Jet JRF-14R User manual

OWNER'S MANUAL
JRF-14R Deluxe Rip Fence w/Resaw
JET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:[phone]
A WMH Company Auburn, WA 98071-1349 Fax: [phone]
www.jettools.com e-mail [e-mail] M-708718R 05/01

2
Assembly
1. Disconnect the machine from the power source,
unplug.
2. Mount the rear rail (A, Fig. 1) to the bandsaw
table using two M6x20 hex cap screws, two 1/4"
lock washers and two 1/4" flat washers (B, Fig.
1). Do not tighten.
3. Mount the front rail (A, Fig. 2) to the bandsaw
table using two M6x20 hex cap screws, two 1/4"
lock washers and two 1/4" flat washers (B, Fig.
2). Do not tighten.
4. Mount the guide rail (A, Fig. 3) to the front rail
using three M6x20 hex cap screws, three 1/4"
lock washers and three 1/4" flat washers.
5. Attach the fence to the fence body using four
hex cap bolts, four lock washers and four flat
washers (A, Fig. 4).

3
6. Thread a hex hut (A, Fig. 5) onto the sliding pad
(B, Fig. 5) and insert through the fence and rear
hook (C, Fig. 5). Secure in place using a hex
nut, lock washer and flat washer (D, Fig. 5).
7. Place fence assembly onto the guide rail. The
rear hook should engage the rear rail, Figure 5.
8. The gap between the bottom of the fence and
the table top should be the same across the
entire table.
9. The front rail, rear rail and sliding pad can be
raised or lowered to allow for an equal gap. At
the same time make sure the fence is
perpindicular to the table top (A, Fig. 6).
10. Tighten front and rear rails.
11. Position the fence along the blade and tighten
the handle. To make an adjustment loosen four
hex cap bolts (A, Fig. 7) and align the fence with
the blade. Tighten bolts.
12. Check to see that the pointer (B, Fig. 7) is
aligned with the zero marking on the guide rail.
If adjustment is necessary loosen the screw that
holds the pointer in place. Adjust as necessary.
13. For resawing operations attach the post (A, Fig.
8) to fence with the hand knob. There is a
slotted hole in the fence that will accommodate
the resaw kit. Position the post so that it is
centered with the front edge of the blade.

4
JRF-14R Parts List
Index Part
No. No. Description Size Quantity
1...........JWBS14-F01....................JET Plaque.................................................. .................................................................1
2...........JWBS18-431....................Knob ........................................................... .................................................................1
3...........JWBS18-432....................Lock Handle................................................ .................................................................1
4...........JWBS18-433....................Lock Plate................................................... .................................................................1
5...........JWBS18-434....................Pad............................................................. .................................................................5
6...........JWBS18-435....................Pin .............................................................. .................................................................1
7...........JWBS18-436....................Pin .............................................................. .................................................................1
8...........JWBS18-430....................Fence Body................................................. .................................................................1
9...........JWBS18-422....................Pointer ........................................................ .................................................................1
10.........JWBS18-441....................Star Washer................................................ .................................................................1
11.........JWBS18-440....................Screw..........................................................3/16 x 14...................................................1
12.........JWBS14-F12....................Fence.......................................................... .................................................................1
13.........JWBS18-439....................Flat Washer*...............................................5/16 ..........................................................4
14.........TS-0720081 .....................Lock Washer*..............................................5/16 ..........................................................4
15.........TS-0081031 .....................Hex Cap Bolt*..............................................5/16 x 3/4..................................................4
16.........JWBS14-F16....................Knob*.......................................................... .................................................................1
17.........JWBS18-444....................Sliding Pad* ................................................ .................................................................1
18.........TS-0561011 .....................Hex Nut*......................................................1/4"...........................................................2
19.........TS-0680021 .....................Falt Washer*...............................................1/4"...........................................................8
20.........TS-0720071 .....................Lock Washer*..............................................1/4"...........................................................8
21.........JWBS18-445....................Rear Hook*.................................................. .................................................................1
22.........JWBS14-F22....................Resaw Kit*................................................... .................................................................1
23.........JWBS14-F23....................Scale........................................................... .................................................................1
24.........JWBS14-F24....................Guide Rail................................................... .................................................................1
25.........JWBS14-F25....................Front Rail.................................................... .................................................................1
26.........TS-1482041 .....................Hex Cap Bolt*..............................................M6 x 20.....................................................7
27.........JWBS14-F27....................Rear Rail..................................................... .................................................................1
.............JWBS14-HK.....................Hardware Kit (not shown) ............................ ...................................................................
• Items marked with an * come with the hardware Kit