Jabra Pro 9470 Mono User manual

Jabra Pro 9470 Mono
How do I perform a soft reset of my Jabra Pro 9400 series
headset?
To manually reset your Jabra Pro 9400, follow these steps.
1. Unplug the base power supply from the power outlet.
2. Remove the headset from the base.
3. Press and hold (5 seconds) the Multi-function button until the LEDs on
the boom-arm rapidly blink red and turn off. Then release the button.
Multi-function button
LED
4. Place the headset back onto the base.
5. Plug the base power supply into the power outlet again. The soft reset
is now completed.
29/06/2021 17:12
https://www.jabra.fi/supportpages/jabra-pro-9470/9470-26-904-101/faq/f935d621-6fd2-
4dcd-b24b-c34a9fd85fc7
Sivu 1 / 2

Note:
In rare cases, it is possible that after manually resetting the headset, the
software in the headset hangs so the <29>Multi-function</29> button on
the headset stops working. If this happens, remove the battery from the
headset for a minimum of 10 seconds.
For guidance on removing the battery, see the <32>Quick Start Guide -
Battery Kit</32> in the <35>Product Documents</35> section. Use a
suitable screwdriver to remove and reinsert the battery. This does not
affect the product warranty.
<36/> How do I manually reset my Jabra Pro 9400 Series headset?
29/06/2021 17:12
https://www.jabra.fi/supportpages/jabra-pro-9470/9470-26-904-101/faq/f935d621-6fd2-
4dcd-b24b-c34a9fd85fc7
Sivu 2 / 2