John Lewis Franklin 820 39501 User manual

Franklin Dining Chair
Stock number: 820 39501
H77 W46 D55cm

1
Thank you for purchasing the John Lewis & Partners Franklin Dining Chair. Please read the instructions and
warnings carefully before use, to ensure safe and satisfactory operation of this product.
At John Lewis & Partners, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to ensure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis & Partners Team
5mins
Tools required
People to assemble
Time to assemble
05/09/2022

03456 049 049
Important safety information
Warnings
The product should only be used on firm, level ground.
Keep small parts out of reach of children.
Ensure the product is fully assembed as illustrated before use.
Do's
Check the pack and make sure you have all the parts listed.
Check all screws or bolts aretightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don't
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to contruct as overtightening and panel failure may occur.
John Lewis
2
05/09/2022

Your Chair
Ref Description Dimensions Qty
Chair 46cm x 55cm x 77cm 1
50cm x 44cm x 4cm 1
1
2
3
Seat cushions
2
1
05/09/2022

4
Product assembly
Step 1
Parts, fittings and tools
Place the seat cushions (2) on the chair and tie the cord to the back legs of the chair.
820 39501
1 2
Franklin Dining Chair
05/09/2022
1
2

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
5
05/09/2022
Care and maintenance
How to care for your outdoor wooden furniture
Your furniture is made from solid FSC Acacia with a hand-applied oil finish. This oil finish helps maintain the appearance of your
furniture as well as helps reduce the effects of weathering. To help maintain the furniture's appearance, we recommend that you
re-finish your furniture each year. This can be done by lightly scrubbing with a brush, warm water and a small amount of washing-up
liquid, waiting for the furniture to completely dry, then re-apply a branded outdoor furniture oil with a cloth and allowing it to dry.
Wash your outdoor furniture annually, scrub with soapy water followed by a thorough rinse. (Do not use a power washer, it will
damage the wood).
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Wood is a natural material, it will expand and contract under different weather conditions causing small fractures to develop
along the grain. This is not a fault and adds to the character and beauty of the product.
We recommend that all garden furniture is covered when not in use and stored for winter. Ensure your furniture is clean and
completely dry The cover must be breathable to prevent mildew and/or mould developing. If storing away, ensure the space is
not heated but dry with good airflow.
Do not stand on this product
Do not tip back on the chair
Maximum Load Capacity: 110kg
Retain these instructions for future reference
Your feedback is very important to us and we would love to hear your comments on you new furniture. Please visit our website
to leave a review. Thank you.
To keep outdoor cushions in the best possible condition, we recommend keeping them covered when not in use and/or in wet
conditions (using a breathable cover) and store them inside over winter. Do not store in polythene bags or they may develop
mould.
To clean the cushions, remove the covers and gently spot clean using upholstery shampoo or warm soapy water ( with a mild
detergent) to blot out any stains as soon as they occur.
How to care for your outdoor cushions
Retain these instructions for future reference.