Jet M-708639M/T User manual

DC-1100A
DC-1100CK
Dust Collector
Staubfänger
Collecteur de poussière
Original:
GB
Operating Instructions
Translations:
D
Gebrauchsanleitung
F
Mode d´emploi
TOOL FRANCE SARL
9 Rue des Pyrénées
91090 LISSES
France
www.jettools.com
M-708639M/T, 708626CKM/CKT 2019-05

CE-Conformity Declaration
CE-Konformitätserklärung
Déclaration de Conformité CE
Product / Produkt / Produit:
Dust Collector / Staubfänger / Collecteur de poussière
DC-1100A / DC-1100CK
Stock Number: 708639M, 708639T / 708626CKM, 708626CKT
Brand / Marke / Marque:
JET
Manufacturer / Hersteller / Fabricant:
JPW (TOOL) FRANCE SARL, 9 Rue des Pyrénées, 91090 LISSES
France / Frankreich / France
We hereby declare that this product complies with the regulations
Wir erklären hiermit, dass dieses Produkt der folgenden Richtlinie entspricht
Par la présente, nous déclarons que ce produit correspond aux directives suivantes
2006/42/EC
Machinery Directive / Maschinenrichtlinie / Directive Machines
2014/30/EU
electromagnetic compatibility / elektromagnetische Verträglichkeit / compatibilité électromagnétique
designed in consideration of the standards
und entspechend folgender zusätzlicher Normen entwickelt wurde
et été développé dans le respect des normes complémentaires suivantes
EN ISO 12100 : 2010, EN 60204-1 : 2006+AC:2010, EN 55014-1 :2006 , EN55014-2: 1997+A2:2008
Responsible for the Documentation / Dokumentations-Verantwortung / Résponsabilité de Documentation:
Head Product-Mgmt. / Leiter Produkt-Mgmt. / Resp. Gestion des Produits
TOOL FRANCE SARL
2019-05-08 Christophe SAINT SULPICE, General Manager
TOOL FRANCE SARL, 9 Rue des Pyrénées, 91090 LISSES
France / Frankreich / France

GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new JET-product. This manual has been
prepared for the owner and operators of a JET DC-1100A / DC-1100CK dust collector to promote safety during installation,
operation and maintenance procedures. Please read and understand the information contained in these operating instructions
and the accompanying documents. To obtain maximum life and efficiency from your dust collector, and to use it safely, read this
manual thoroughly and follow instructions carefully.
…Table of Contents
1. Declaration of conformity
2. JET Warranty
3. Safety
Authorized use
General safety notes
Remaining hazards
4. Machine specifications
Technical data
Noise emission
Contents of delivery
5. Assembly and start up
Assembly
Dust collection
Mains connection
6. Machine operation
7. Maintenance and inspection
Cleaning filter
Changing collector bag
8. Trouble shooting
9. Environmental protection
10. Available accessories
1. Declaration of conformity
On our own responsibility we hereby
declare that this product complies with
the regulations* listed on page 2.
Designed in consideration with the
standards**.
2. Warranty
TOOL FRANCE SARL guarantees that
the supplied product(s) is/are free from
material defects and manufacturing
faults.
This warranty does not cover any
defects which are caused, either
directly or indirectly, by incorrect use,
carelessness, damage due to
accidents, repairs or inadequate
maintenance or cleaning as well as
normal wear and tear.
Further details on warranty (e.g.
warranty period) can be found in the
General Terms and Conditions (GTC)
that are an integral part of the
contract.
These GTC may be viewed on the
website of your dealer or sent to you
upon request.
TOOL FRANCE SARL reserves the
right to make changes to the product
and accessories at any time.
3. Safety
3.1 Authorized use
This dust collector is designed for
sucking wood dust only. Any other
application is not permitted and may
be carried out in specific cases only
after consulting with the manufacturer.
Materials such as liquids, metal
shavings, metal dust, screws, glass,
plastic or rock can cause sparks
and/or damage when coming into
contact with any part of the dust
collector.
The product is not suitable for use in
wet or humid environment.
Don’t use appliance in places with a
risk of explosion.
The proper use also includes
compliance with the operating and
maintenance instructions given in this
manual.
The dust collector must be operated
only by persons familiar with its
operation and maintenance and who
are familiar with its hazards.
The required minimum age must be
observed.
The dust collector must only be used
in a technically perfect condition.
Before connecting the dust collector to
electric power, all safety mechanisms
and covers must be mounted.
In addition to the safety requirements
contained in these operating
instructions and your country’s
applicable regulations, you should
observe the generally recognized
technical rules concerning the dust
collection on woodworking machines.
Any other use exceeds authorization.
In the event of unauthorized use of the
product, the manufacturer renounces
all liability and the responsibility is
transferred exclusively to the operator.
3.2 General safety notes
Read and understand the entire
instruction manual before attempting
assembly or operation of the air
cleaner.
Keep this operating instruction close
by the product, protected from dirt and
humidity, and pass it over to the new
owner if you part with the tool.
No changes to the dust collector may
be made.
Daily inspect the function and
existence of the safety appliances
before you start the air cleaner.
Do not attempt operation in this case,
protect the dust collector by
unplugging the power cord.
Always disconnect the dust collector
from the power source (unplug) before
servicing or changing filters.
During the changing or cleaning of the
filters it’s necessary to use a mask
(mask with filtration).
Never reach into the machine while it
is operating or running down.
To reduce the risk of injury from
moving parts, always keep inlet port
covered with the caps provided, if they
are not connected to a hose.
Make sure that the power cord does
not impede work and cause people to
trip.

Do not operate the machine under the
influence of drugs, alcohol or any
medication. Be aware that medication
can change your behaviour.
Keep children and visitors a safe
distance from the work area.
Never leave a running machine
unattended. Before you leave the
workplace switch off the unit.
Do not operate the electric tool near
inflammable liquids or gases.
Observe the fire fighting and fire alert
options, for example the fire
extinguisher operation and place.
Do not use the dust collector in a
dump environment and do not expose
it to rain.
Do not use this equipment to filter
volatile fumes or smoke.
Wood dust is explosive and can also
represent a risk to health.
Dust form some tropical woods in
particular, and from hardwoods like
beach and oak, is classified as a
carcinogenic substance.
Connection and repair work on the
electrical installation may be carried
out by a qualified electrician only.
Have a damaged or worn power cord
replaced immediately.
3.3 Remaining hazards
When using the machine according to
regulations some remaining hazards
may still exist.
Dust can cause injuries.
The use of incorrect mains supply or a
damaged power cord can lead to
injuries caused by electricity.
Danger of explosion if not properly
grounded.
4. Machine specifications
4.1 Technical data
Dust inlet Ø 150mm (2xØ 100mm)
Air flow Ø 150 1620 m³/h
Air flow Ø 100 1150 m³/h
Vacuum pressure 1700Pa
Collector bag capacity 200L
Overall DC-1100A:
(LxWxH) 940x510x2000mm
Net weight 48 kg
Overall DC-1100CK:
(LxWxH) 940x510x1830mm
Net weight 71 kg
Mains 230V ~1/N/PE 50Hz
Output power 1,1kW (1,5HP) S1
Reference current 4.8 A
Extension cord (H05VV-F) 3Cx1.5mm²
Installation fuse protection 10A
Mains 400V ~3L/PE 50Hz
Output power 1,1kW (1,5HP) S1
Reference current 2 A
Extension cord (H05VV-F) 4Cx1.5mm²
Installation fuse protection 10A
4.2 Noise emission
Acoustic pressure level
(EN ISO 11202): LpA 80 dB(A).
The specified values are emission
levels and are not necessarily to be
seen as safe operating levels.
As workplace conditions vary, this
information is intended to allow the
user to make a better estimation of the
hazards and risks involved only.
4.3 Content of delivery
Filter bag (DC-1100A)
Canister filter (DC-1100CK)
Mobile casters
Cone support bracket
Cone
Dust inlet 2 x 100 mm
Set of 5 collection bags
5. Assembly and start up
5.1 Assembly
If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the unit!
Dispose of the packing in an
environmentally friendly manner.
Base:
Install four casters to the under side of
the base with lock washer and nut (Fig
1)
Fig 1
Motor and fan assembly:
Attach the motor and fan assembly (A)
to the base, using 4 hex cap screws
(B) and flat washers.
Fig 2
Attach inlet guard (A, Fig 3) to fan
housing using 8 pan head screws (B).
Fig 3
Press the inlet port (C) and secure
with provided screw.
Attention:
To reduce the risk of injury from
moving parts, always keep inlet port
covered with the caps provided, if they
are not connected to a hose.

Collector Housing:
Attach 3 support brackets (A, Fig 4) to
the base using 6 hex cap screws (B)
and washers.
Fig 4
Install the housing (A, Fig 5) with 6 hex
cap screws (C).
Fig 5
Cone Assembly:
Mount the cone support bracket (I, Fig
6) to the housing with 4 hex cap
screws (J) and nuts.
Mount the cone (K) from beneath with
hex cap screw (H), washer and nut.
Fig 6
Hose Assembly:
Attach the hose (A, Fig 7) with 2
provided clamps (B).
Fig 7
Collector bag:
Fold the plastic bag over the top of the
snap ring (E, Fig 8).
Fig 8
Insert the snap ring (E) of the collector
bag into the bottom of the housing at
an angle. Pull down until it engages in
the grove (F, Fig 9)
Fig 9
Filter bag (DC-1100A):
Attach the bag support rods (A, B Fig
10).
Fig 10
Install the filter bag with retainer strap
(D).
Canister filter (DC-1100CK):
Mount the handle (I, Fig 11) with 2 hex
nuts (G), flat wasshers (H) and a lock
washer (J).
Fig 11
Mount the canister filter with 4 knobs
(K) on the collector housing.