ltrs/min 6 - 8 bar
(actual size)
If the water- and airpressure as
advised are not applied,
the equipment may not function in
accordance with your requirements.
IMPORTANT NOTICE
• Check horizontal level
• Prevent heat or burn damage
1. WELD UNIT TO LINE
2. ADJUST ANGLE AND HEIGHT
2x
Always avoid any contact
possibility between the
nozzles and the birds/shackles!
CAUTION
CAUTION

‘Plug & Play’ quick mounting manual - HD Outside Wash - Various Positions - art.no. HD.RETRO.VAR.2x4
3. CHECK NOZZLE DIRECTION
4. HOOK UP AIR
AND WATER LINES
All nozzles must be
leveled in vertical direction
!
8x
water
air
1. Close all valves before connecting to air and water
2. Apply water and air pressure
3. Open water valve, until water hits the product
4. Open air valve, until a powerful and regular flow appears
STARTING UP THE EQUIPMENT

‘Plug & Play’ quick mounting manual - HD Outside Wash - Various Positions - art.no. HD.RETRO.VAR.2x4
3. CHECK NOZZLE DIRECTION
4. HOOK UP AIR
AND WATER LINES
All nozzles must be
leveled in vertical direction
!
8x
water
air
1. Close all valves before connecting to air and water
2. Apply water and air pressure
3. Open water valve, until water hits the product
4. Open air valve, until a powerful and regular flow appears
STARTING UP THE EQUIPMENT

‘Plug & Play’ quick mounting manual - HD Outside Wash - Various Positions - art.no. HD.RETRO.VAR.2x4
SUPPORT AND CONTACT INFORMATION
If you have questions about the assembling procedure of this equipment
or any technical problem concerning our products, please contact us at:
IWC-Innovative Water Concepts
Bedrijfsweg 38
8304 AZ Emmeloord
The Netherlands
Email: [e-mail]
Phone: [phone]
The general terms and conditions of the Koninklijke Metaalunie shall apply.
Copyright © IWC-Innovative Water Concepts. All rights reserved.
Bedrijfsweg 38 - 8304 AZ Emmeloord - The Netherlands [phone] [e-mail] www.iwc-international.comT E W