Jensen JiMS 220 - Docking Digital Music System User manual

OWNER'S MANUAL
JiMS-220
®
(iPod Not Included)
PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING
THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE
DOCKING DIGITAL MUSIC SYSTEM WITH
®
CD FOR iPod
JIMS-220 AUSIB_04
148.5 x 210mm (fold size)
use 5pcs 297 X 210mm 20pages
80gms paper bk+bk
2008.07.29 VER 4.0

TABLE OF CONTENTS
3
4-5
6
7
8-9
10
11
12
13
13
14
14
15
16
16
17
18
18
DEAR JENSEN CUSTOMER
IMPORTANTSAFETY INSTRUCTIONS
PRODUCT FEATURES
INSTALLATION
LOCATION OF CONTROLS
RADIO OPERATIONS
CD OPERATIONS
iPod OPERATIONS
EQ SETTING
AUXILIARY INPUT
CLOCK ANDCALENDAR SETTINGS
ALARM OPERATIONS
SLEEP TIMER
CARE ANDMAINTENANCE
TROUBLESHOOTING GUIDE
SPECIFICATIONS
SERVICE
DISPLAY MESSAGE AT CD MODE
iPod , iPodmini, iPod nano,iPod shuffle, iPod touch andiPod classic aretrademarks ofApple Inc.,

4
Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical
enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So what
sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.After all, we want
you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage
from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries
Association's Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise.
Customer's Record:
The serial number of this product is found on its bottom cover. You should note the serial number of this unit
in the space provided as a permanent record of your purchase to aid in identification in the event of theft of
loss.
Model Number: JiMS-220 Serial Number:
DEAR JENSEN CUSTOMER
3
IMPORTANT SAFETY INSTRUCTIONS

6
ON PROTECTION AGAINST LASER ENERGYEXPOSURE
As the laser beam used in this compact disc player is harmfulto the eyes,do not attemptto
disassemble the casing.
Stop operation immediately if any liquid or solid object should fall intothe cabinet.
Do not touch the lens or poke at it. If you do,you may damagethe lens andthe player maynot
operate properly.
Do not put anything in the safety slot. If you do, thelaser diode willbe ON whenthe CD dooris
still open.
This unit employs a laser. The use of controls or adjustment or performance of procedures other
than those specified here may result in exposure to hazardous radiation.
5
IMPORTANT SAFETY INSTRUCTIONS
JiMS-220 is aniPod Docking Music Systemwhich incorporates thefollowing features :
iPod iPod mini,iPod classic, iPod touch and iPod 1st to 3rdGen nano Player/Re-charger
A CDplayer playback CD/CD-R/CD-RW disc withAudio CDformat
CD Playback modes:
- Repeat one/ RepeatAll
- Program playbackup to 20tracks
AM/FM PLL digital tuner with10AM + 10FMpresets
AUX(Auxiliary) audio input
Stereo phones jack
Digital volume control
EQ control (Rock,Classic, Pop, Jazz)
LCD backlight
Clock with monthand date
Sleep timer function
Alarm clock withsnooze function
Programmable alarm wakesyou to iPod,CD, radio stationor buzzer
PRODUCT FEATURES

8
LOCATION OF CONTROLS
Main Unit
Top view Front view
21
23 22 23
20
2
1
11
13
12 10 13
4 3
16 15
14 18
17 19
5
8 9
7
6
6
1. POWER button ---- Turn the unit on and off.
2. FUNCTION button ---- Select AM/FM radio, iPod, CD and AUX (auxiliary input) mode.
3. iPod dock
4. iPod docking connector
5. PUSH OPEN CD Cover Location ---- Press here to Open/Close the CD cover.
6. VOLUME + / - button ---- Adjust volume level up and down.
7. TUNE + button ---- A. Radio mode: Tune the radio frequency up.
B. CD, iPod mode: Press the button and skip to next track (song).
Press and hold the button for fast forward.
8. TUNE - button ---- A. Radio mode: Tune the radio frequency down.
B. CD, iPod mode: Press the button and skip to previous track (song).
Press and hold the button for fast backward.
9. MODE button ---- Enter the setting mode.
10. PLAY/PAUSE button ---- Play or pause playback of CD or iPod.
11. STOP button ---- Stop CD playback.
12. P-MODE button ---- Select CD play mode.
13. CH +/- button ---- Select preset radio station.
14. BAND button ---- Selects AM / FM radio band
15 PGM button ---- Set CD program.
16. MEM button ---- Save radio preset station.
17. SLEEP button ---- Select sleep timer duration.
18. ALARM ON/OFF button ---- Turn the alarm on and off.
19. SNOOZE/LIGHT button ---- Activate the snooze function;
turn LCD backlight ON/OFF.
20. EQ button ---- Select equalizer (EQ) effect.
21. LCD display
22. iPod docking drawer ---- Push to Open/Close the drawer.
23. Pair of Speakers
7
INSTALLATION
For Clock and Radio preset station backup
1. A clock battery compartment is located at the bottom of the unit.
2. Install 2 x AAA batteries (not included) into the Clock battery compartment.
WARNING:
- Be sure that the batteries are installed correctly. Wrong polarity may damage
the unit and void the warranty.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
- Only batteries of the same or equivalent type as recommend are to be used.
- If the unit is not to be used for an extended period of time, remove the battery.
- Do not dispose of batteries in fire, batteries may explode or leak.
Remote Control
The remote control operates on one CR2032 battery (included). To activate the remote control, remove
the insulation tab attached in the battery compartment.
AC-DC Adaptor Connection
An AC-DC Adaptor with the output DC10V 1000mA(included) is required for operating the main unit.
To connect theAC-DC Adaptor to the unit and AC outlet:
1.Firmly and securely insert the DC plug of the adaptor (included) to the DC Jack on the unit
2.Plug the Adaptor's AC plugs into an outlet rated at 240V~ 50Hz
NOTE: This unit is not magnetically shielded and may cause color distortion on the screen of some TVs or
video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if
unnatural color shifts or image distortion occurs.
Install 2 piecesAAA
battery into the battery
compartment.

10
RADIO OPERATIONS
Radio Tuning
1. Press POWER button to turn on the unit.
2. Press the FUNCTION button to select radio mode.
Press BAND button to select AM / FM radio band, if necessary.
3.To manually tune to desired station, repeatedly press the / TUNE- or / TUNE + button.
4.To automatically search for stations with strong signals, press and hold the / TUNE- or / TUNE +
button until the frequency digits on display begins to scan then release the button. The tuner will stop on
the first strong station signal it finds.
Notes:
• Manual tune to select weaker stations that might be by passed during automatic tuning.
• If the automatic tuning does not stop on the exact frequency of the station,
for example, it stops on 100.9 MHz instead of 100.8 MHz, use the manual tuning method to "fine tune"
to the exact frequency of the desired station.
• In FM mode, you may press the MODE button to select FM stereo or mono receiving mode, if necessary.
Radio Preset Stations
The unit allows you to store up to 10 AM and 10 FM stations for easy recall at any time.
Manual Preset
1. Press POWER button to turn on the unit.
2. Press the FUNCTION button to select radio mode.
Press BAND button to select AM / FM radio band, if necessary.
3. Tune to the radio station you want to store in memory using the / TUNE- or / TUNE + button.
4. Press the MEM button. The preset channel number "01" appears on display.
5. To select desired preset station number, press CH + / - button.
6. To confirm preset location, press the MEM button.
7. To store up to 10AM and 10 FM station presets, repeat steps 3 to 6 above.
FMAntenna
Unwrap and fully extend the FM Antenna wire for best FM radio reception.
Tips for the Best Reception
To obtain the bestAM reception, slightly rotate the unit until the clearest signal is recrived or place it near
outdoor.
To obtain the best FM reception, fully extend the FM Antenna and adjust its direction.
NOTE: The iPodmay cause interferenceto theAM reception ifit is dockedand turned ON.
You shouldturn off the iPod manuallyor remove itfrom the unitfor better reception.
9
1. Infra-red Transmitter
2. POWER On/Off button
3. SLEEP button - Select sleep timer duration
4. FUNCTION button - Select AM/FM radio, iPod, CD and AUX mode
5. P-MODE button - Select CD play mode
6. MODE button - Enter the setting mode
7. BAND button - Selects AM / FM radio band
8. STOP button - Stop CD playback
9. PLAY/PAUSE button - Play or pause playback of CD or iPod
10. CH+/- button - Select preset radio station
11. TUNE + /FF and TUNE - /FR button
Tune the radio channel frequency up or down;
Skip forward or skip backward in iPod, CD mode
12. VOLUME + / - button - Adjust volume level up and down
13. MEM button -Save radio preset station
14. PGM button - Set CD program
15. MUTE button - Mute volume
16. SNOOZE/LIGHT button - Activate the snooze functio, turn LCD
backlight ON / OFF
17. EQ button - Select equalizer (EQ) effect
18. ALARM ON/OFF button - Turn the alarm on and off
19. Battery Compartment
Remote Control
LOCATION OF CONTROLS
24. Headphone Jack
25. BACKLIGHT Dimmer ---- Select LCD back-lit Dim/Bright.
26. FM Antenna wire
27. AUX IN ---- An audio signal input cable with a 3.5mm
stereo plug for the connection of external audio device.
28. RESET ---- For resetting the unit.
29. Battery Compartment ---- Located at bottom of the unit.
30. DC IN Jack ---- To connect to external DC power supply
Rear view
29 27 28
26 25 24 30
POWER
FUNC MODE
MUTE
P-MODE
SLEEP
BAND
CH
EQ
ON/OFF
LIGHT
VOLUME
SNOOZE ALARM
ON/OFF
PGM MEM
TUN+
FF
CH+
FR
TUN
1
3
4
2
5
7
6
9
8
10 12
11
13 15
14
16
17
18
19

5. To return to normal playback, press STOP button to stop the programmed playback.
12
DISPLAY MESSAGE AT CD MODE
Multi-Function Display Meaning
CD door opened
Reading inserted CD
No Disc
Inserted Disc cannotbe recognized
2. To select a track number for the programming track, press or button.
3. When desired track number displayed, press the PGM button to confirm entry.
The program number advances by one .
Then both "track number" and "PGM" indicators flash on display.
4. To program up to 20 tracks, repeat steps 2 and 3 until all desired tracks are entered.
Or, to begin programmed playback, press PLAY/PAUSE button; "PGM" indicator stays on.
Notes:
• If you press the or button during programmed playback, the unit will skip backward/forward to the
next track in the program, but not the next track in sequence of the disc which is being played.
• The CD play modes function, “ ” repeat one track and “ ” repeat all programmed tracks, work
in the same manner as during normal CD playback (see CD Play Modes above).
Track Number
6. To playback the programmed tracks again, press the PGM button once and then press the
PLAY/PAUSE button to start.
7. To clear the programmed tracks, press the POWER button to turn off the unit and turn on again.
NOTE: If the disc is dirty, damaged or unreadable, the "no" or "Er" will appear in the display.
If this occurs, clean the disc, insert the disc correctly or try another disc.
Notes on CD-R/RW Disc
1. Because of non-standardized format definitions / production of CD-R/RW, playback quality
and performance are not guaranteed.
2. Manufacturer is not responsible for playability of CD-R/RW due to recording conditions
such as PC performance, writing software, media ability, etc.
3. Do not attach a label or seal to either side of CD-R/RW. It may cause a malfunction.
11
The CD player can playback CD/CD-R/CD-RW discs with Audio CD format.
CD Playback
1. Press the POWER button to turn the unit on.
2. Press the FUNCTION button to select CD mode.
3. Press the PUSH OPEN location of CD cover to open the cover.
4. Press a CD onto spindle with printed side facing up.
5. Slightly press the PUSH OPEN location to close and lock the CD cover.
6. The player starts music playback automatically. The current playback tack number shows on display.
7. Adjust the sound level by pressing VOLUME + / - buttons.
8. To skip to a desired CD track, press the or button.
9. To fast-rewind or forward within the track playing, press and hold the or button.
10. To pause CD playback, press the PLAY/PAUSE button. To resume playback, press the
PLAY/PAUSE button again.
11. Tostop CD playback, press the STOP button.
CD OPERATIONS
CD Program Playback
This feature allows you to program up to 20 tracks to play in a desired order.
1. With CD playback stopped, press PGM button once. The "program number" shows on display :
then both "track number" and "PGM" indicators flash on display :
CD Play Modes
• Repeat Playback
1. To repeat playback of one track, press the P-MODE button once. A repeat one icon “ ”
appears on the LCD.
2. To repeat playback of an entire CD, press P-MODE button twice. A repeat all icon “ ”
appears on the LCD.
To cancel a CD play mode. Press the P-MODE button repeatly until repeat icon disappeared
or press the STOP at any time.
Program Number
Track Number

14
When the unit is at the power off mode.
Set Clock
1. Press the MODE button 3 times, the clock display flashes.
2. To set the hour, press the / button to set advance or reverse hour setting.
Press and hold the button for fast advance / reverse value.
3. To set the minute, press the VOLUME + / - button to set advance or reverse minute setting.
Press and hold the button for fast advance / reverse value.
Set 12/24 Hour format
4. Press the MODE button again to enter 12/24 hour format setting mode.
5. To select 12/24 hour format, press either the / button.
Set Year
6. Press the MODE button again to enter the year setting mode, the year reading flashes.
7. To set year, press the /button to set advance or reverse the year.
Press and hold the button for fast advance / reverse value.
Set Month/Date
8. Press the MODE button again to enter the month/date setting mode, the month/date reading flashes.
9. To set Month, press the / button to set advance or reverse the month.
Press and hold the button for fast advance / reverse value.
10. To set Date, press the VOLUME + / - button to set advance or reverse date.
Press and hold the button for fast advance / reverse value.
Exit setting mode
11. To save all settings and exit the setting mode, press the MEM button.
CLOCK AND CALENDAR SETTINGS
This unit provides an auxiliary audio signal input for connecting external audio devices.
Use the included audio cable with 3.5 mm stereo plug to connect the external device to the AUX IN Jack
located on the back of the unit.
AUXILIARY INPUT
1. Pull out the audio AUX LINE-IN cable located on the back of the unit and extend it to a desired length.
2. Connect the 3.5mm AUX IN stereo plug to the line out jack or Headphone jack of your external
audio device
3. Press the POWER button to turn on the unit.
4. To select auxiliary audio input, press the FUNCTION button. “AUX” indicator show on display.
5. Turn on the auxiliary device.
6. The volume and equalizer can now be controlled through the main
unit. Operate all other functions on the auxiliary device as usual.
To external auxiliary device
Note:
(1) If you connected the Line Out Jack of your external device then you
only need to adjust the volume control of this unit. If you connected
the Headphone Jack of your external device then you may need to
adjust both the volume control of your external device and the volume
control of this unit to find the most desirable volume setting.
(2) Press the POWER ON / OFF button turning off the unit when you
finish listening.
Don't forget to switch off the power of your external device as well.
13
The unit has4 preset EQsettings for yourselection.
In either RADIO,iPod, CD orAUX modes:
Toselect preset EQ:ROCK, CLASSIC, POPor JAZZ ; press EQ button.
The corresponding indicatorshows on .display
EQ SETTING
iPod OPERATIONS
If the docking port will not be used for an extended period of time, it is recommended to push-close the iPod
docking drawer to cover the docking port and prevent damage.
1. Push-Open the iPod docking drawer.
2. Use the iPod adapter included with your iPod and insert it into the docking area. Your iPod can now be
inserted into the docking port by placing the connector on the bottom of the iPod onto the connector in
the docking bay.
Note - Please be careful when seating the iPod into the docking to avoid
damaging the 30-pin connector on the iPod or in the docking
system.
3. Press the POWER button to turn on the unit.
4. Press the FUNCTION button to select iPod mode. The iPod will start playing automatically and start
charging immediately.
5. Press the PLAY / PAUSE button to pause or resume iPod playback.
6. Adjust the sound level by pressing the VOLUME + / - button.
Note : The volume level cannot be adjusted using the volume control on your iPod after being
docked.
7. The iPod charges even during playback.
Note : The iPod will only charge in iPod, AUX or power “OFF” modes.
8. To remove the iPod from the unit, press and hold the PLAY/PAUSE button for three seconds to switch
off the device and then gently remove it from the docking connector.
9. Gently push the iPod docking drawer back into the unit and locked.
iPod playback control:
- Press the PLAY/PAUSE button to pause or resume the iPod playback;
- Press the Skip/Search Forward or Backward button to skip to the next or previous song;
- Press and hold the Skip/Search Forward or Backward button for fast-forwarding or fast-rewinding
during playback.

16
- Do not subject the unit to excessive force, shock, dust or extreme temperature.
- Do not tamper the internal components of the unit.
- Clean your unit with a dry cloth. Solvent or detergent should never be used.
- Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
- Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps
or motors.
Resetting the Unit
If the unit is subject to a power surge or electric shock, it is possible that the internal micro-controller may
lock up and the unit will not respond to any commands from the top panel controls or remote control.
1.In this event, unplug and then reconnect the AC power plug into the wall outlet.
2.Use a straightened paper clip, toothpick or similar objects to press the RESET button located at rear of
the main unit (see the below figure). The reset operation clears the system memory and all of your
previous settings will be erased. CAUTION: DO NOT USE SHARP, POINTED OBJECT TO PRESS
THE RESET BUTTON. IT MAY DAMAGE THE RESET SWITCH INSIDE THE UNIT.
If drop-outs or interruptions occur in the music during play, or if the disc fails to
play at all, its bottom surface may require cleaning. Before playing, wipe the disc
from the center outwards with a good soft cleaning cloth.
CARE AND MAINTENANCE
SLEEP TIMER
1. The sleep timer allows you to turnthe unit off after adesignated time isreached .
2. To activate the sleep timer, turn the uniton and eitherload a CD,dock your iPodor tune
to the desired radio station.
3. To select the sleep timer to turn the unitoff after 15, 30, 45or 60 minutes,press SLEEP button
1, 2, 3 or 4 times, respectively. The unit will play forthe selected lengthof time then automatically
turn off.
4. To turn the unit off before the selected length of time, press POWER button at anytime.
Note: If you activatethe sleep timerwhile a CDis playing, theunit will onlycontinue until the end of
the disc thenshut off automatically no matterwhat time the sleep timer isset to. For example, if your
CD is only30 minutes long and a 45-minute sleep timer is selected, the unitwill shut off approximately
1 minute afterthe CD finishes playing.
15
ALARM OPERATIONS
Setting the Alarm time
When the unit is in power off mode.
1. Press the MODE button once. The alarm clock display flashes.
2. To set the hour, press / button to set advance or reverse hour setting. Press and hold the button for
fast advance / reverse value.
3. To set the minute, press the VOLUME + / - button to set advance or reverse minute setting. Press and hold
the button for fast advance / reverse value.
4. Press the MODE button again. The alarm source icon flashes.
5. Press VOLUME + / - button to select wake up modes:
Note : - When “Wake to Radio” is selected, make sure the radio station you want to wake to is tuned.
- If “Wake to CD” or “Wake to iPod”,is selected but your iPod not been docked or a CD is not
inserted, the alarm source will be redirected to the Alarm Buzzer automatically when the alarm
time is reached.
6. To save all settings and exit the setting mode, press the MEM button.
7. To activate the daily alarm, press the ALARM ON/OFF button. A " " indicator appears on LCD display.
8. When the current time matches the alarm setting, the alarm sounds from the selected source.
Wake to Alarm Buzzer
• When the alarm time is reached, the buzzer alarm will sound for one minute.
st
• After the 1 alarm minute, it goes into Auto Snooze mode. The display shows the "SNOOZE" indicator.
The buzzer turns off for the snooze time (around 10 minutes) then comes on again.
• You may also activate the snooze function manually after the alarm sounds by pressing the SNOOZE button.
The buzzer stops for the snooze time then comes again.
• The snooze operation (including auto snooze and manual snooze) can be repeated by within the 50 minutes
from the set alarm time.
• To stop the alarm immediately after the buzzer sounds, you can also press the ALARM ON/OFF button.
It resets itself for the following day.
BUZ ----- Wake to Buzzer
RAD ----- Wake to Radio
iPod ----- Wake to iPod
CD ----- Wake toCD
Wake to Radio / CD / iPod
• When the alarm time is reached, the selected alarm source Radio, CD or iPod will automatically turn “ON”.
It starts softly and gradually becomes louder.
• It plays for 60 minutes then shuts off and resets itself for the following day ( without pressing the
snooze button).
• During the activation of the desired alarm source, you may press the SNOOZE button to activate the
snooze function. The alarm source stops for the snooze time (around 10 minutes) then turns
“ON” again. This manual snooze operation can be repeated within the 50 minutes from the set alarm time.
• To stop the alarm immediately after the alarm source sounds, you may also press the ALARM ON/OFF
button. It resets itself for the following day.
Snooze Function
• During the activation of the desired alarm source, you may press the SNOOZE button to activate the
snooze function. The alarm source stops for the snooze time (around 10 minutes) then turns
“ON” again. This manual snooze operation can be repeated within the 50 minutes from the set alarm time.
• This manual snooze operation can be repeated maximum five times.

TROUBLESHOOTING GUIDE
Symptom Possible Problem Solution
The unit does
not respond (no power)
AC Adaptor is not plugged into a
wall outlet or the connector is not
plugged into the power supply jack
on the back of the unit.
Plug the AC adaptor into a wall
outlet and plug the connector into
the supply jack on the unit.
Wall outlet is not functioning. Plug another device into the same
outlet to confirm the outlet is working.
Using no/wrong iPod Adaptor.
iPod does not install properly.
Make sure the dock insert is the
proper fit for your iPod.
Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it in the dock.
iPod does not
dock properly
iPod does not respond
to the speaker system
Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it on the dock.
Please make sure that your iPod is
working properly before docking into
the unit. Please refer to your iPod
manual for info on resetting the iPod.
iPod is not installed properly.
Your iPod is locked up.
Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it in the dock.
Please make sure your iPod is
working properly before docking into
the unit. Please refer to your iPod
manual for details on resetting.
iPod is not installed properly.
iPod is locked up/ frozen.
iPod battery has problem.
iPod does not
charge up
Slightly rotate the unit for the best
reception.
The reception at the set location is
poor.
AM band is too noisy
Decrease the volume. Volume level is set too high.
If the iPod original sound source is of
poor quality, distortion and noise are
easily noticed with high-power
speakers. Try a different audio source
such as a music CD.
If you are using an external sound
source like older generation of iPod,
try reducing the output volume on the
device itself. Also try turning bass
boost OFF or change the EQ setting.
Sound source is distorted.
Sound is distorted
Turn the unit off for a period of time or
lower volume.
This is normal.
Unit gets warm after
extended play at
high volume
CD Player does not play.
CD skips while playing.
CD mode is not selected.
CD is not installed or installed
incorrectly
Disc is dirty or scratched.
Press the CD onto spindle, printed
side facing up.
Wipe with cloth or use another disc.
Slide the FUNCTION switch to select
CD mode.
Select other modes for iPod charging
Unit turned to CD or radio mode
17
Printed in China
SPECIFICATIONS
SERVICE
Please refer to the instructions on the enclosed warranty card for returning your unit for service. When
returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible
Distributed in Australia by:
ROVEREY INTERNATIONAL
PO Box 3414
Nunawading
Vic 3110
Telephone: [phone]
Email Address: [email protected]
*The specification and external appearance of the set are subject to change without prior notice.*
leakage. We are not responsible for batteries returned with the product or for the cost of replacement.
Power Requirement
Main unit
DC input: DC10V / 1000mA
Battery Back-up for Clock 2 X DC 1.5V "AAA" (UM-4) Batteries
Remote Control 1 x CR2032 Lithium Battery
Frequency Range
Radio AM 522 ---- 1620 kHz, 9 kHz tuning step
Fm 87.5 ---- 108 MHz, 0.05 MHz tuning step
18