JETWAY MBD-J-JNC9VL-H81 User manual

TECHNICAL MANUAL
Of
Intel H81 Express Chipset
Based Mini-ITX M/B
NO. G03-NC9VL-F
Revision: 1.0
Release date: January 16, 2014
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

i
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize
pollution and ensure environment protection of mother earth, please recycle.

ii
ENVIRONMENTAL SAFETY INSTRUCTION ........................................................................... iii
USER’S NOTICE ....................................................................................................................... iv
MANUAL REVISION INFORMATION ....................................................................................... iv
ITEM CHECKLIST ..................................................................................................................... iv
CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD ................................................................................ 1
1-2 SPECIFICATION ......................................................................................................... 2
1-3 LAYOUT DIAGRAM .................................................................................................... 3
CHAPTER 2 HARDWARE INSTALLATION
2-1 JUMPER SETTING ..................................................................................................... 7
2-2 CONNECTORS AND HEADERS ................................................................................ 10
2-2-1 CONNECTORS ............................................................................................. 10
2-2-2 HEADERS ..................................................................................................... 15
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERING SETUP ..................................................................................................... 20
3-2 BIOS MENU SCREEN ................................................................................................ 21
3-3 FUNCTION KEYS ....................................................................................................... 21
3-4 GETTING HELP .......................................................................................................... 22
3-5 MENU BAR.................................................................................................................. 22
3-6 MAIN MENU ................................................................................................................ 23
3-7 ADVANCED MENU ..................................................................................................... 24
3-8 CHIPSET MENU .......................................................................................................... 30
3-9 BOOT MENU ............................................................................................................... 34
3-10 SECURITY MENU ....................................................................................................... 36
3-11 SAVE & EXIT MENU ................................................................................................... 37
TABLE OF CONTENT

iii
Environmental Safety Instruction
 Avoid the dusty, humidity and temperature extremes. Do not place the product in
any area where it may become wet.
 0 to 60 centigrade is the suitable temperature. (The figure comes from the request
of the main chipset)
 Generally speaking, dramatic changes in temperature may lead to contact
malfunction and crackles due to constant thermal expansion and contraction from
the welding spots’ that connect components and PCB. Computer should go
through an adaptive phase before it boots when it is moved from a cold
environment to a warmer one to avoid condensation phenomenon. These water
drops attached on PCB or the surface of the components can bring about
phenomena as minor as computer instability resulted from corrosion and oxidation
from components and PCB or as major as short circuit that can burn the
components. Suggest starting the computer until the temperature goes up.
 The increasing temperature of the capacitor may decrease the life of computer.
Using the close case may decrease the life of other device because the higher
temperature in the inner of the case.
 Attention to the heat sink when you over-clocking. The higher temperature may
decrease the life of the device and burned the capacitor.

iv
USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED
OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN
PERMISSION OF THE MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AND WE
DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME
WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY
KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA,
INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE
REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE
USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT
INTENT TO INFRINGE.
Manual Revision Information
Reversion Revision History Date
1.0 First Edition January 16, 2014
Item Checklist
 Motherboard
 DVD for motherboard utilities
 User’s Manual
 Cable
(s)
 I/O Back panel shield

1
Chapter 1
Introduction of the Motherboard
1-1 Feature of Motherboard
 Intel® H81 express chipset
 Support LGA 1150 CPU socket Intel® Core™ i7 processors / Intel® Core™ i5
processors / Intel® Core™ i3 processors / Intel® Celeron™ processors
 Support DDRIII 1333/1600 SO-DIMM up to 16GB and dual channel function
 Integrated with Intel i217LM Gigabit Ethernet LAN chip
 Integrated with RealTek ALC662-VD-GR 6-channel HD Audio Codec
 Support USB 3.0 data transport demands.
 Support 1 * Serial ATAII (3Gb/s) & 1 * Serial ATAIII (6Gb/s) Devices
 Support PCIE 2.0 x1 slot and Mini_half PCI-E slot
 Support mSATA slot
 Support CPU Smart FAN
 Supports ACPI S3 Function
 Compliance with ErP Standard
 Support Watchdog Timer Technology

2
1-2 Specification
Spec
Description
Design  Mini-ITX form factor 6 layers ; PCB size: 17.0x17.0cm
Chipset  Intel H81 Express Chipset
CPU Socket
 Support Intel
®
LGA 1150 Socket Core™ i7 Processor, Intel
®
Core™ i5 Processor, Intel® Core™ i3 Processor, Intel®
Celeron™ processors
* for detailed CPU support information please visit our website
Memory Slot
 DDRIII SO-DIMM slot x 2
 Support DDRIII 1333/1600 MHz SO-DIMM up to 16GB
 Support dual channel function
Expansion Slot  1* PCIE x 1 slot
 1* Half-size Mini-PCIE slot
Storage
 1* SATA III 6G/s connector
 1* SATA II 3G/s connector
 1 * full-size M-SATA slot
Gigabit LAN Chip
 Integrated with Intel i217LM Gigabit LAN PHY chip
 Support Fast Ethernet LAN function of providing
10/100/1000 Mbps Ethernet data transfer rate
Audio Chip  Realtek ALC662-VD-GR 6-channel Audio Codec integrated
 Audio driver and utility included
BIOS  64M DIP Flash ROM
Multi I/O Rear Panel I/O:
 1* 19V DC-in power jack
 2* USB 3.0 port
 1* DVI-I port
 1* HDMI port
 1* RJ-45 port
 2* USB 2.0 port

3
 1*LINE-OUT jack
 1* MIC-IN jack
Internal I/O Connectors& Headers:
 1 *2-pin ATX19V internal power connector
 1 * SATA power connector
 1 * PS2 Keyboard / Mouse header
 1 * Case open header
 1* CPUFAN header + 1* SYSFAN header
 1*LVDS connector + 1*LVDS inverter
 1*Speaker connector
 1*Front panel audio header
 1*DMIC header
 2 * 9-Pin USB 2.0/1.1 header for four USB 2.0/1.1 ports
 1*Front panel header
 1*CIR header
 1*Mon_SW header
 1* LAN activity LED header
 1* Blue tooth activity LED header
 1* WIFI activity LED header
1-3 Layout Diagram
Rear IO Diagram
MIC-IN
Line-OUT
RJ-45 LAN Port
DVI-I Port
USB 2.0 Ports
19V DC
Power-in
Jack
USB 3.0 Ports
HDMI Port

4
Motherboard Internal Diagram
ATX 19V Power
Connector
Intel LGA1150
CPU Socket
Intel H81 Chipset
PCI Express x1 slot
SATAIII Port
(SATA1)
Front Panel
Audio Header
Front Panel
Header
CPUFAN Header
CIR Header
RJ-45 LAN Port
USB 2.0 Port
USB 3.0 Ports
19V DC
Power-in Jack
DVI-I Port
HDMI Port
Line-OUT
MIC-IN
Speaker
Connector
USB 2.0 Header
USB 2.0 Header
SATA Power
Connector
(SATA_POWER)
48-bit LVDS
Connector
LVDS Inverter
DDRIII SODIMM Slots
Half-size
Mini-PCIE Slot
Full-size MSATA Slot
DMIC Header
SYSFAN Header
PS2 KB & MS Header
MON_SW Header
SATAII Port
(SATA2)
LAN1LED1 Header
WIFI_LED Header
BL_LED Header

5
Motherboard Jumper Position
JP1
JP3
JBAT
JP4
JP2
COPEN
JP5

6
Connectors
Connector
Name
DC_IN DC Adapter 19V
ATX2P DC19V Power Connector
USB1 USB 3.0 Connector X2
DVI-I DVI-I Connector
HDMI High-Definition Multimedia Interface
LAN RJ-45 LAN Connector
USB3 USB 2.0 Connector X2
FP_HP Front Panel Head Phone Connector
FP_MIC Front Panel MIC Connector
SATA_POWER SATA Power Connector
SATA1 SATAIII Connector
SATA2 SATAII Connector
SPEAK_CON Speaker Connector
MINI_FULL Full-size MSATA Connector
MINI_HALF Half-size Mini-PCIE Connector
LVDS LVDS Connector
INVERTER Panel Inverter Connector
SYSFAN,CPUFAN FAN Connector X2
Headers
Header Name Description
FP_AUDIO Front Panel Audio Header 9-pin Block
DMIC_CON DMIC Header 4-pin Block
F_USB1/F_USB2 USB Header X2 9-pin Block
INVERTER Panel Inverter connector 8-pin Block
JW_FP
Front Panel Header(PWR LED/
HD LED/Power Button /Reset)
9-pin Block
CIR_CON CIR Header 7-pin Block
MON_SW Monitor Switch Header 2-pin Block

7
PS2KBMS PS2 Keyboard & Mouse Header 6-pin Block
LAN1LED1 LAN Activity LED Header 2-pin Block
WIFI_LED WIFI Activity LED Header 2-pin Block
BL_LED Blue Tooth Activity LED Header 2-pin Block
Jumper
Jumper Name Description
JP1 Inverter VCC 12V/19V Select 3-pin Block
JP2 LCD Power Source Setting 4-pin Block
JP4 MINI_ HALF Slot VCC 3.3V/ 3.3VSB Select
3-pin Block
JBAT CMOS RAM Clear Function Select 3-pin Block
COPEN1
Case Open Message Display Function 2-pin Block
Chapter 2
Hardware Installation
2-1 Jumper Setting
(2) JP1 (3-pin): INVERTER VCC 12V/19V Select
2-3 Closed: Inverter VCC= 19V.
JP1→INVERTER VCC
1-2 Closed: Inverter VCC= 12V;
1
3
1
3

8
(2) JP2 (4-pin): LCD Power Source Setting
JP2→LVDS Backlight VCC
4-6 Closed: LVDS
VCC= 12V.
2
4
6
3-4 Closed: LVDS
VCC= 5V;
2-4 Closed: LVDS
VCC= 3.3V;
3
5
1
5
6
4
2
3
1
6
4
2
5
3
1
(3) JP4 (3-pin): MINI_HALF Slot VCC3.3V/ 3.3VSB Select
2-3 Closed: MINI_HALF Slot VCC=3.3VSB.
JP4→MINI_HALF Slot VCC
1-2 Closed: MINI_HALF Slot VCC= 3.3V;
1
3
1
3

9
(4) JBAT (3-pin): Clear CMOS Function Setting
CMOS Clear Setting
2-3 Closed：Clear CMOS.
JBAT
1-2 Closed： Normal；
3
1
3
1
(5)COPEN1 (2-pin): Case Open Message Display Function Select
COPEN1
1
2
Case open function
GND
Pin 1-2 Closed: When Case open function pin short to GND, The Case open function
was detected. When Used, needs to enter BIOS and enable ‘Case Open Detect’
function. In this case if your case is removed, next time when you restart your
computer , a message will be displayed on screen to inform you of this.

10
2-2 Connectors and Headers
2-2-1 Connectors
(1) Rear Panel Connectors
(2) ATX2P (2-pin block): ATX19V Type power connector
Pin1
Pin No. Definition
1 GND
2 +19V
MIC-IN
Line-OUT
RJ-45 LAN Port
DVI-I Port
USB 2.0 Ports
19V DC
Power-in
Jack
USB 3.0 Ports
HDMI Port

11
(3) SATA_POWER (15-pin block): SATA power connector
Pin1
SA TA Power C onnector
Pin NO.
Definition
Pin 1 3.3V
Pin 2 3.3V
Pin 3 3.3V
Pin 4 GND1
Pin 5 GND1
Pin 6 GND1
Pin 7 +5V
Pin 8 +5V
Pin 9 +5V
Pin 10 GND2
Pin 11 NC
Pin 12 GND2
Pin 13 +12V
Pin 14 +12V
Pin 15 +12V
(4) SATA1 (7-pin): SATA III Port connector
This connector is a high-speed SATAIII port that supports 6 GB/s transfer rate.
Pin No. Defnition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND

12
(5) SATA2(7-pin): SATA II Port connector
This connector is a fast-speed SATAII port that supports 3 GB/s transfer rate.
Pin No. Defnition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
(6)SPEAK_CON (4-pin block): Speaker Connector
Pin1
SPEAK _CON
Pin No.
Definition
1 L-
2 L+
3 R+
4 R-

13
(7) LVDS(40-pin): 48-bit LVDS Header
Pin NO.
Pin Define
Pin NO.
Pin Define
Pin 1 LVDSA_DATAP3 Pin 2 LVDSA_DATAN3
Pin 3 LVDSA_DATAP2 Pin 4 LVDSA_DATAN2
Pin 5 LVDSA_DATAP1 Pin 6 LVDSA_DATAN1
Pin 7 LVDSA_DATAP0 Pin 8 LVDSA_DATAN0
Pin 9 LVDSB_DATAP3 Pin 10 LVDSB _DATAN3
Pin 11 LVDSB_DATAP2 Pin 12 LVDSB _DATAN2
Pin 13 LVDSB_DATAP1 Pin 14 LVDSB _DATAN1
Pin 15 LVDSB_DATAP0 Pin 16 LVDSB _DATAN0
Pin 17 GND Pin 18 LCD_VCC
Pin 19 LCD_VCC Pin 20 LCD_VCC
Pin 21 NC Pin 22 EDID_3V3
Pin 23 GND Pin 24 GND
Pin 25 GND Pin 26 LVDS_CLKAP
Pin 27 LVDS_CLKAN Pin 28 GND
Pin 29 GND Pin 30 GND
Pin 31 LVDS_DDC_CLK Pin 32 LCD_BKLT_EN
Pin 33 LCD_BKLT_PWM Pin 34 LVDS_CLKBP
Pin 35 LVDS_CLKBN Pin 36 BKLT_PWR
Pin 37 BKLT_PWR Pin 38 BKLT_PWR
Pin 39 NC Pin 40 LVDS_DDC_DATA

14
(8) INVERTER (8-pin): LVDS Inverter Connector
Pin 1
Pin No. Definition
1 Backlight Enable
2 Backlight Duty
3 PVCC
4 PVCC
5 GND
6 GND
7 Backlight +SW
8 Backlight -SW
(9) CPUFAN/SYSFAN (4-pin): Fan Connector
CPUFAN
SYSFAN
Pin1
GND
Fan Clock
Control
+12V Fan Power
Pin1
GND
+12V Fan Power
Fan Clock
Conrol

15
2-2-2 Headers
(1) FP_AUDIO (9-pin): Line-Out, MIC-In Header
This header connects to Front Panel Line-out, MIC-In connector with cable.
Line-Out, MIC Headers
FP_AUDIO
Pin 1
MIC2-L
LINEOUT2-L
MIC2-R
LINEOUUT2-R
SENSE
GND
MIC2 RTU
AUD_
JD
2
LINE2 RTU
(2) DMIC_CON (4-Pin): DMIC Header
VCC3
DMIC_CLK
GND
Pin 1
DMIC_DATA