Jensen CMM720 Operating instructions

CMM720
7” CAPACITIVE TOUCH SCREEN
MULTIMEDIA MECHLESS RECEIVER
AM-FM, Bluetooth
USB Screen Mirroring
Front & Rear Camera Input
INSTALLATION &
OWNER’S MANUAL

CMM720
2
2
INFORMATION
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc.
microSD Logo is a registered trademark of SD-3C, LLC.
Siri and Apple are registered trademarks owned by Apple, Inc.
Google Assistant and Android are trademarks owned by Google LLC.
Other trademarks and trade names are those of their respective owners.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning: &KDQJHVRUPRGL¿FDWLRQVWRWKLVXQLWQRWH[SUHVVO\DSSURYHGE\WKHSDUW\
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
GHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRႇDQGRQWKHXVHULVHQFRXUDJHGWRWU\WR
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLႇHUHQWIURPWKDWWRZKLFKWKH
receiver is connected.
&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
Copyright and Trademark

3
3
CMM720 INFORMATION
Video / movie playback will not operate while the vehicle is moving.
This is a safety feature to prevent driver distraction. In-dash video / movie
functions will only operate when vehicle is in Park and the parking brake is
engaged. It is illegal in most jurisdictions for the driver to view video while
the vehicle is in motion.
The SAFETY NOTICE is reminder to drive responsibly and safely while using your
mobile phone device, or any APP’s that are compatible with this unit.
it is highly recommended that your JENSEN CMM720 is installed by a professional
installer or an authorized dealer.
This product is only for use in vehicles with 12VDC negative ground only.
To prevent damage or injury:
• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
'RQRWLQVWDOOWKHXQLWLQDVSRWH[SRVHGWRGLUHFWVXQOLJKWRUH[FHVVLYHKHDWRUWKH
possibility of water splashing.
'RQRWVXEMHFWWKHXQLWWRH[FHVVLYHVKRFN
• When replacing a fuse, only use a new one with the correct rating. Using a fuse with
the wrong rating may cause the unit to malfunction.
7RSUHYHQWVKRUWFLUFXLWVZKHQUHSODFLQJDIXVHGLVFRQQHFWWKHZLULQJKDUQHVV¿UVW
• Use only the provided hardware and wire harness.
,I\RXH[SHULHQFHSUREOHPVGXULQJLQVWDOODWLRQFRQVXOW\RXUQHDUHVW-(16(1GHDOHU
• If the unit malfunctions, reset the unit as described. If the problem still persists,
consult your nearest JENSEN dealer or call tech assistance @ 1-888-921-4088.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use
DVWLႇFORWKRUVROYHQWVVXFKDVSDLQWWKLQQHUDQGDOFRKRO7KH\FDQVFUDWFKWKH
VXUIDFHRIWKHSDQHODQGRUUHPRYHWKHSULQWLQJ
• When the temperature of the unit falls (as in winter), the liquid crystal inside the
screen will become darker than usual. Normal brightness will return after the unit is
in use for a while.
:KHQH[WHQGLQJWKHLJQLWLRQEDWWHU\RUJURXQGZLULQJPDNHVXUHWRXVH
automotive-grade wiring with an a minimum AWG 16 or more to prevent voltage
drops.
'RQRWWRXFKWKHOLTXLGFU\VWDOÀXLGLIWKH/&'LVGDPDJHGRUEURNHQ7KHOLTXLG
FU\VWDOÀXLGPD\EHKD]DUGRXVWR\RXUKHDOWKRUIDWDO,IWKHOLTXLGFU\VWDOÀXLGIURP
WKH/&'FRQWDFWV\RXUERG\RUFORWKLQJZDVKLWRႇZLWKVRDSLPPHGLDWHO\
Safety Notice

INSTALLATIONCMM720
4
4
Please read and understand entire manual before
installation.
&RQVXOWDTXDOL¿HGWHFKQLFLDQIRUGHWDLOHGLQVWUXFWLRQVRU
installation assistance.
Before You Start
• Disconnect negative battery terminal.
• Avoid installing the unit where it would be subject to high
temperatures, such as from direct sunlight, or where it would be
 VXEMHFWWRGXVWGLUWRUH[FHVVLYHYLEUDWLRQ
Getting Started
• Unpack unit from its protective packaging.
• Connect vehicle wiring harness and antenna to this receivers
KDUQHVV6HHZLULQJLQVWUXFWLRQV&RQVXOWDTXDOL¿HGWHFKQLFLDQLI
you are unsure.
&HUWDLQYHKLFOHVPD\UHTXLUHDQLQVWDOODWLRQGDVKNLWDQGRUZLULQJ
harness adapter (sold separately).
• Reconnect battery negative terminal.
• Test for correct operation and secure back into dashboard.
• Snap trim ring into place if needed.
Preparation
Typical ISO-DIN Installation
Unit
Trim Ring

5
5
CMM720 INSTALLATION
Tips
When replacing a fuse, make sure to use the correct type and
amperage. Using an incorrect fuse could cause damage. The unit
uses (1) 10 amp ATC blade-type fuse located on the back of the unit.
Front / Rear camera inputs
Up to two cameras (not included) can be used. We recommend
JENSEN Part # BUCAM200J for front camera and BUCAM300AJ or
BUCAM400AJ for rear camera.
Input / Output Wiring Diagram
SWC INPUTGRAY/RED

OPERATIONCMM720
6
6
Main Control Locations
1Microphone
20RGH9RLFH$VVLVWDQW
37XQH7UDFN8S
49ROXPH3RZHU0XWH
57XQH7UDFN'RZQ
6microSD Card Slot
7Reset
8$X[LOLDU\,QSXW
9USB Slot

7
7
OPERATIONCMM720
Source Menu Operation
Press to access Radio.
Press to initiate USB mirroring.
Press to access Bluetooth phone.
Press to display and adjust system settings.
Press to display the rear and front cameras.
Press to access AV input.
3UHVVWRDFFHVVDX[LOLDU\LQSXW
Press to access the Bluetooth music.
3UHVVWRDFFHVV¿OHVRQPLFUR6'FDUG
3UHVVWRDFFHVV¿OHVRQ86%GHYLFH
Radio 1
USB Mirroring 2
Bluetooth Phone 3
Settings 4
Camera 5
AV Input 6
$X[LOLDU\,QSXW 7
BT Music 8
microSD 9
USB 10
3
12
10
4
6
98 7 5

OPERATIONCMM720
8
8
On Screen Controls
15
23 4
Press up to two times to dim the screen. Press
a third time to put the unit in standby mode
(screen will go black). Press anywhere on the
screen to return to normal screen operation.
Press to activate the voice assistant feature.
Press to access and adjust audio settings.
Press to directly access your phone’s
navigation app (refer to Navigation Hot Button
section of the manual for setup instructions).
Press to display and adjust system settings.
Screen Brightness 1
Voice Assistant 2
Audio 3
Navigation Hot Button 4
Settings 5

9
9
OPERATIONCMM720
Select any of the preset EQ settings (Flat, Classic, Rock, Pop, Jazz, Beat or
User) or use the touch screen to manually adjust EQ settings.
Select any of the preset Surround settings: Concert, Church, Passive,
Wide, Live or None.
Adjust balance (8L to 8R) and fader (8F to 8R), or use the touch screen to
manually adjust balance and fader settings.
Audio Settings

OPERATIONCMM720
10
10
Settings Menu
From the Main Menu, press the gear icon to access the Setup menu and
adjust the following: General, Audio, Display and Bluetooth.
General:
• OSD Language - Select English.
• Wallpaper - Select from three different wallpaper options.
• Radio Area - Select Europe, USA, South America or Asia.
• Time Setting - Set the date (month, day, year) and time (hours,
PLQXWHV$030DQGKRXURUKRXUFORFN.
• Beep - Enable or disable the audible beep.
• Camera - Enable or disable the rear camera input.
• Version - Press to display version numbers.
• Restore Default - Press to restore unit to default factory settings.
Audio:
• Audio Settings - Press to access and adjust audio settings.
• Subwoofer- Press to adjust subwoofer frequency and volume.
• Loudness - Enable or disable the loudness feature.
Display:
• Aspect Ratio - Select desired region (America, Europe or Latin).
• Adjust - Press to adjust screen brightness, contrast, hue, saturation
and shaprness.
• Panel - Select from the following Backlight settings: Off, 10 seconds,
20 seconds or 30 seconds.
Bluetooth:
• Bluetooth - Turn Bluetooth signal on or off.
• Auto Answer - Turn auto answer feature on or off.

11
11
OPERATIONCMM720
Tuner Operation
Radio Operation
Main Menu 1
Mode Indicator 2
Tune Down 3
Preset Stations 4
Band 5
Local | Distance 6
Stereo | Mono 7
AS | PS 8
Tune Up 9
Select the Radio icon from the Main Menu
screen.
Press to return to Main Menu screen.
Displays the current mode of operation.
Press to tune to a lower frequency one step at
a time. Press and hold to automatically tune to
the last strong station.
Press any preset station stored in the current
band to tune radio to saved frequency. To save
presets, tune the radio to desired station, then
press and hold the desired preset button to
save the station.
Press to select between 2 AM and 3 FM bands.
Press to toggle between local and distance
tuning.
Press to toggle between Stereo and Mono
tuning.
3UHVVWRVFDQSUHVHWVDQGOLVWHQWRWKH¿UVW
seconds of each. Press again to stop scanning
and listen to the station. Press and hold to
DXWRPDWLFDOO\¿QGDQGVWRUHWKHVWURQJHVW
stations as presets,
Press to tune to a higher frequency one step at
a time. Press and hold to automatically tune to
the last strong station.
12
567 8
3
4
9

OPERATIONCMM720
12
12
USB/microSD Operation
12
456 7
3
86%PLFUR6'2SHUDWLRQ
Main Menu 1
Mode Indicator 2
File Information 3
Previous Track 4
3OD\3DXVH 5
1H[W7UDFN 6
Folder Search 7
Random 8
Repeat 9
7RSOD\03¿OHVIURPD86%GHYLFHRUPLFUR6'FDUG
insert a USB device or microSD card, and playback
will begin automatically. To return to USB or microSD
playback from another mode of operation, select the
corresponding icon from the Main Menu.
Press to return to Main Menu screen.
Displays the current mode of operation.
'LVSOD\VLQIRUPDWLRQDERXWWKHFXUUHQW¿OH
Press to go back to the previous track. Press and hold
to fast reverse the current track, then press PLAY /
PAUSE to resume playback.
Press to pause the current track, then press again to
resume playback.
3UHVVWRDGYDQFHWRWKHQH[WWUDFN3UHVVDQGKROG
to fast forward the current track, then press PLAY /
PAUSE to resume playback.
3UHVVWRDFFHVVWKHGLUHFWRU\RIIROGHUVDQG¿OHV
8VHWKHXSGRZQDUURZVWRVFUROOWKURXJKWKHIROGHU
list, then press on the name of the desired folder to
DFFHVVLW8VHWKHXSGRZQDUURZVWRVFUROOWKURXJK
WKH¿OHOLVWWKHQSUHVVRQWKHQDPHRIWKHGHVLUHG¿OH
to access it.
3UHVVWRWXUQ5DQGRPIHDWXUHRQRURႇ
6HOHFWD5HSHDWRSWLRQ$OO2QH)ROGHURU2ႇ
8
9

13
13
OPERATIONCMM720
Media Compatibility
The following types of files are not compatible:
• MP3 PRO format, MP3 playlists
• RMP format
• WAV format
• WMV format
• AAC, protected AAC, M4A format
MP3 playback sequence begins in the root folder. Any folders
WKDWGRQRWLQFOXGH03-3*ILOHVDUHVNLSSHG
ISO9660 standards:
0D[LPXPQHVWHGIROGHUGHSWKLVLQFOXGLQJWKHURRWIROGHU
9DOLGFKDUDFWHUVIRUIROGHUILOHQDPHVDUHOHWWHUV$=DOOFDSV
numbers 0-9, and “_” (underscore). Some characters may not
be displayed correctly, depending on the character type.
Some files may not play, depending on sampling rates and bit
rates. For best results, use the following settings when ripping
MP3 files: 128kbps or higher constant bit rate; 44.1kHz or higher
sampling frequency.
Media
Compatibility
Playback Order
Compatible
Recording
Formats
Notes
File Type MP3
File System FAT FAT 12 X
)$7)$7
9
File
([WHQVLRQ
PS030SP3
9
UPSPD X
MPEG
Format
MPEG 1
9
MPEG 2
9
MPEG 2.5
9
Sampling
Frequency
MPEG 1 N+]
MPEG 2 N+]
MPEG 2.5 N+]
Bitrate
MPEG 1 32 ~ 320kbps
MPEG 2 8 ~ 160kbps
MPEG 2.5 8 ~ 160kbps
Other
Information
Directory Depth Unlimited
File Name Length 32 bytes
Total File Number 2000 files
Total Folder Number 200 folders
File Number via Folder 2000 files
MP3 ID3 TAG
YHU[
9
YHU[
9
Title, Artist, Album
9
Notes:
• It is not possible to view JPG files on the in-dash monitor while the vehicle is
moving. This is a safety feature to prevent driver distraction.
• The JPG image viewer function will only operate when vehicle is in park and the
parking brake is engaged.

OPERATIONCMM720
14
14
Preparation
Pairing a New
Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu 1
Mode Indicator 2
Keypad 3
Backspace 4
Keypad Display 5
Music Display 6
Contact Display 7
Before using a Bluetooth device, it must be paired
and connected. Make sure that Bluetooth is activated
on your device before you begin the pairing process.
The unit broadcasts the pairing signal constantly
when no devices are currently connected. Complete
the pairing sequence from your Bluetooth device.
Refer to the owner’s manual for your device for more
details. The device name is “JENSEN CMM720”. The
unit can be in any mode of operation when pairing is
performed. On certain phones, pairing may need to
be done more than once.
Most Bluetooth devices support the auto-connect
feature and will connect automatically if the device is
in range when the unit is powered-on. If your device
was previously paired but does not connect, enter
the Bluetooth setup menu and turn Auto Connect on.
To access the phone, select Bluetooth Phone from
the Main Menu or from any operational mode.
Press to return to Main Menu screen.
Displays the current mode of operation.
Use the keypad to dial a phone number.
Press to backspace when using the keypad.
Press to display the keypad.
Press to display Bluetooth music.
Press to display Contact list, then press desired
contact to initiate a call.
1 2
Bluetooth Operation
6
7
5
3 4

15
15
OPERATIONCMM720
Bluetooth Operation
Paired Device List 8
Talk 9
End Call 10
Previous Track 11
3OD\3DXVH 12
1H[W7UDFN 13
Press to display a list of paired devices, and
select desired device to connect.
Press to connect a call to the number entered.
Press to end a call.
Press to go back to the previous track.
Press to pause the current track, then press again
to resume playback.
3UHVVWRDGYDQFHWRWKHQH[WWUDFN
11 12 13
9
10
8

OPERATIONCMM720
16
16
USB Mirroring
To set up USB Mirroring capabilities, select
USB Mirroring from the main menu and follow
the on-screen directions for connecting your
Android or iPhone. Once completed, the unit
will mirror phone display onto the unit’s
on-screen display. To return to the main menu,
press the lower left corner of the screen to
display and select the home button.
Note: Apple and Android operating system updates may cause your
UHFHLYHUWRPDOIXQFWLRQ7KLVFDQXVXDOO\EHVROYHGE\GRLQJDVRIWZDUH
¿UPZDUHXSGDWHRQWKHUHFHLYHU7RVHHLI\RXUUHFHLYHUKDVWKHODWHVW
¿UPZDUHFRQWDFWFXVWRPHUVHUYLFHDW
App Operation
The Jensen Smart app is the ultimate
wireless remote control for your
receiver. You can download the
Jensen Smart app from the Apple App
Store or Google Play Store and install
it on your smartphone or tablet. Scan
the following QR code to download
the Jensen J-Link P1 application on
your smartphone.
Voice Assistant
Your receiver is designed with an easy access voice activation button to
use Siri® or the Google Assistant™ via your car’s Bluetooth. Interact with
your smartphone assistant while you drive with only the push of a button!
Bluetooth should be paired between your smartphone and the receiver.
Press the voice activation button, and the receiver will switch into
Bluetooth mode, This will activate Siri® or Google Assistant™ on your
smartphone. You will need to manually switch back to the previous or
desired mode once this operation is terminated.
Navigation Hot Button
Once the Jensen Smart app is installed, press the Navi hot button to
connect your receiver to your phone through the on-screen UI. Instantly
stream audio from your favorite navigation apps on a connected
smartphone through your car’s receiver vla Bluetooth.
Note: A smartphone with data is required to stream navigation.

17
17
OPERATIONCMM720
Rear Camera
Connect an optional rear camera to the Rear Camera inputs (Yellow RCA
connector for video and Black RCA connector for audio). Refer to the
wiring diagram for details.
Manual selection - Touch the REAR CAMERA icon from the Main Menu or
from any operational mode (when enabled) to select camera mode. Touch
WKHWRSOHIWDUHDRQWKHVFUHHQWRH[LWFDPHUDPRGH
Note: The manual mode is for dedicated cameras that are ALWAYS on while
driving, it is not meant for cameras that are connected to the vehicle’s
reverse light. The unit will automatically select camera mode when
connected to the reverse lamp circuitry.
1RWH([WHUQDOYLGHRRXWSXWLVQRWDFWLYHZKHQXVLQJWKHUHDUFDPHUDLQSXW
&RQQHFWDQRSWLRQDODXGLRVRXUFHLQWRWKHDX[LOLDU\LQSXWRQWKHULJKWVLGH
of the front panel.
6HOHFWWKHDX[LOLDU\LQSXWLFRQIURPWKH0DLQ0HQXWROLVWHQWRDXGLR
$GMXVWYROXPHRQWKHH[WHUQDODXGLRVRXUFHDVQHHGHGLIFRQQHFWHGWRWKH
headphone output of the device).
Auxiliary Input
&RQQHFWDQRSWLRQDODXGLRVRXUFHLQWRWKHUHDU$9LQSXW
6HOHFW$9,QSXWIURPWKH0DLQ0HQXWROLVWHQWRDXGLR
$GMXVWYROXPHRQWKHH[WHUQDODXGLRVRXUFHDVQHHGHGLIFRQQHFWHGWRWKH
headphone output of the device).
A/V Input
Front Camera
Connect an optional front camera
to the Front Camera inputs (Yellow
RCA connector for video; there
is no audio connection for a front
camera. Refer to the wiring diagram
for details.
To access the front camera, touch the
CAMERA icon in the Main Menu. The
unit displays rear camera by default.
Press the Front Camera icon in the top right corner to switch to front
camera view.

OPERATIONCMM720
18
18
Steering Wheel Controls
We recommend the PAC SWI-RC .
6HW5DGLR6HOHFW6ZLWFK6HWWKH6:,5&WRSRVLWLRQ3LRQHHU2WKHU6RQ\
7RSURJUDPXVHWKH3LRQHHU6RQ\2WKHUUDGLRIXQFWLRQPDSSLQJRUGHU
3. When programming the SWI-RC, if a function is not supported (or not desired),
then the function MUST be skipped as per the PAC SWI-RC instructions.
4. The SWC function MUST be programmed in the correct order per the PAC SWI-RC
radio function mapping order instructions.
A third-party adapter must be used in order for the CMM7720 to be compatible with
any OEM steering wheel controls.
The CMM7720 has a built-in 3.5mm SWC interface that compatible with many popular
3rd party SWC control modules, such as PAC, METRA, and others.
The following controls are available for most vehicles.
Volume +
Volume -
Mute
6HHN7UDFN
6HHN7UDFN
Band
Mode
BT Talk
BT End Call
Note: Not all OE steering wheel functions may be supported by the CMM7720
POWER M
Replace with
ATO Type fuse
Only
3.5mm SWC port located on the rear of the unit, on the
0$,132:(5,2+DUQHVV

19
19
OPERATIONCMM720
Limited One Year Warranty
7KLVZDUUDQW\JLYHV\RXVSHFL¿FOHJDOULJKWV<RXPD\DOVRKDYHRWKHUULJKWVZKLFK
vary from state to state.
Namsung America Inc. warrants this product to the original purchaser to be free
from defects in material and workmanship for a period of one year from the date of
the original purchase.
Namsung America Inc. agrees, at our option, during the warranty period, to repair
any defect in material or workmanship or to furnish an equal new, renewed or
FRPSDUDEOHSURGXFWZKLFKHYHULVGHHPHGQHFHVVDU\LQH[FKDQJHZLWKRXWFKDUJHV
VXEMHFWWRYHUL¿FDWLRQRIWKHGHIHFWRUPDOIXQFWLRQDQGSURRIRIWKHGDWHRISXUFKDVH
Subsequent replacement products are warranted for the balance of the original
warranty period.
Who is covered?
7KLVZDUUDQW\LVH[WHQGHGWRWKHRULJLQDOUHWDLOSXUFKDVHUIRUSURGXFWVSXUFKDVHG
from an authorized Dual dealer and used in the U.S.A.
What is covered?
This warranty covers all defects in material and workmanship in this product. The
IROORZLQJDUHQRWFRYHUHGVRIWZDUHLQVWDOODWLRQUHPRYDOFRVWVGDPDJHUHVXOWLQJ
IURPDFFLGHQWPLVXVHDEXVHQHJOHFWSURGXFWPRGL¿FDWLRQLPSURSHULQVWDOODWLRQ
incorrect line voltage, unauthorized repair or failure to follow instructions supplied
with the product, or damage occurring during return shipment of the product.
6SHFL¿FOLFHQVHFRQGLWLRQVDQGFRS\ULJKWQRWLFHVIRUWKHVRIWZDUHFDQEHIRXQGYLD
www.jensenmobile.com
What to do?
1. Before you call for service, check the troubleshooting guide in your owner’s
manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period, you must carefully pack the
product (preferably in the original package) and ship it by prepaid transportation
with a copy of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name, a return UPS
VKLSSLQJDGGUHVV32%R[QRWDFFHSWDEOHDQGDGD\WLPHSKRQHQXPEHUZLWK\RXU
shipment.
4. For more information and for the location of the nearest authorized service center
please contact us by one of the following methods:
• Call us toll-free at 1-888-921-4088
• E-mail us at [e-mail]
([FOXVLRQRI&HUWDLQ'DPDJHV7KLVZDUUDQW\LVH[FOXVLYHDQGLQOLHXRIDQ\
DQGDOORWKHUZDUUDQWLHVH[SUHVVHGRULPSOLHGLQFOXGLQJZLWKRXWOLPLWDWLRQWKH
LPSOLHGZDUUDQWLHVRIPHUFKDQWDELOLW\DQG¿WQHVVIRUDSDUWLFXODUSXUSRVHDQGDQ\
obligation, liability, right, claim or remedy in contract or tort, whether or not arising
from the company’s negligence, actual or imputed. No person or representative is
authorized to assume for the company any other liability in connection with the sale
of this product. In no event shall the company be liable for indirect, incidental or
consequential damages.

CMM720
20
20
OPTIONS
General
PROBLEM CAUSE ACTION
Unit will not
turn on
(no power)
5HGDQGRU<HOORZZLUHQRWFRQQHFWHGRU
incorrect voltage
Check connections for proper voltage
(11~16VDC)
Black wire not connected Check ground connection
Blown fuse on unit or vehicle Replace fuse(s)
Unit has power
(but no sound)
Speaker wires not connected Check all connections, including speakers
Speakers are blown Replace speakers
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from each
other and chassis ground
Unit blows
fuse(s)
Yellow or red wire touching chassis ground Check for pinched or shorted wires
Speaker wires touching chassis ground Check for pinched or shorted wires
Incorrect fuse rating Use fuse with correct rating
Unit has audio
(but no video)
Parking brake safety circuit not connected
Parking brake not applied
Check connections at parking brake
Apply parking brake as described in
manual
Video Playback Codec is not supported See Media Codec Support section
Please keep your original sales receipt and be
prepared to provide this receipt in the event
you require service, as your original receipt
is considered the best proof of purchase and
indicates the date you purchased your JENSEN
product.
Dealer Name:
Dealer Phone:
Purchase Date:
For Your Records
Dealer Info
Troubleshooting
Customer Support
1-888-921-4088
(Monday-Friday, 9AM-5PM EST)
9LVLWKWWSVZZZMHQVHQPRELOHFRP