Jason.L Just Right 2P Workstation H-Bench User manual

ASSEMBLY INSTRUCTIONS
Just Right
2P Workstation
H-Bench
Tools Required: Power screwdriver 2 persons required for installation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
1200x700 1400x700 1600x700

C
D
D
1
2
2
Ex8
A
5x5
3
1
E
8
1
A
11
2
1
3
4
5
6
7
9
10
A
E
5
8
F
D
G
13
20
8
8
B
1
1
2
8
x8
14
15
16
A
4x4
6 7 8 11
9
1 2 3 4 5
11
10
11
13 11 14 11 15
11
11 11 12
11
16
12
3
A
Accessory list
Attention: The drawings below are only for reference which might be
slightly different from the actual object, please in kind prevail. Any
tools missing or installation problems, please contact the customer
service firstly.
No. SpecImage Qty
Allen key
2.5x2.5mm
Allen key
4x4mm
Allen key
5x5mm
ST4.2
M4
M8
M8
M6
Wrench
Technical data
70kg
690-1190mm
850-1290mm
Column QTY
Max Loading
Capacity
Height Range
Length Range
Frequency
2
25
Input Voltage
Max Speed
Temperature
100-240
10%(Continuous operation for 2 mins at most after pause for 18 mins)
Packing List
Right Lifting Column x2 Left Lifting Column x2 Connecting Beam x2 Cover x4 Supporting Beam x2
Supporting Plate x4 Transmission Rod x2 Baffle x4 Adapter x2 Handset x2
Power Cable x2 Ratchet Wrench Switch Line x2 Cable Tie x8
ST4.2X19 Screws x4
(packaged in 2 packs)
Adapter Hook x2
Ratchet
Wrench
Install Connecting Beam
Install connecting beam(3), use ratchet wrench (13) to tighten.
Use ratchet wrench (13)
to tighten the screws
Attach the
cover.
Install Supporting Beam
Adjust the length of the supporting beam (5)
according to the dimension of the tabletop.
Connect the supporting beam(5) and left and right lifting columns (1)&(2)
with screws(E), use the allen key (A) to tighten.
Stretch
Unscrew

Fx8
F
A6
1
2
1
2
7
A
2.5x2.5
A
A
5x5
12
5
12
Bx20
B
A
4x4
A
5
7
G
Cx8
A
2.5x2.5
A
8
C
5
9
12
8
10
G
x4
16
16
16
5
STEP6
STEP7
STEP8
Install Transmission Rod
Insert
Rotate
Tighten
Do not rotate the angle
exceed 120°
Connect transmission rod(7) with column (1) & (2), use the allen key (A) to
tighten the screws.
Unscrew
Insert
Install Supporting Plate
Connect supporting plate(6) with columns (1) & (2) , use
the allen key(A) to tighten the screws (F).
Install Adapter Hook
Buckle the adapter hook (12) on the supporting beam(5).
Adjust the length of the supporting beam (5)
according to the dimension of the tabletop.
The handset should be located on
the side of the column with the motor.
The distance between the two
sides shall not be longer than 200mm.
Fix the tabletop with screws(B), connect the handset(10) with the
screws(16), and use a pistol drill to tighten the screws.
Tighten the Screws on Beams and
Nuts on Transmission Rod
Use the allen key (A) to tighten the four screws on the
supporting beam(5), and use the wrench (G) to tighten
the nuts on transmission rod(7).
Install Baffle and Adapter
Use the screw(C) to assemble baffle (8) to
supporting beam(5), use the allen key(A) to
tighten the screws.
Insert
Self-Prepared
Install Tabletop and Handle

9
1
2
1
11
11
2
21
9
STEP9
Connect all Wires to the Adapter
Do not connect the power
until the wiring is completed
Use the cable tie (15) to fix the cables
on the table to keep the cables organized.
DC: Switch Cord Port
M1: Motor Wire Port
Tear Manage Fix
Method
The desktop could not function
Rising in a low speed
The desk moving downwards
without any operation
Automatically Self-Reset
The following tips will help you detected and eliminate the common fault and
error. If the fault you met is not listed below, please contact with your supplier.
Only the manufacturer and professionals are capable for investigating and
correcting those fault and error.
Fault phenomenon
Go down but not go up or go up
but not go down
The upper and downward
height is not enough
The desk could not lifted
Overwork
(Duty cycle: Max 2min on/18min OFF)
Check if all the cables well
connected;
Check if overloaded,
max loading: 70kg;
Reset;
Restart after suspend for 18mins while
connecting with power.
Attention
1. Power supply: AC100V-240V,50/60Hz
2. Service Environment: 0-40℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet
dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose
the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so
dispose of it in accordance with each country's environmental legislation, not the
general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when
playing, so any dangerous consequences caused by this improper action will not be on
manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not
have any effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure
that the cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g.,
do not litter the tools around. Always be careful to treat the packaging materials in order
to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
14. Keep the original package of the equipment if necessary in case of the future use in
transportation.
This marking indicates that this product should
not be disposed with other household wastes.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.