Javad JLink LTE Setup guide

How to setup JLink LTE to provide RTK data received via NTRIP
Client to UHF.
The purpose of this document is to describe how to configure JLink LTE to provide RTK data received
via NTRIP C ient to UHF.
The fo owing are the steps of configuration of JLink LTE:
 Connect to JLink LTE via web interface (For more detai see document “JLink LTE User
Manua ”).
 Ce u ar (GSM ) configuration
◦In the Communication/GSM tab. Set the PIN code and APN parameters (if necessary) (see
Picture 1).
◦P ease use tweezers to insta or remove micro SIM card see (see Picture 2.a).
◦Insert the SIM card to its s ot. The first s ot from the green top cover is for micro SIM, the
second s ot is for micro SD (see Picture 2.b).
◦In the Communication/Power Management tab activate the GSM interface (see Picture 3).
And wait for registering in the network and Internet access avai abi ity . Detai ed connection
status you can check in Status/GSM tab (see Picture 4).
It is possib e a so to connect JLink LTE to Internet via LAN or Wi-Fi using any Wi-Fi router, MiFi
device or even smart-phone configured in hot spot mode.
Picture 1. JLink LTE GSM conf igu r at ion tab

a) b)
Picture 2. JLink LTE micro SIM card installation rocedure
Picture 3. J li n k LTE P o we r Mana ge ment ta b

Picture 4. JLi nk LTE G S M Stat u s ta b
 Setup UHF
◦In the Communication/UHF Int. tab se ect Modem parameters (see Picture 5).
◦In the Communication/Power Management tab activate the UHF interface
(see Picture 3).

Picture 5. J li n k LTE UHF Int. tab
 Setup Data Router
◦In the Setup/Router tab se ect fo owing parameters “NTRIP Client” as Source and
“UHF“ as Destination.
C ick “Save Setting” button and wait unti finish (see Picture 7).

Picture 7. J Link LTE NTRIP Da ta Route r tab
 Setup NTRIP C ient
◦In the Services/NTRIP tab set fo owing parameters:
“Server name/address”, “Port”, “User” , “Password” .
C ick “Save Setting” button and wait unti finish.
C ick '”Update” button and se ect “Mountpoint” .
C ick “Save Setting” button and wait unti finish (see Picture 8).
Detai ed connection status you can check in Status/NTRIP tab (see Picture 9).

Picture 8. JLi n k LTE NTRIP configura t ion ta b

Pic t ure 9 . J Link LTE Status NT RIP tab