Joerns Healthcare Oxford User manual

Redefining patient handling
Bathing Hoists
Joerns
Healthcare
Oxford®

Your complete range of
bathing hoists
Dipper
The Dipper is for use at swimming pools, therapy pools and quayside
locations with a specication that is highly functional and easy to use.
Its design assures full integration with the pool or quayside environment.
The market leading Dipper is a proven, reliable and safe method of
gaining access to the water and has a weight capacity of 140kg (22st).
The Dipper hoist can be used either with a spreader bar and sling
arrangement or the Ranger transporter chair.
Combined, the Oxford Dipper, Mermaid and Ranger are one of the
most functional and versatile bathing systems, allowing patients to
bathe in safety and complete comfort.
The compatibility of these three products is unique and provides
the key solution to keeping patient transfers to a minimum.
These products are ideally suited to the following environments:
nDipper: Pool and quayside
nRanger: A bath and pool transit system
nMermaid: Bath only
Dipper with spreader bar and sling arrangement
Dipper and Ranger transporter system
For maximum exibility when installing, the Dipper is available with 3 oor xing options. This ensures the Dipper is suitable for use in any location.
Dipper floor fixing options
Oxford
Bathing Hoists

Oxford
Bathing Hoists
Ranger
The Ranger transporter system provides easy access to bath-side or pool-side
locations. The Ranger transporter can also be used as a toileting aid and comes
with several options.
Standard Features:
nCommode seat
nSafety arms with connecting strap
nAdjustable footrest
Mermaid
The Mermaid hoist is a xed bath-side hoist that enables patients to safely
transfer in and out of the bath. The Mermaid is available in both electric
and manual versions and can be xed either to the side or end of the bath.
The Mermaid can also be used with either a xed seat option or the Ranger
transporter system.
Mermaid (Electric) with Ranger seat
Mermaid features & options
nElectric or manual options
n Wooden and concrete oor xings are supplied as standard
n Optional side or end t conguration, safety arms, commode seat and electric retro-t
nFixed seat or Ranger transporter system
nEmergency stop/emergency raise (electric option)
nDetachable battery pack (electric option)
nHand control (electric option)
Mermaid (Manual) with xed seat option
Options:
nMD footrest (fabric)
nBed pan commode
nShower seat
Ranger transporter

© 2011, Joerns Healthcare
0503/000468104.UK/CJ Rev. D
Specications may vary due to manufacturing tolerances
Electrical Specications
Battery 1 X 12 volt rechargeable sealed lead acid type
Battery capacity 3.2 Ampere hours
Charger rated input 230Vac 50/60Hz
Charger rated output 27.4/29.0 [email protected]
Electrical Shock Protection
Charger - class II
Lift - internal power source
Degree of shock protection
Charger - Type B
Lift - Type B
Intended operating environment : >+5º <+40º
Outside this environment functionality and
safety may be compromised
Warranty
The Oxford bathing range comes with a 12 month warranty as
standard. Please refer to your user manual for further information.
Technical specifications
Oxford
Bathing Hoists
Specification Mermaid
Safe Working Load 125 kg (19.6 st)
Maximum Height to Base of Seat 740 mm
Minimum Height to Base of Seat 140 mm
Maximum Seat Travel 485 mm
Maximum Seat Width 450 mm
Maximum Width Between Arms 395 mm
Maximum Seat Depth 410 mm
Centre of Seat to Centre of Mast 430 mm
Maximum Seat Turning Radius 850 mm
Maximum Seat Turning Radius (with end tting arm option) 865 mm
Minimum Clearance from Mast (to allow for seat rotation) 1000 mm
Total Weight - Mermaid Manual 29 kg
Total Weight - Mermaid Electric 37 kg
Specification Dipper
Safe Working Load 140 kg (22 st)
Boom Length 1498 mm
Height (socket A & B, boom lowered) 1422 mm
Height (socket A & B, boom full elevation) 2108 mm
Base of Seat Above Floor Level (socket A & B) 889 mmm
Base of Seat Below Floor Level (socket A & B) 914 mm
Height (socket C, boom lowered) 1572 mm
Height (socket C, boom full elevation) 2258 mm
Base of Seat Above Floor Level (socket C) 1039 mm
Base of Seat Below Floor Level (socket C) 764 mm
Weight - Mast Assembly 15.4 kg
Weight - Boom Assembly 10.4 kg
Weight - Chair Support Tube 3.6 kg
Weight - Ranger Seat 4.5 kg
Weight - Ranger Chassis 8.7 kg
Weight - Spreader Bar Assembly 1.7 kg
Specification Ranger Seat
Maximum Height to Base of Seat 740 mm
Minimum Height to Base of Seat 740 mm
Maximum Seat Travel 485 mm
Maximum Seat Width 360 mm
Maximum Width Between Arms 430 mm
Maximum Seat Depth 410 mm
Centre of Seat to Centre of Mast 430 mm
Maximum Seat Turning Radius 840 mm
Maximum Seat Turning Radius (with end tting arm option) 890 mm
Minimum Clearance from Mast (to allow for seat rotation) 1000 mm
Total Weight - Ranger Chair 13.3 kg
Specification Ranger Transporter
Maximum Width 610 mm
Maximum Depth 560 mm
Maximum Height 610 mm
Seat Height 510 mm
Seat to Footrest 430 mm - 480 mm
Oxford®
Joerns Healthcare Limited
Drakes Broughton Business Park, Worcester Road, Drakes Broughton
Pershore, Worcestershire, WR10 2AG United Kingdom
(T) [phone] (F) [phone]
www.joerns.co.uk • email: [email protected]