Javad JLink LTE Setup guide

How to setup JLink LTE as hotspot.
The purpose of this document is to describe how to configure JLink LTE as hotspot.
The following are the steps of configuration of JLink LTE:
 Connect to Jlink LTE via web interface (For more detail see document JLink LTE User Menual”).
 Insert SIM card (For more detail see document JLink LTE User Menual”).
 GSM configuration:
◦In the Communication/GSM. tab. (see Picture 1):
- setup GSM network conguration parameters if it is nee e .
Picture 1. JLink LTE GSM para mete rs configura t i on t ab
◦In the Communication/Power Management tab activate the GSM mo ule
(see Picture 2)

Picture 2. J Link LTE Power Ma n a ge ment tab
◦Detaile connection status you can check in Status/GSM. tab (see Picture 3)
Picture 3. J Link LTE GSM. Sta t us t a b

 Setup GSM as first priority interface:
◦In the Communication/Advanced tab select First Priority” parameter as GSM.
Click Save Setting” button and wait until finish (see Picture 4).
Picture 4. J Link LTE dvanced tab
 Reboot device
◦In the Administration/Management tab click Reboot” button and wait until reboot
(see Picture 5).
Picture 5. JLi nk LTE dministration Management ta b
 Setup WIFI AP
◦In the Communication/Wi-Fi tab select parameter Adapter mode” to AP”.
Click Save Setting” button and wait until finish (see Picture 6).

Picture 6. JLink LTE WIFI confi gura tion tab.