JBL SDR-35 User manual

QUICK START GUIDE
IMMERSIVE SURROUND SOUND PROCESSORS
SDR-35/SDP-55

QUICK START GUIDE
EN
IMMERSIVE SURROUND SOUND PROCESSORSIMMERSIVE SURROUND SOUND PROCESSORS
Please be sure to check www.jblsynthesis.com for the latest version of this guide, Firmware updates, and other support material.
SDR-35/SDP-55

EN-2
Safety Guidelines
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Donotinstallnearanyheatsourcessuchasradiators,
heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug.
A polarized plug has two blades with one wider
than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Useonlywiththecart,stand,tripod,bracket,ortable
specified by the manufacturer, or sold with the
apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-
over.
13. Unplugthisapparatusduringlightningstormsorwhen
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Object or liquid entry
WARNING – Take care that objects do not fall and
liquids are not spilled into the enclosure through
any openings. The equipment shall not be exposed
to dripping or splashing. Liquid-filled objects such
as vases should not be placed on the equipment.
16. Climate
The equipment has been designed for use in
moderate climates and in domestic situations.
17. Cleaning
Unplug the unit from the mains supply before
cleaning.
The case should normally only require a wipe with
a soft, lint-free cloth. Do not use chemical solvents
for cleaning.
We do not advise the use of furniture cleaning
sprays or polishes as they can cause permanent
white marks.
18. Power sources
Only connect the equipment to a power supply of
the type described in the operating instructions or
as marked on the equipment.
The primary method of isolating the equipment
from the mains supply is to remove the mains plug.
The equipment must be installed in a manner that
makes disconnection possible.
19. Abnormal smell
If an abnormal smell or smoke is detected from the
equipment, turn the power off immediately and
unplug the equipment from the wall outlet. Contact
your dealer and do not reconnect the equipment.
20. Damage requiring service
The equipment should be serviced by qualified
service personnel when:
A. The power-supply cord or the plug has been
damaged, or
B. Objects have fallen, or liquid has spilled into the
equipment, or
C. The equipment has been exposed to rain, or
D. The equipment does not appear to operate
normally or exhibits a marked change in
performance, or
E. The equipment has been dropped or the
enclosure damaged.
CAUTION: To reduce the risk of electric shock, do not
remove cover (or back). No user serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
The lightning flash with an arrowhead symbol
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
‘dangerous voltage’ within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
CAUTION: In Canada and the USA, to prevent electric shock,
match the wide blade of the plug to the wide slot in the
socket and insert the plug fully into the socket.
Class II product
This equipment is a Class II or double insulated electrical
appliance. It has been designed in such a way that it does
not require a safety connection to electrical earth (“ground”
in the U.S.)
Warning
Mains plug/appliance coupler is used to disconnect device
and it shall remain readily operable.
Safety Compliance
This equipment has been designed to meet the IEC/EN
60065 international electrical safety standard.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. Thisdevicemaynotcauseharmfulinterference,and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
The building installation shall be regarded as providing
protection in accordance with the rating of the wall socket
outlet.
Caution on installation
For proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
More than 0.3m (12in) is recommended.
Do not place any other equipment on this unit.
zz
z
Wall
z

EN
EN-3
FCC Information (for US
customers)
PRODUCT
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. Thisdevicemaynotcauseharmfulinterference,and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modification not expressly approved by JBL SYNTHESIS may
void your authority, granted by the FCC, to use the product.
NOTE
This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This product generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this product does cause harmful interference to radio or
television reception, which can be determined by turning
the product OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the product into an outlet on a circuit
different from that to which the receiver is connected.
Consult the local retailer authorized to distribute
this type of product or an experienced radio/TV
technician for help
Safety Information (for European
customers)
Avoid high temperatures. Allow for sufficient heat
dispersion when installed in a rack.
Handle the power cord carefully. Hold the plug when
unplugging the cord.
Keep the unit free from moisture, water, and dust.
Unplug the power cord when not using the unit for
long periods of time.
Do not obstruct the ventilation holes.
Do not let foreign objects into the unit.
Do not let insecticides, benzene, and thinner come in
contact with the unit.
Never disassemble or modify the unit in any way.
Ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths or curtains.
Naked flame sources such as lighted candles should
not be placed on the unit.
Observe and follow local regulations regarding
battery disposal.
Do not expose the unit to dripping or splashing
fluids.
Do not place objects filled with liquids, such as vases,
on the unit.
Do not handle the mains cord with wet hands.
When the switch is in the OFF position, the equipment
is not completely switched off from MAINS.
The equipment shall be installed near the power
supply so that the power supply is easily accessible.
A note about recycling
This product’s packaging materials are recyclable
and can be reused. Please dispose of any materials in
accordance with the local recycling regulations.
When discarding the unit, comply with local rules or
regulations.
Batteries should never be thrown away or incinerated
but disposed of in accordance with the local
regulations concerning battery disposal.
This product and the supplied accessories, excluding
the batteries, constitute the applicable product
according to the WEEE directive
Correct disposal of this product
These markings indicate that this product should not be
disposed with other household waste throughout the EU.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal and to conserve
material resources, this product should be recycled
responsibly.
To dispose of your product, please use your local return and
collection systems or contact the retailer where the product
was purchased.
Pb

EN-4
Welcome
Thank you and congratulations...
...for purchasing your JBL Synthesis Immersive Surround Sound Processor.
The JBL Synthesis SDR-35 Class G Immersive Surround Sound AV Receiver and SDP-55 Surround Sound Processor are
designed to ensure exceptional performance without compromise. With best- in- class audio and video signal integrity, 16
channels of native processing, Dolby ATMOS®, DTS:X®, Auro 3D®, IMAX® Enhanced, Dirac Live®, Logic16™, Network Streaming,
Dante® and Class G amplification; the JBL Synthesis® SDR-35 and SDP-55 deliver a powerful, sensory-rich experience with
unrivaled flexibility.
Immerse Yourself
Best in class audio and video signal integrity and processing, as well as uncompromising Class G amplification, ensure
exceptional transparency even with the most demanding program material. An audiophile-grade 24Bit / 192kHz ESS Sabre Pro
DAC, combined with Dirac Live room equalization and the exceptional dynamics and low distortion of Class G amplification
ensure pristine sound for music and movies. The Harman proprietary Logic 16 up mixer allows content to envelop the listener
with a rich and natural three dimensional sound, no matter the source format.
Your Content Your way
Many high-end AVR’s exclude real world everyday conveniences for the end-user. The SDR-35 provides a variety of ways to
experience content whether using an elaborate network media server over Ethernet or Wi-Fi or simply streaming directly
from your tablet or phone via Bluetooth with aptX™ HD. You can source content from a smart TV with high-resolution audio
via eARC, utilize Chromecast® built-in and Apple® AirPlay 2™. Use the MusicLife™ app to play your own music library from a
computer or NAS drive, or play directly from a USB flash drive. There’s even a DAB/FM antenna for OTA radio!
Superior Video
Advanced circuitry and decades of know-how ensure the 4K “Ultra HD” video signal is perfectly clear and rock solid. The
video stages are designed to harness the latest technology and deliver the best quality formats including Dolby Vision™, HLG,
HDR10, HDR10+, HDMI2.0b with HDCP2.2, and 3D video capabilities built-in.
IMAX Enhanced
JBL Synthesis® SDR-35 and SDP-55 are IMAX Enhanced-certified AV processors and feature DTS:X immersive audio decoding
that is optimized to properly reproduce the full dynamic range of IMAX theatrical sound mixes available in IMAX Enhanced
content. With meticulous adjustments modeled on the IMAX theatrical sound system, this proprietary IMAX audio mix is
translated for home theater environments and exclusively delivered using a special variant of the DTS:X CODEC technology to
deliver the IMAX signature sound experience in the home.
A More Dramatic TV Experience
Dolby Vision™ is superior HDR. Using the same underlying technology as the most advanced movie theatres, Dolby Vision
enables an enhanced image through superior content and smarter TV display performance.
Audiophile Quality
The SDR-35 and SDP-55 leverage the 24bit /192 kHz ESS® Sabre 9028 Pro featuring 114dB dynamic range and -100 THD+N in
and out, for A/D and D/A conversion. The analog circuitry on the input and output stages is optimized for unequaled dynamic
range, ultra-low distortion, and unmatched audio clarity. Carefully designed anti - jitter circuitry and ultra-clean power supplies
are incorporated to ensure all audio paths, including HDMI, are uncompromised.
Class G Amplification – The Best of Both Worlds
The SDR-35 AV Receiver features seven channels of Class G amplification. Class G offers greater efficiency and transparency,
with less wasted heat energy than class A. Like a hybrid car engine, Class G implements multiple power supplies. The first
power supply runs in pure Class A, which has no crossover distortion. If a dynamic signal is received that goes beyond the
capability of this first power supply, the secondary supply is gradually incorporated up to full rated power output as required.
This efficient design means additional power is only used when required. Modern high-speed silicon allows this switch to
take place well beyond the audio bandwidth. Multiple output devices within the amplifier ensure your listening experience is
powerful, dynamic and crystal clear.
Flexibility
With 15.1 decoding, 9.1.6 preamp outputs, plus seven channels of amplification, independent Zone 2 combined with
RS232, Ethernet and app control, the SDR-35 and SDP-55 offer exceptional versatility. Four of the sixteen channels allow
independent volume and delay settings for added configuration options. Independent volume control for the subwoofers
allow fine-tuning, and front panel headphone and aux (3.5mm) jacks add convenience.The JBL Synthesis Control app enables
complete control of the SDR-35 with an Android or iOS device. Flexible configuration, including Dante, IP, IR, and RS232
control and a Zone 2 with high-resolution audio, 4K video, IR, triggers, and power option, make the SDR-35 an outstanding
choice for a broad range of applications.
For the latest version of this guide, Firmware updates, and other support material, and links, please be sure to check
www.jblsynthesis.com.
JBL Synthesis Development Team